-
Posts
331 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Malarkey
-
-
Definitely do so if it doesn't arrive : That's one thing they are good for : Good luck
PayPal refunded the purchase. Only took a day or two.
Sent from my iPhone using Tapatalk -
DID YOU happen to Use Paypal? I asked because I had a similar problem with Rexfirearms on a $22.00 part. They claimed it was lost in Transit. So I complained to Paypal and got my $$ the same day >
Yeah, I reported it through PayPal yesterday. It said I could escalate it to a claim on January 15th.
Sent from my iPhone using Tapatalk -
Update on the trigger I ordered back in November. Has anyone else had issues ordering one of these?
Sent from my iPhone using Tapatalk
-
Ok. But that's strange, when I order their holster and it shipped fast.
I emailed to see if this was a normal time and they said 10-15 days. So it could come any day at that rate. Here is what the tracking says.
Sent from my iPhone using Tapatalk -
Any review on the new trigger yet?
I ordered one on the 22nd, looks like it’s still waiting to ship out of Slovenia based on the tracking information.
Sent from my iPhone using Tapatalk -
Good news!!! New Alu triggers are up!
https://www.rexfirearms.com/product-page/rex-zero-1-sport-trigger
Looks like they have also added all of the OEM Alpha parts into the store as well.
Sent from my iPhone using Tapatalk -
Sorry for the poor lighting, but looks like 42.7oz with the basepad and empty mag inserted.
Sent from my iPhone using Tapatalk
It was also a USPSA box, and I believe it is on the tighter end of the acceptable tolerances.
Sent from my iPhone using Tapatalk -
IDPA weight.....43oz max and that gun stock is around 42......And, was that a box for IDPA or USPSA? Thanks!
Sorry for the poor lighting, but looks like 42.7oz with the basepad and empty mag inserted.
Sent from my iPhone using Tapatalk -
How much more do they weigh? At stock that thing is real close to weight.
I can weight them when I get home. It should be good for USPSA weight, are you talking about the IDPA weight?
Sent from my iPhone using Tapatalk -
Picked up a set of the Henning pro Production Basepads. They fit the box.
Sent from my iPhone using Tapatalk -
It should work just fine. With extended firing pin it works with 15 or even 14lbs hammer springs. Couldn't get 13lbs to test yet, to see if it works with soft primers.
But for such light springs also the hammer must be from Zero1, it is a little havier compared to Alpha hammer.
Also I would love to see if Grey guns would get hands on the Alpha and worked their magic on it.
FYI,
I swapped the 17lb hammer spring and sear spring. The FP springs aren’t the same as a note. I loaded a primer only empty case with Federal/CCI/S&B and it set all three off no problem in double action. Good hits with a 17. I’d like to try out a 15lb if I can find one. Any ideas on where the best place to get one would be?
Sent from my iPhone using Tapatalk -
Experiment time. Ordered a Grey Guns master spring kit for the 226 series. Going to see how compatible everything in here is with the Rex Alpha. Before I broke it down I swapped in the 17# hammer spring and it felt like butter in double action. Lighter and zero stacking compared to the springs that came with the gun. Seemed to have a solid amount of force, but I won’t be able to function check until tomorrow. More to come.
Sent from my iPhone using Tapatalk -
Yeah I've moved on. My Alfa is for sale on consignment at my local shop. The Alfa just didn't take off like it was supposed to in the competition aftermarket field.
...and my Shadow 2 does everything just a little better.
Still have my Alpha, but I haven’t let go of the Tanfo’s yet . I like the way it shoots and looks, but I’m definitely not as comfortable with it yet.
Sent from my iPhone using Tapatalk -
FYI, it looks like the Rex magazines take the same basepads as the CZ shadow and Sig.
https://cesar-shop.com/product/base-pad-alu-with-plate-y1-cz-shadow-rex-sig-sauer-1
Sent from my iPhone using Tapatalk -
Results ?
