[CBC headstamped brass]

Basicly all my 9mm reloads are CBC/Magtech. Been using them for years and never a problem.

[STI Edge - Slow Action?]

+1 on getting rid of the Frog lube. Seen it too many times on both my own and others guns.

Some regular oil and they were running again.

[The best followers for 2011]

Grams for function (18rnd . 40 reloadable in 126 tube). SPS followers are very good as well.

With Bolen and SVI followers I could squeeze in 19 rnds (reloadable in some tubes) but they often flipped a round.

[Rudy Project Glasses]

they told me the frames were identical,

OK, assumed that Rydon2 frames are smaller beacause they are tighter on my head when I try them on.

[Rudy Project Glasses]

Frames and lenses have different sizes. Rydon2 lenses fits Rydon frames but are smaller "around the face".

Pic of R2 lens (left w label) and Rydon lens on Rydon frame.

[Is N320 being discontinued]

If You can find Lovex D032 then try it.

Basicly the same speed but cleaner.

[Can I install a SVI flat trigger in my STI edge?]

STI trigger bow is wider than the SVI. It will be sloppy and a corner can drop out of the rail jamming the trigger. Drop in works but far from 100%.

If You want it to be done properly the best way is to install the SVI trigger on the STI bow.

Also don't bother with Tri-Glide on a non-STI. Seen to many chewed up bows and discos.

And as said above, trigger needs to be fitted to the grip.

[Which cargo pants would you recommend?]

Another TruSpec user. Love'em.

[N310 with plated bullets for 9mm ?]

I wouldn't use 310 for 9's, too fast and could get dangerous.

I've used 320 with good results but for me 340 is the best for 9's.

[124 or 135 gr bullets]

[124 or 135 gr bullets]

In what gun?

My PPC9 eats everything while my G17 prefers heavier bullets (I suppose we're talking lead/plated). I've had great results with 135 in the Glock, both in accuracy and feel, while 125 not so great.

[.40 Major Powders]

VV320 and Lovex D032

[VV N320 for 180gr 40 cal]

+1. Can't get any better.

[Mobile 1Grease - surprised by performance should I worry?]

I've been using Castrol LMX grease for years, works great. Same for synthetic motor oils.

All the latest mint smelling tactical beard stuff is nothing but a scam.

[Looking for a 9mm 147gr load]

Thanks all!

Looks like around 3.5 is it. I'm off to the reloading bench.

[Looking for a 9mm 147gr load]

Factory barrel.

Thanks MxDad. Keep'em comming.

[Looking for a 9mm 147gr load]

I'm looking for a load with 147gr bullet and VV320 (or similar speed) in a Glock 17.

Bullets are coppered lead.

Been looking but can't find a good starting reference.

[Improving Stage Planning]

It sounds so easy... =)

[Aftec worth the $]

Running one and it works so I'm happy with it.

Would I buy one again? Probably not. A properly tuned, good quality extractor will most likely run just as good.

[new USPSA division?]

With a 10rnd maximum-law what will happen with Limited/Prod or IPSC?

What impact wíll it have on the 2014 IPSC Worldshoot in Florida?

[post your 1911/2011 pictures]

SPS Pantera .40

[1911 disconector stops slide]

If the slide hangs without pressing the trigger, check sear spring tension and that it's seated correctly.

Sometimes the MSH and spring doesn't fit together without adjustment.

If the slide hangs when You press the trigger then check that the disco clears the hammer strut.

[tips for bad weather at match]

Water proof socks (Shark skinz) is the best since sliced bread.

[Holster review]

How is DAA RM compared to Guga Ribas?

[broken aftec extractor]

I have seen it once before and heard about it a couple of times. Earlier AFTEC offered a new on warranty but now days I don't know.