-
Posts
148 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by dshooter3
-
-
Yes I meant POI. I have looked at the A.R.M.S mount but I don't know which one will let my MBUS be visible in the sight
-
I am looking for a c-more mount that i can switch between 2 different uppers(22 and 223) so i contacted a big name scope mount manufacture. I told them that i had a c-more slide ride and i would like one of their mounts because they have the less POA when removing. This is the response i got.
Dale,
I hadn't forgotten you, but I had to eyeball and measure quite a few mounts.
We don't have anything that even comes close to matching those measurements.
Honestly for putting a dot on multiple rifles, I would look at getting a
mini red dot like a Burris in our Iron Dot, or a Aimpoint Micro T-1. Making
a C-More meant for Glocks try and fit a rifle's not going to be easy.
Thanks,
I had to laugh at this.
What I am looking for is a mount that I can shim for hight and can switch between AR flattops and have little POA shift. If know of one please let me know. Thanks
-
Has anyone used the expanding (AB type or otherwise) for making a custom equipment case?
This is not gun related but for work equipment.
The case doesn't have to be super-great - but it does need to be light. So that being said, I'm thinking about buying one of the thinner plastic cases and making my own padding.
Thanks in advance!
So i am thinking a layer of plastic add non-expanding foam layer of plastic then felt. Add gun, plastic, felt, more foam, plastic and close case. it might work
-
I am starting a steel match in Port Saint Joe Florida next month, if the steel gets here. The match will be on the second Saturday @ 0900 EST. We will also shoot on the 5 Saturdays. We alternate between 3 different matches on that day (glock, NRA action and now steel). Here is the web sight http://gulfrifle.home.mchsi.com/
-
Just remember the remora is usually a small fraction is size compared to the shark that they hang with. So if the remora is two feet how big is it shark friend. Just something to think about.
-
Drill and tap the stuck case for a 1/4 bolt. Turn your die over. Find 10 washers that till go over a 9mm case but will sit on your die. Add (2) 1/4inch fender washers(small hole large diameter) to the stack. Thread 2 nuts onto your bolt, add the two fender washers then the rest. Screw the assembly into the case. The large washers should seat against the die and create a space past the end of the case. Run the first nut down until snug then lock it in place with the second nut. As you tighten the bolt the washers will push on the die and pull the case out.The washer seat against the die and give you something to push against as you pull the case out.
-
Your friend was right the room unit you described is unless it has a outside vent, just move the heat from one place to another within the same room. To keep cost low I would go with a ductless split system, that way you do not have to cool the condo just the room the she spends the most time in or size it the cool all rooms. The mr slim is on the high end and is a great unit but i think that there more economical units out there. If you need more info pm me.
-
Must have been a EOD troop
-
It took me 7 months. I had to get refingerprinted, the problem was that they did tell me untill I called twice. The hard part is being on hold for 45 min while at work
-
Tha air Force has me in butiful Germany for awhile and I will be off work saterday the 14. I have a rental car with a GPS. So I am looking for a ipsc match this saterday. I have limted internet acess so I can only check back onece a day. If any body has a match with-in 2-hour drive from Ramstein AFB please let me know. I was not able to bring any gear but I would love to attend a match.
-
Try adding a locking ring below the shell plate, so you have one below and one above if you have the room.
-
I had the pleasure of attending my first Shot Show. I had the greatest time just talking to the people there. There is two parts to this. The first part is talking to the people that are involved in USPSA, Jerry and Kay, Lisa Munson, Jim Lambert, BJ Norris, Debbie Ferns and so many others. The second part is talking to the company reps and when you look at there name tag you realize that there name is the same as the company, and they at lest act like they care what a A class shooter has to say about thier products. There was so many product at the shot show it was a shame that I could not take pictures. One thing that realy cought my attenction was the kit that will be relesed by dillion to improve the RF100(reastat kit). Sorry if I miss spelled any names.
-
I will there be there Friday and possible Saterday
-
Try a cockroach shoot. Useing spray adhesive coat a target and adhere 10 ketchup packets to the cardboard. At 10 yrds and a par time and go for it.