Don’t have any hard data. It is smoother. I dropped the grey spring in and polished the trigger bar, hammer, hammer strut and anything I thought had contact. I was surprised to sear wear marks on some of the internals where they had contacted other parts. It didn’t eliminate the stacking entirely, but it’s a lot less noticeable. I’d have hesitation shooting it DA at 15-20yards. From what I can see, the springs are the same as a 226, I’m tempted to order the $20 Grey guns spring kit to try out.
Sent from my iPhone using Tapatalk -
Your pictures also works good as an exploded view. Why the full tear down? Did you mod something?
I took it apart to do some polishing work to see if I could smooth out the DA stacking any.
It’s pretty simple to break down and put back together. Couple tips I can give real quick if you are considering it.
The only tricky thing was getting the sear spring and sear back into place. A Q-tip slave pin worked pretty well.
Also, when putting the safeties back on, do the left one first and press the detent down from the top frame hole and then do the right side.
Sent from my iPhone using Tapatalk -
If you are looking to fully disassembly your Alpha, here is a video to get you about 85% of the way there. It appears to be very similar to the Sig P226 X5 competition internally except it is a DA/SA instead of SAO.
Time to get mine back together.
Sent from my iPhone using Tapatalk -
I just purchased an arex alpha and I was not happy today I shot 7 mags through it today with blazer brass 115g ammo and I had a failure to feed on a spent casing on every magazine could you maybe give me some advice on what's going on is it the gun having a manufacture malfunction or is it the cheap quality of beazer brass and low end 115g ammo? Love the way it shoots but cannot have it jamming on me
It could be something going on with the ammo. I’ve only had one issue, and it was a failure to feed but it was a round that didn’t go through the crimp die on my reloader. I would say try a box of brass case rounds and see if that changes anything and then go from there.
Sent from my iPhone using Tapatalk -
That’s damn tiny for a grip screw. But then, I’m used to CZs and Tanfos which annoyingly rely on one screw per grip panel.
They’re out now. Made a notch with a dremel and replaced them. Can confirm, they take Sig 226 grip screws.
Sent from my iPhone using Tapatalk -
What kind of fastener does this gun use? Is it something you could likely take out with a heat gun and then the use of an impact driver.
It’s a T10 Torx. The screws look to be the same as what comes on a 226.
Sent from my iPhone using Tapatalk -
They aren’t kidding when they say these grip screws are loctited from the factory. Even with a heat gun, I was only able to get one off and strip the other 3.
Sent from my iPhone using Tapatalk -
Had anyone added base pads and checked the production box with them?
If you found some that work, what kind are you going with.
Sent from my iPhone using Tapatalk -
Does anyone know if these take any of the normal Sig P226 internals?
Sent from my iPhone using Tapatalk -
To bad I didn't know you wanted an alpha I have a Brand New one : I haven't even fired a full mag thru : I love the gun But shouldn't have bought it : I'm in security and the Alpha is at the very least a beautifully made range toy : To answer your question No the parts in the alpha aren't quite the same. There's no Firing Pin block . Changing the Hammer strut spring is child's play. The Rex Zero 1 was not for the average guy who has no clue of how to take a weapon apart. You can polish the Strut and Trigger bar : Should I decide to keep the Alpha that's what I will do. The only other thing would be the Straight Trigger when they are available. IMO I'm not sure Straight Triggers benefit that much. I have a Sig 320 that I purchased a Grayguns completion Trigger kit for. They have been Out of the version with a straight Trigger for ages . So I purchased the Curved Trigger one to get the 3.75 Trigger pull. Afterward I got my hands on the straight Trigger : There was no difference performance speaking. For competition I can see them For Security or HD IMO not needed. Maybe not even wise : JMPO
I’ve been thinking about trying something different from my stock 2, and got this on a whim. I may turn around and sell it but wanted to at least get one in my hands to mess with.
I thought all of the US ones had a firing pin block?
Sent from my iPhone using Tapatalk
Walther PPQ Q5 ???
in Walther
Posted
What kind of guiderod did you go with?