JasonRBenjamin

+2

Pic? Price?

What about the Black ICE Holster from Bladetech?

I will have to think about shooting SSP, I do love my Power Pistol Mag well....

Have a XDM 9mm 4.5 with the drop in kit an awsome upgrade at 4lb. and a XDM 9mm 5.25 with the ultimate, and polished striker. Also 4lbs but it is so butter smooth.

I found Bullseye to run to dirty for my tastes. N320

praetorian97 > Thank you for the idea, but Please make sure to read all the prior post as your questions have been answered each time in prior postings. I will just keep my mouth shut next time big guy. Im posting from a phone most times and believe it or not I do look up briefly. praetorian97> Don't get me wrong, the input is appreciated and I mean you no offense.

I think we have a winner, thank you both Nealio & kneelingatlas There was no discernable mark with the stock hammer spring, but now with the 18lb hammer spring it is leaving a mark on the firing pin. Where the Firing Safety Block is not disengaging. Sorry for the poor Picture.

praetorian97 > Thank you for the idea, but Please make sure to read all the prior post as your questions have been answered each time in prior postings.

>>> kneelingatlas is that a stock large frame firing pin? not a Henning or EGW? Since mine is 2.586in, where do I buy a replacement firing pin? EAA? Does anyone have a spare? or EGW? Where can a EGW firing pin be purchased from?

Is there anything else that I should be measuring? Ammo is store bought.

New Wolf Hammer Spring 18lbs, Recoil Spring 7lbs which includes a Firing pin spring. ~30% of Pmc & Fed Fire, 0% of Win White Box. Remove the Firing Pin Block no issues...... Thoughts????

Polished up the firing pin and the Block this afternoon. Cleaned the firing pin channel, and for good measure I ordered a 18lb firing pin spring. Does anyone have a wire diameter on the stock 16 spring? or any of the lighter ones?

Grips are from Henning as of June 2013. New they were $150 + $10 for the screws. They very are progresive off of the leading edge. 3mm at the front lip where they drop into the frame cut outs and 4mm in the middle. It makes the gun feel simular to a 2011 frame....

I recently picked up a EAA Witness Match in 9MM with a henning trigger & grips off of Gun Broker. I am getting Failure to fire. The strikes on the Primers are so light that I had not had a round go off yet. Brought it homes and disassembled it. Nothing looks out of place with the firing pin. The Firing pin measures 2.586in long. The previous owner believe it is still the stock hammer spring and has 3k rounds through it. Never had any problem shooting his reloads using CCI primers. Thoughts?

I have a Unique set of Henning Grips..... That I would be willing to let go....

I recieved a email from him a few days ago. He takes about a week to respond to emails right now.

I will clean out the detent. Am I allowed to ride the safety like on a 1911? If so does anyone have a larger size safety lever avaliable that fits the match? That might make it feel better to me....

Just got a hold of a Match. The Safety clicks when put on not so much when taken off. Not as positive engagement as all the other guns that I own.

Since it would not be legal in either SSP or Production divisions. Thank you for the offer though.

Ok, I have been reading the older posts about some of this. USPSA = No go as it is not on the list. IDPA SSP = Won't make weight. If I want to shoot Prod USPSA, buy a Stock 2 9mm is the short answer from what I have been reading.

Can a EAA Match SA be converted to DA? (Production Division / SSP) Besides the interupter do you need a DA trigger? Where would you get these parts from? EAA?