-
Posts
1 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Bouboy02
-
-
Here’s a picture of the Alien from Shot, in the CO setup with a slide mounted optic.
Sent from my iPhone using Tapatalk Pro -
9mm 1911 with 10 round mags. Not the best choice for Production but possible.
Sent from my iPad using Tapatalk
1911s are illegal in Production.
Sent from my iPhone using Tapatalk -
Welcome from Yorkville!
Sent from my iPhone using Tapatalk -
I spoke to someone at sig a few days ago and asked about the X5. He said it will probably be late spring or early summer when they start shipping them.
Sent from my iPhone using Tapatalk -
If you have any left for a stock 2 that you want to get rid of let me know!
Sent from my iPhone using Tapatalk -
In practice I can probably average around a .80-.90. with my production gear.
Sent from my iPhone using Tapatalk -
The problem isn't pulling the trigger in dryfire, its a patience issue trying to rush to beat the timer and firing a shot without an acceptable sight picture. I would try dryfiring for a week or so not using a timer, keep doing the same drills you have been doing but instead of trying to rush to beat par times work on only firing acceptable shots. Make sure your not disturbing the sights at all when you work the trigger.
Sent from my iPhone using Tapatalk -
Max, send me the sketchup template you use and I can try and come up with a few.
Sent from my iPhone using Tapatalk
-
Welcome from Northern Illinois!
Sent from my iPhone using Tapatalk
-
Thanks!!
Sent from my iPhone using Tapatalk
-
Hey guys I searched and couldn't find anything. The front strap checkering on my stock 2 is extremely dull and might as well not even be there. I was wanting to sharpen the checkering up so I wouldn't have to use grip tape. What kind of file would Be best to do this? Also are there any tricks to doing it so it doesn't look terrible.
-Mike
Sent from my iPhone using Tapatalk
-
Did you pull the codes on it or run a balance test?
Sent from my iPhone using Tapatalk
-
Welcome from Yorkville! Your going to be hooked once you get to your first match! Tri-County gun club in Polo is having a USPSA match this Sunday if your interested.
Sent from my iPhone using Tapatalk
-
They are, hopefully this link works.Are the stages posted?
http://media.wix.com/ugd/b45f7b_08d523b8b7be46b7a6a4c2ea80a9f136.pdf
-
I can't today, I've got to run a couple people to the airport before the match. If you could meet me somewhere along my route though for other Schultz matches your welcome to ride with.anyone going to the NISA match on sunday from center city chicago that I could ride with, I'll buy the gas.
Sent from my iPhone using Tapatalk
-
Do it, you won't regret it! I upgraded from a 650 to a 1050 with a Mark 7 last November and it was well worth it. Before I had the Mark 7 I was always scrambling to load ammo the night before a match or before a practice session. With the Mark 7 I can run it for an hour and load all the ammo I'll need for practice and matches for a week.
Since you'll be upgrading to a completely new press I would probably suggest running the 1050 without the auto drive for a week or two so you can learn on it and get the feel for it before you put it on the Mark 7.
Sent from my iPhone using Tapatalk
-
Is that your percentage on USPSA or classfiercalc? I shot this yesterday in production with a hit factor of 10.7239 classifiercalc shows it as 100% but azshooters has it as a 92%
Sent from my iPhone using Tapatalk
-
This data is for titegroup. OP has a bunch of titewad which is a quite a bit hotter than titegroup. I personally haven't used titewad but just wanted to make sure the OP didn't read this thinking it was titewad load data.Load data is a report, not a recipe. You determine your OAL with a push, plunk, and/or spin test. OAL used in the data is irrelevant. It's your pistol, not their test fixture. And in this case, not only is it not the same bullet -- it's plated vs jacketed, and it's not even the same profile. Push, plunk, spin. Find your OAL.
With the Precision Delta 124gr JHP and Titegroup, you will probably see 130PF somewhere around 3.9 grains IF your OAL is 1.09. I suspect you can load that bullet out to 1.13/1.14 or more in your Glock, so you probably won't see 130PF until somewhere in the neighborhood of 4.1/4.2gr. Please start low and work up.
Sent from my iPhone using Tapatalk
-
I also shot the match today. Tri counties match is usually pretty small but its a good group of guys and they usually have real fun stages. The pine tree matches and Schultz/NISA get a lot more shooters.Shot the TCGC classifier today was surprised to only see 21 shooters at the match. is that normal for this area or are folks still hibernating.
Sent from my iPhone using Tapatalk
-
The clubs calendar on there site says the 20th. Might be worth sending them an email and make sure it's on the 27th.hope not - says 27th on website.
Sent from my iPhone using Tapatalk
-
I believe Tri-county is having the classifier match on The 20th not the 27th.Looks like tri-county has a classifier match on the 27th so I'll be taking my gear when I fly back on the 14th
Now I just have to figure out how I'm going to get to the match from center city chicago.
Sent from my iPhone using Tapatalk
-
PTPC has USPSA practice matches every Thursday night, starts at 6pmThanks for all the info guys, I'm going stir crazy on the weekends. now just have to wait until matches start.
Sent from my iPhone using Tapatalk
-
Welcome Scott! I think I was squaded with you on Sunday.
Sent from my iPhone using Tapatalk
-
Get a glock 34, put a good set of sights on it and shoot it!
Sent from my iPhone using Tapatalk
Glock 34 Trigger
in Glock
Posted
I have the tti kit in my gen 5 34. When I installed it, it brought the trigger pull down to about 3.5lbs. Now it has around 30k on it and breaks just under 3lbs.
Sent from my iPhone using Tapatalk Pro