[Witness Limited thumb-rest legal in Limited Division?]

Note that come 2013, the thumbrest will be legal in USPSA Limited.

Then let us hope the Mayan's were wrong so I can rock a thumbrest like nobody's business!

[Witness Limited thumb-rest legal in Limited Division?]

APPENDIX D2 — Limited Division

22 Prohibited modifications

External modifications or features such as weights or devices to

control or reduce recoil (such as but not limited to thumb rests or

components which could be used as such).

That settles that. Thanks, Sarge!

[Limited Division holster for Witness Limited?]

What holster are you using for your Witness Limited gun? I've reviewed the Blade-tech DOH and not into that style. I'd like something more "open". Thoughts?

[Witness Limited thumb-rest legal in Limited Division?]

So I just bought a Witness Limited and I'm curious if mounting thumb-rest would be illegal in USPSA Limited division?

[Spring set-up for the Witness Limited]

I just bought my first EAA/Tangfolio (Limited 40 S&W) and plan on using it as a Limited gun.

I'm curious what some spring combos you put in your Witness pistol and the logic behind the change.

[Reloading the Witness Elite Limited 40 S&W]

I'm planning on buying a set of Henning competition mags. Will these allow me to load to spec?

I'm also ordering a conversion for my 650 (from 9mm). I'm pretty excited!

As I understand, you only need to load long with older style mags. With new K40 mags you can load up to spec.

Tomorrow, Im actually gonna start loading some trial loads for my Match using small pistol primer, VV N320 powder and 180/200 gn Bayou bullets.

Just finished fished converting calibers on my 650.

[Reloading the Witness Elite Limited 40 S&W]

I looked in the reloading section and could find only one post on this. I hear you need to load them long. I also hear you should use small rifle primers?

So... 40 S&W load info for the Witness Elite Limited?

What primers are you using?

What powder?

How much powder?

OAL?

Any info you can provide would rock.

[My 16-40 Limited Customization list - Thoughts?]

Forgot to mention I am replacing the extractor. I'm thinking about using a Wilson Combat extractor. Will this work?

So I'm a day away from purchasing my first Para. I'm super amped.

Everyone I tell gives me crap and say "Buy an STI". The truth is, I don't want an STI. I want to pimp out a Para and run with and beat guys following the crowd with their STIs. I've heard a lot of talk about Para's not running but I'm set on doing this so it's on!

Below are the list of components I'm planning on swapping out on the gun. What are your thoughts? What am I missing?

• Doug Koenig 1911 HiCap Low Mass Hammer
  
• Replace trigger parts and have trigger job
  
• Remove 80's safety parts
  
• Dawson Precision 1911 HiCap Barrel Bushing Match, Stainless Steel
  
• Ed Brown 1911 HiCap Wide Ambi Thumb Safety, Stainless Steel
  
• Gun Craft Standard Serrated Steel Mag Release with Extended Button, Stainless Steel
  
• Dawson Precision Ice Magwell, Silver with Black insert, Flat Mainspring Housing
  
• Dawson extended basepads
  
• ISMI Mag Springs
  
• All new internal springs
  

[My 16-40 Limited Customization list - Thoughts?]

So I'm a day away from purchasing my first Para. I'm super amped.

Everyone I tell gives me crap and say "Buy an STI". The truth is, I don't want an STI. I want to pimp out a Para and run with and beat guys following the crowd with their STIs. I've heard a lot of talk about Para's not running but I'm set on doing this so it's on!

Below are the list of components I'm planning on swapping out on the gun. What are your thoughts? What am I missing?

• Doug Koenig 1911 HiCap Low Mass Hammer
  
• Replace trigger parts and have trigger job
  
• Remove 80's safety parts
  
• Dawson Precision 1911 HiCap Barrel Bushing Match, Stainless Steel
  
• Ed Brown 1911 HiCap Wide Ambi Thumb Safety, Stainless Steel
  
• Gun Craft Standard Serrated Steel Mag Release with Extended Button, Stainless Steel
  
• Dawson Precision Ice Magwell, Silver with Black insert, Flat Mainspring Housing
  
• Dawson extended basepads
  
• ISMI Mag Springs
  
• All new internal springs
  

[Race to B Class]

C Class Production shooter wanting to get to A by the end of the year. B is the first step... come on B!

I shoot in the SC Sectional the end of this month and in the Area 6 Championship next month. I really want to do well. Practicing all I can. We'll see how it goes!

• A70035
  
• PRODUCTION
  
• Class: C
  
• Pct: 53.69
  

[Lee dies w Dillon press]

I reload 9mm on my 650. I have to say, I have quite a mix of dies on it! Station 1 I use a Redding carbide decapper/re-sizer, on station 4 I use a Lee seating die, and on stage 5 I use a Hornday taper crimp die. It's a long story but this combo personally works best for me.

[Taper Crimp Die...]

When I reload lead, I use a Hornday taper crimp on my 9mm. Great die!

[Taper or roll crimp for 223 in an AR?]

I'm about to start reloading 223, in bulk, for my AR-15 and was curious as to whether I should roll crimp or taper crimp my rounds. I am using 55gr Hornay FMJBT with cannelure in a Dillon 550B.

Thoughts?

[Stippling Info Needed]

Here is my recent stippling run on my G34 Production rig.

[Daylight bright illuminated scopes]

I just finished my first 3 Gun AR-15 and researched, and held/looked through, a TON of optics. I had a budget of $1,000 and ended up spending $500 on a Vortex PST 1-4. It had everything I wanted in an optic for 3 Gun. I wanted to spend more $, really I did, but sometimes you luck out.

[SSP un-captured guide rod]

Does my jager guide rod have to be "captured" in my G34 SSP gun? Basically, is it legal to run with it un-captured? I use an 11-pound ISMI spring on the un-captured Jager polymer guide rod.

[After Market Barrels]

I'm buying the Glock 34 for USPSA production and I'm wondering if the barrel is fully supported. I'm not looking to run lead through the barrel but will be using Berry's plated ammo. I'm probably going to average 2500 rounds per moth through the gun. Do I need another barrel for plated bullets? Will the brass bulge with the stock Glock 34 barrel?