asimonp79

I know that Mecgar 100% fit and the Dawson Precisiont fit

You can place STI Hammer, Sear, disconector ( 100% verified information) My friend got him Infinity hammer and ED Brown sear and disconnector- works fine Other Friend got himself kit of Brazos - of all moving parts- works fine. Another friend tried to place the Ed Brown Pins set- worked fine, he had to file down 1mm from Hammer pin and that is it ( it was too long, but the Ed brown pins come initially oversized) Same friend replaced Slide stop with the one that has long extention - worked fine. I have tried Leaf springs from STI, Brazos, ED Brown- works fine. You need "Kimber cut" front sight if you need to change it

Yesterday training https://www.youtube.com/watch?v=SbtgnLbxt3I https://www.youtube.com/watch?v=d_QA3uydh1Q https://www.youtube.com/watch?v=iD0oLB-Wtpk https://www.youtube.com/watch?v=u4rqYDyna_Q https://www.youtube.com/watch?v=hxtbyKQIsqg So on 15~16 meters I had 1 sec transitions between plates

Well Liga 4 is a wrap and I finished up 1-st with 16% off the second place. That was hard competition with some nice drills https://www.youtube.com/watch?v=5LRp-ukTVmQ https://www.youtube.com/watch?v=W32ja_j-2Rk https://www.youtube.com/watch?v=llWSdj6vi-k https://www.youtube.com/watch?v=TbmJ5EpJWos

Hello there So another regional competition here and Ishot Standard with Classic gun 9x19, 10 round mags If I look at the WINMSS I took 2-nd place with Bul 1911 pistol Some videos of the competition:

You do familiar with this? Right?

Had a competition Liga2 yesterday I won Classic devision by 9%

Yesterday training

2 day Thursday-Friday competition In tottal 86 shooters, out of them 68 in Standard devision ( all 2011 or CZ TS) There was no Classic devision ( only 2 arrived with 1911's ) and I had to shoot with 1911 minor in Standard ( against people that had 20+ mags and Majors...) Basically it was "test your skill" day. I took 3-rd place in Standard with 92.79%, loosing 0.6 points to second place ( Oh.... Gosh...) here are videos of the "gun at work"

Glad you like it. You should try the Bul as it comes in dual tone

Glad you like and glad you have the " fever"

Friday competition https://www.youtube.com/watch?v=b0I96mpERLQ https://www.youtube.com/watch?v=YZFf-hnQBzk

25 metters 3 shots with a rest

Hi I took a paper clip, flatten it, made a 90 deg corner with 4mm- and this is all what required - Video part 1 - 5:57 Because in guide rod there is little hole to insert this paper clip. When it is inserted ( and slide locked to the rear)- it blocks the recoil spring+plug+guide rod.

Todays training https://www.youtube.com/watch?v=868DiwcaivA https://www.youtube.com/watch?v=vBBW-uRYue4 https://www.youtube.com/watch?v=MZTJ6-sSgXw https://www.youtube.com/watch?v=y7K6SzLQksk

Part 3 of the review shooting Slide stop reloads

Flat trigger- lots of reasons 1) nevermind where you put the finger 2) much easier to keep the finger in position to straight pull back

I have found some store in US that sells them ( just used Google) https://getbattleready.us/product/two-tone-government/ ( I do not work for the store, niethr I live in US)

Here is a Full black version of the pistol - with no front checkering on the body. Custom straps applied ( shooters request)

attaching

And here is Bul 1911 single stack matched with Infinity trigger, Infinity hammer, Infinity sight. Regular size mag catch G10 hole grips

Hello EngineerEli I googled the web and found Bul's catalog http://www.bultransmark.com/catalog.pdf Now for 1911 you are looking at page 10 and 11

Good Morning, So today I shot the pistol. I tested reliability, reloaded 8 mags, shot 7 brands of ammo. Gun never gammed, all the primers went first shot. No failure to feed or extract. Also the fast splits were tested- I got real fast to 0.8sec splits and even 0.12sec After years of shooting other brands of pistols - I can say that the feeling of 1911 SS is new to me. The " soft recoil working slide" is absolutely new sensation. I am still getting used to the soft trigger- but still the results are not my best. + I am uploading more videos- will update it soon enough So here is a shot, Slide stop reload and another shot

Hello Guys There are different frames ( fully black or Gray - like in the video, checkering or no checkering), different callibers, you can have bushing/bull barrel. Safety ambi or Ledt side only. I asked for these specific features on the pistol ( bull barrel, Ti-Ni on barrel, G10 grips and square trigger guard- all checkered) Please notice that you can write email with questions to the factury itself ( in Israel, the support speaks fluent English and will get back to you). I wrote an emai lto the bul company: info@bultransmark.com And had all my issues solved. Regards

Hello there. After short wait and some paper work I got my hand on Bul 1911 Single stack. The pistol will be used for IPSC Clasic (MINOR) devision. The Bul company does some fine pistols, and since my hart was always for " full steel gun" and I was always trilled by the looks of the Classic 1911 I decided to get my hands on one of them. The Bul 911 Classic (competition model) is very nice built gun and I did a review on it. Part1: