-
Posts
331 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Malarkey
-
-
Is it legal for USPSA production class?
Sent from my iPad using Tapatalk
i would say so, since they come stock on the shadow models.
-
Lowest I've been able to get is DA 3.25lbs and SA 1.75lbs.
This is a fully modded shadow with everything polished up running a 7.5lb Dan Wesson hammer spring.
It's to light like that tho, I run it with a 11.5 hammer spring.
So it looks like the ideal poundage is between 2 and 3#'s right? I don't want to have any accidental discharges on a stage.
-
So after my polishing/mods the SP01 was 7 pounds, 4 oz DA, 2 pounds, 11.6 ounces SA and a Shadow with all the same springs/polishing, but without the firing pin block/lifter was 5 pounds, 7 ounces DA, 2 pounds, 7 ounces SA. Keep in mind that these results are with an 11.5# hammer spring, which when combined with an extended firing pin and reduced power firing pin return spring will set off most small pistol primers (I haven't tried Tula or Wolf); with an 8.5# hammer spring and Federal primers, you can go much lower, but I feel like it gets a little mushy at that point.
I plan on using this like my guidebook. This post is actually what inspired this thread. Great workout mad scientist
-
Sounds like it is worth taking a look into. I just hate to spend the $35 and not get any benefit out of it.
-
Is the extended mag release from the Shadow line a significant improvement over the stock SP-01 mag release or does the stock do just fine in a USPSA/IDPA environment?
-
CZ 75 SP-01, DA-7lb 4oz, SA-2lb 6oz, followed Atlas's guide here in the forum. I used the CZC comp hammer, CZ 85 trigger, CGW Reduced power TRS, CGW SRS-2 kit, CGW Type 2 Disco, along with a lot of polishing. I used the 11.5lb hammer spring from the SRS-2 kit. It was night and day difference from stock.
Those are the same components that i am going to be working with. Did you have to work on the timing at all once you had everything together?
-
Does an Accu Shadow count? DA ~4.5#, SA~2#, using 8.5# main spring and federal primers.
Accu Shadow definitely counts. I am also interested if the Shadows are the only ones capable of getting into the low 2# or under SA and 4# DA. I've got some CGW parts ready to put in as soon as this SP-01 emerges from this snow storm.
-
As I am sitting here in snowmagedon, anxiously waiting for the arrival of my new purchase to arrive at the local gun shop (A stock SP-01) I would like to see what poundage you have achieved in your SP-01,
what model it is and what you did to get it there. Ultimately I am looking for the latest and greatest ideas and methods to recreate on my own SP-01 whenever it makes it.
Format as follows:
Gun/Model/DA lbs/SA lbs/ What You did to get there/pictures if you have them.
Go!
CZ Trigger Weight Contest
in CZ
Posted
Does it require the federal match grade primers or do the standard blue box primers work?