SpaceMan
-
Posts
99 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by SpaceMan
-
-
This may sound dumb but have you adjusted elevation and windage when you are holding it where it feels natural. You should be able to dial the dot close to center with adjustments.
Elevation and Windage Adjustment
There are separate adjustment screws for
elevation and windage. The elevation adjustment
screw is located on the top of the sight, and the
windage screw is located on the right side. The
windage adjustment mechanism has limit stops at both ends. Screwing
either adjustment into a stop will lock motion of the other adjustment.
Zeroing the Point-of-Impact
Adjust the point-of-impact by using a small slot screwdriver or coin. The
direction of the shift of the point-of-impact is indicated on the elevation
and windage adjustment screws. One tick mark on either adjustment
screw corresponds to 1 minute of angle (MOA), or approximately 1 inch
at 100 yards. For other distances, this value is proportional, for example:
.5 inch at 50 yards or 0.1 inch at 10 yards.
-
I guess the difference in shooting a limited gun or an open gun in 3 gun is that division do you plan on/ what division do you shoot in 3 gun. You might also find a better answer in a 3 gun specific forum.
-
While I love the look of gold barrels it got me looking around to see what other kind of Tin coatings they offer.
Aluminium Titanium Nitride (AlTiN)
- Color: Black
- Nano-hardness: 34
- Thickness [um]: 1-4
- Friction-(fretting): 0.70
- Maximum usage temperature: 900
-
Applications & Characteristics: Universal for drilling, milling, hobbing, dry machining, coating for cutting with carbide in the 90’s, with higher Al content and heat resistance
- CUTTING: Milling, hobbing, high performance machining, also dry
I have seen a storm lake barrel coated in this and its black, don't have any experience with it other than reading about it on google.
-
I have shot a couple all steel matches this year and my first 3 gun match. I started off with an IC at the steel match and it wasn't enough choke to knock down everything and that made for a rough day. I switched to a modified and I ran that at another steel match and my first 3 gun match and it knocked everything over no problem. Its a small 3 gun match so no slugs are needed.
-
So I ordered an 8 MOA C-More, it gets delivered tomorrow and I pick up my JP tonight. I just hate that its the end of the season.
-
1 minute ago, Patrick Scott said:
Perfect thank you! I think dummy me saw the description and associated glock 41 as the gun and not the total capacity of the magazine.
-
So everyone running the TF +10 Basepads, I look at TF's website and all I can find is the +12 Delrin basepads. Is this what I want for my 33round magazine, and is there anything else needed for my "big stick"?
-
C-More guys, are you using the polymer or did you buy the aluminum?
-
2 hours ago, BenBreeg said:
The show has been going down hill since last year. The whole premise was a zombie show with very strong character focus. Now it it manipulative porn.
But the thing is much more than just walking about and kill zombies. The biggest struggle is dealing with each other. Also whose to say that the walking dead is actually referring to the zombies. You forget that everyone is already infected with whatever is causing this, in reality everyone that is a survivor is technically the walking dead.
-
14 hours ago, b18prl said:
I found one on Gunbroker under Wholesale Hunters
Sent from my iPhone using TapatalkHA that's where I ordered mine from too, Mine will be here Monday.
-
Im new as well and was wondering the same thing. Seeing as they are glock magazines im thinking im just going to use some spare magazine holders I have left from when I shot a glock.
-
3 minutes ago, Sarge said:
Bob?
Judging from the RHT logo on the drop, im pretty sure its a Red Hill Tactical Holster- IE. @kingman on here
-
I think Bob builds them so they are close to the 2" maximum that is allowed.
"This drop allows you to adjust the cant and ride height of the holster to fit your own needs. Additionally it spaces the holster out almost the USPSA maximum of 2"."
-
A quick google search brought up results from hkpros.com which is a HK forum, looks like quite a few people had nothing but good things to say about Williams Trigger Specialties.
Actually google brought up a bunch of websites that have nothing but good things to say about WTS
-
On 10/23/2016 at 8:57 PM, Edge40 said:
I've got my money on Glenn with Abraham a close second.
Now if you guessed both you woulda been right!
-
I love everything about the MPX but I ordered a JP. Having a few glocks and tons of magazines it made most sense.
-
So instead of bumping that thread lets make another...
-
I believe you already asked this
-
Just now, ksorrell said:
C-More Railway 2moa on a JP GMR13
Exactly what I was thinking since I ordered a JP. Was thinking about the 8 MOA dot though.
-
Finally bout a PCC now I have to decide on an optic.
My 2 main picks right now are either the Holosun 503C or a C-More. I love the looks of the Trijicon MRO, but don't have trijicon money after buying the PCC.
-
1 hour ago, Sarge said:
You ain't seen nothing! The biggest bump I recall was 6+ years if I recall.
Actually I think the other week I saw a 10 year bump if I recall correctly. Gotta love users making a run to get post count up to post in classifieds.
-
On 10/17/2016 at 7:10 PM, CraigEcash86 said:
Can you say butt hurt!
Holy thread bump
-
3 hours ago, Chip3 said:
I just built a GMR-13 in their rifle builder and it gives you then option of their standard trigger or the Armageddon trigger. That leads me to believe that it should be compatible.
-
I could be wrong but I think he was using a Hogue holster for his M&P Core
Red Dot
in Revolver Forum
Posted
That what I was thinking next, something wrong with the mount or too high