-
I found 20 243 that where fired in a 308.
-
I made one of those, my solution was adjust the the angle that holds the springs back. One other solution may to add some tension to the hinges. Pinch the frame or add some set-screws to add friction
-
Alamo I had the same problem with a STI, the problem was that the 3 fingered spring ( I an not a gunsmith) was moving in the slot in the frame. my gunsmith applied a little tweet the keep the spring form shifting no problems since. I only had the problem when I fired left hand and canted the gun. I hope this helps
-
Down in the panhandle of Florida that is just the normal 3-day weekend hike.
-
Looking to set-up a 10/22. What trigger group do you prefer. The Volquartsen or the Kid and why? What .920 barrel would you use?
-
You can also try to tint your windows with reflective tint. I just did my classroom and it made a big differance
-
Contact the NRA they are a big help with setting up ranges. They have a book on it
-
If you do use a borrowed gun make sure that it is a youth that stock fits you. A stock that does not fit will increase the felt recoil. My wife shoots a 1100 in 12 gauge and has no problem with the recoil after the stock was fitted for her.
-
EMBARRASSING MEDICAL EXAMS
1. A man comes into the ER and yells, "My wife's going to have her baby in the cab!" I grabbed my stuff, rushed out to the cab, lifted the lady's dress, and began to take off her underwear. Suddenly, I noticed that there were several cabs -- and I was in the wrong one.
2. At the beginning of my shift, I placed a stethoscope on an elderly and slightly deaf female patient's anterior chest wall. "Big breaths," I
instructed. "Yes, they used to be," replied the patient.
3. One day I had to be the bearer of bad news when I told a wife that her husband had died of a massive myocardial infarct. Not more than five minutes later, I heard her reporting to the rest of the family that he had died of a "massive interna l fart."
4. During a patient's two week follow-up appointment with his cardiologist, he informed me, his doctor, that he was having trouble with one of his medications. "Which one?" I asked. "The patch, the nurse told me to put on a new one every six hours, and now I'm running out of places to put it!" I had him quickly undress, and discovered what I hoped I wouldn't see. Yes, the man had over fifty patches on his body! Now, the instructions include removal of the old patch before applying a new one.
5. While acquainting myself with a new elderly patient, I asked, "How long have you been bedridden?" After a look of complete confusion, she answered..."Why, not for about twenty years -- when my husband was alive."
6 I was caring for a woman and asked, "So, how's your breakfast th is morning?" "It's very good, except for the Kentucky Jelly. I can't seem to get used to the taste," the patient replied. I then asked to see the
jelly, and the woman produced a foil packet labeled "KY Jelly."
7. A nurse was on duty in the emergency room when a young woman with purple hair styled into a punk rocker mohawk, sporting a variety of tattoos, and wearing strange clothing, entered. It was quickly determined that the patient had acute appendicitis, so she was scheduled for immediate surgery. When she was completely disrobed on the operating table, the staff noticed that her pubic hair had been dyed green, and above it there was a tattoo that read, "Keep off the grass." Once the surgery was completed, the surgeon wrote a short note on the patient's dressing, which said, "Sorry, had to mow the lawn."
AND FINALLY!!!............
8. As a new, young MD doing his residency in OB, I was quite embarrassed when performing female pelvic exams. To cover my embarrassment, I had unconsciously formed a habit of whistling softly. The middle-aged lady upon whom I was performing this exam suddenly burst out laughing and further embarrassing me. I looked up from my work and sheepishly said, "I'm sorry. Was I tickling you?" She replied, "No doctor, but the song you were whistling was, "I wish I was an Oscar Meyer Wiener."
-
nemo no luck so far but will keep trying
Military Orders
in Miscellaneous Topics That Do Not Fit in Any Other Forum
Posted
After 22 years in the Air Force this will be my toughest decision. Do I retire or take an another two year commitment. If I take the commitment it will add 5% to my retirement. Maybe you can help me, is SC gun friendly(matches, laws attitudes ect. What is Sumter SC like. I prefer rural vs city life. How are the IPSC clubs (I prefer 3-gun) Last what is Shaw AFB like?