Jmo2011
-
Posts
184 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Jmo2011
-
-
Slide glide lite on most. If it’s really tight Wilson combat grease.
-
There is usually an all classifier match at central Ozarks practical shooters range the first Sunday in September. It’s near rolla mo so probly a couple hours from St. Louis.
-
Wow, you never know how little time you have until it’s too late. One of the nicest guys I’ve met in the sport.
-
If you’re going to shoot hv ammo, consider changing the recoil spring to a heavier poundage.
-
You might want to consider the henning option also.
-
Given the fact your hands are so large I’d consider having a plastic grip built up to increase the overall size. I had one done with the carbide stuff and it provided great grip, but I had it made a little too large. Wasn’t terribly expensive to experiment with.
-
I choose to use a .40 green rod with the sharpie treatment. I made some black fiber out of broom bristle to try black sights without buying a new front sight but found dim fiber was better for me. It was an easy enough experiment though.
-
6 stages and 1 classifier typically.
-
I’ve been using an LS-P in production for about 9 months now. Really like the balance of the gun. It’s proven ultra reliable. I had to replace a trigger return spring but that’s been the only issue.
-
I've been trying to decide between hard chrome and black nitride on my LS-P and I think you just answered my question. Thanks for the pics.
-
Another option for cz platform is to use the thick trigger to add a bit of reach.
-
I've been using a large plate on my 1050. Occasionally I will get an upside down case but it's not frequent enough for me to bother with ordering another plate.
-
If someone local to you has a 650, see if you can go operate it for a little while. Maybe it will make your decision s bit easier. Both machines are good but each run differently.
-
I don't know about amsoil grease in particular but my cz runs just fine with slide glide lite. I'll probably go to standard as temperatures warm up.
-
Yes what Maximus said. Block the pouch against something immovable and pull or push the belt through, it'll be easier than you think.
-
Jeff Cockrum @ c-rums did mine. It's very good now.
-
I've used several different powders in 9mm. Right now I'm using
Prima SV with 115 grain fmj. Seems very consistent and good cleanliness. N320 is certainly a great option as well. With heavier bullets I choose to avoid ultra fast powders YMMV.
-
Personally I would avoid n310 in that loading application. It's going to be such a small charge it could be inconsistent and burn at low pressure and be dirty. Also n310 is fast enough that pressure spikes will happen quickly depending on oal and crimp choices. Hazmat fees are nothing compared to injury or equipment failure in my opinion.
-
There's no emotion necessary. Only effort to achieve the goal. Do you really want it?
-
Furrly-I'm using 180 gr fmj from Precision Delta
-
Just to confirm , yes Brandon recommended N310 to me several years back. Loaded under a 180 fmj @ 1.20 it's a great shooting load.
-
Welcome from a fellow Missourian. If your coming down for the Mo Fall Classic I'll see you there. What division you shooting?
-
Hard to beat a Dillon electronic for consistency in my experiences.
-
Or you could explore other base mounting options also.
Auto or Manual
in Dillon Precision Reloading Equipment
Posted
I’d suggest evaluating how many rounds you need to load per week versus how much time you have available and purchase accordingly.