Jump to content
Brian Enos's Forums... Maku mozo!

kosh79

Unclassified
  • Posts

    177
  • Joined

  • Last visited

Posts posted by kosh79

  1. Since I had a buttload of berrys 124 I had to try em out. They held up fine at around 1390ish.

    The 115 I didn't hold up at 1500+ that's required for major.

    115 and 9.6gr hs6 is still my favorite in my gun

    The power pistols loads are only adequate for 124/5 only from my gun at 173pf. The 115 with pp

    Will not make major the velocity levels off at 1430 and drop off if I go any higher. Too much pressure

    Still trying to get my hands in a lb of 3n37 or 105 to try

  2. I have been experimenting a bit with some different powders 9.6 hs6 with a 115 is my all time favorite but I have very limited amounts of it :((

    I have been trying 8.1gr of power pistol believe it or not, its not great but with a 125 I make 173 PF and the comp works decent.

    There is no hs6 wac sil anywhere to be found here

    Next I'm gonna give 105 a shot and maybe 3n37

  3. Fte you need more extractor tension. Either check out an after as stated or add a crap load more to your extractor.

    As for the stove pipes the brass is probably hitting the cmore mount. I had the same problems so I tuned my ejector to throw the brass lower. I was not getting stove pipes but it was still hitting the mount so I went with a 90 degree cmore mount. No hiccups anymore.

    I know the steel master is designed for lower loads than major but still the recoil needs to operate the gun which means light recoil and main springs so I can see the ftf happening. Maybe try an extended firing pin to remedy that

  4. Since I'm new to open and compd guns I did try some factory 9 in my trubor for s&g's and reduce rounds for sighting in. I found 2 distinct problems with 9minor in a gun designed to fire major

    The factory ammo constantly jammed/ stove piped and the gas wasn't even close to enough to keep the gun flat it jumped and had alot of muzzle flip

    I'd imagine you are going to have to reduce spring weights substantially between recoil and mainspring just to get the gun to operate properly

    And probably reduce the barrel weight and use a barrel without a comp

  5. Thanks Dave, you took to open well. I thought about shooting limited for the state match but eh open is just too fun.

    Load data is tricky. I shot 2 different loads on Saturday to get a feel for things

    8.1gr power pistol 125gr at around 1380

    9.5gr HS6 115 at 1497

    The pistol runs flatter in the 171-174 pf range

    I also had a few stove pipes practicing on Sunday so I went and got a horizontal mount I got to sight in today. Was tired of filing on my ejector to tune it up.

  6. So today I shot open for the first time man what a great time!

    Learned that its not as easy as one would think. Once I got the hang of it a bit started moving faster and shooting alot better just needed that awakening. After seeing the vids I definately need to carry higher, but other than that I'd like some outside advice if possible.

    http://www.youtube.com/watch?v=rkrdSiTrFX0&feature=youtu.be

    http://www.youtube.com/watch?v=Afxd_XO956s&feature=youtu.be

×
×
  • Create New...