[What's the Length limit for comps/muzzle breaks in 3 gun?]

Thanks!

[What's the Length limit for comps/muzzle breaks in 3 gun?]

I've heard there's a 3" limit, but just want to make sure what the rules are.  I am not in open.  I shoot tac ops or open sights.  I'm not sure if rules overlap for certain organizations so any of your knowledge would be appreciated.

 

Thanks!

[Budget shotgun for 3guns match: Mossberg 930 JM pro, Stoeger M3K Freedom, or ...?]

I'm not sure what others think, but winchester makes some nice shotguns that run great as well.  Just add an extended tube.  They run great.

[Anyone shoot at the Dallas Pistol Club-Real World Gun shoots or other shoots there?]

I'm trying to shoot some shoots there, but I have questions about it.  Do the real world gun shoots follow IDPA type rules for barrel length, PF, holsters, moon clip holders, etc?

 

Any info would be appreciated. 

[Recommend a video of 1050 setup]

I'm new to the 1050.  I'd like to see if you could recommend a good video that goes through setup and explains caliber changes and different things about the presses.  It can be multiple videos.  I figured y'all would be the best for asking about some good detailed and understandable sources.

 

Thanks.

[Anyone mount the Trujicon SRO on their revolver?]

I looked at one and liked it a lot, but does it mount to a locating rail?   Small or large rail required?  How do you like it?   I wish it had a bigger dot than a 5 MOA dot size, but it is what it is.   Any pictures?

 

Thanks.  

[Can the RL 1050 and Super 1050 Toolheads interchange?]

53 minutes ago, dillon said:

The ONLY difference between the RL1050, Super 1050 and RL1100 toolheads is the ratchet. The stroke length varies between each of these loaders, therefore the length of the ratchet on the back of the toolhead varies as well.

So then with the ratchet it wouldn’t be compatible?  Or would a super 1050 work on an rl 1050 since the ratchet would be longer because of the longer stroke? And a RL 1050 wouldn’t work on the S 1050 because it would be too short?   Or neither?

 

thanks!

[Can the RL 1050 and Super 1050 Toolheads interchange?]

Are they different or the same?  I know most things are interchangeable, but wondering about the toolheads as they are a little more complicated.  If they are different, what's the differences?  If you have any pictures of the differences I'd appreciate seeing them.  I'm new to the 1050's.

 

Thanks.

[What's your IDPA Setup?]

What is your current legal IDPA Revolver setup?  I have a 4" 625 (not sure if that is still a good one for IDPA).  It's setup for moon clips.  I'd like to know what belts everyone is using, what is legal for holding your moonclips in, how many moonclips you can carry on your belt, holster, etc etc.  

 

Thanks for your kind responses. 

[Winchester/FN SLP mag tube follower - what works?]

4 hours ago, theix said:

 

Yes, I tried full tube as my SX3 can hold which is 8 rounds. No double feed.

I'm trying to find one online so I can order and try it out.  I haven't had much luck yet finding one at my usual spots.

[Winchester/FN SLP mag tube follower - what works?]

4 hours ago, theix said:

 

Yes, I tried full tube as my SX3 can hold which is 8 rounds. No double feed.

 

Interesting.  thanks.

[Winchester/FN SLP mag tube follower - what works?]

11 hours ago, theix said:

I have a factory follower of Versamax Comp Tact which looks very much like the Nordic low drag one except the color. I will try it with my Super X3 and report back.

 

Update:

Here it is. Gold one is the factory VMCT follower that I took out. Does fit and seems to function ok. Haven't tried it on the range tho.

 

Thanks!  Did you throw a few dummy rounds in and see if it cycles?  Meaning if it doesn't throw extra rounds in while feeding and jamming it up.   Thanks!

[Winchester/FN SLP mag tube follower - what works?]

I've had a briley follower pop out of it and then I read up on some and some followers actually state theirs have issues with the FN slp type shotguns as well as others they listed.  I have a winchester super x2 which is basically the same as the FN's.  Can anyone recommend one that works?  I have a nordic extended tube which I can put in 12 + 1.

 

Thanks.

[Recommend me any upgrades to a RL 1050 - non automated.]

I just got an RL 1050.  Not the super 1050.   What upgrades would you recommend?  I’m not going to automate it.    
 

Thanks!

[What’s the difference between a Dillon RL 1050 and the RL 1050 super? Compatibility?]

What is the difference between them? Also, what about compatibility? If you have one of each will parts interchange? What about moving one from large to small primer setup? Will parts work on both systems? Any input would be appreciated.

Thanks.

[What screws, etc do i need for ELS and Weber tac mag holder?]

Anyone?

[What screws, etc do i need for ELS and Weber tac mag holder?]

I’m trying to mount the fork on a Weber tactical mag pouches to an ELS Fork.   The ELS came with screws and a couple of those round backers to screw into but they have the little prongs so they won’t work.  What do you recommend?   
 

thanks!

[What mount for standard C-more on the Glock 34?]

4 hours ago, Paul49 said:

Will this work for you? The mount clamps on the rail and stabilizes itself with a long screw through the frame in place of the trigger pin. There may be other variants on the website.

 

I have their mount for the DeltaPoint Pro and found it works great. Even took it off and put back on without losing zero. 

what mount are you talking about?  I’m a little confused by your post.  Thanks for responding. 

[What mount for standard C-more on the Glock 34?]

I'm trying to find a mount for my C-more that doesn't require gunsmithing for my G34.  Let me know whats out there and if there's any Black Friday deals. 

 

Thanks.

[CZ TSO - Who makes mag extensions?]

As stated, who makes mag extensions for that mag?  I have the 9mm.

[Black Friday Gear and Accessories Deals]

Does Ben Stoegger shop have any discounts?

[Lok Grips on your TSO Picture and Info request]

3 hours ago, Hennig said:

If you want Palmswells, ensure you order Shadow 2 Palmswells and for the love of god ask for the HIGH TOP CUT.

 

What’s the high top cut?

 

ill be getting the thin roughnecks. The bogies where too aggressive a feel for me so I got the  roughnecks on my S2.  I have smaller hands so the palm wells are a no go for me. 

[TSO- Any upgrades? Which spare parts to get?]

I have one coming in.  I’ll be using it for 3 gun. 
 

Is there any upgrades any would recommend for it?  Hard to think there is but I thought I’d ask.  
 

Best place for spare mags?

 

what spare parts would you recommend to have on hand?
 

thanks! 

[Any Discount codes for Lok grips?]

I remember a code floating around before but can’t find it.  
 

thanks! 

[Lok Grips on your TSO Picture and Info request]

Thanks!