[Best Brand of Moonclip Checker?]

1 minute ago, alecmc said:

 

BMT doesn't make a moonclip checker.

LOL.  My bad.  I thought he was looking for a moonclip loader.  I didn't read carefully enough. 

[Best Brand of Moonclip Checker?]

removed

[PCC Rack on Cart Legal]

16 hours ago, robertg5322 said:

 

Got one set up with the Magpul MIAD grip and the Strike Industries Grip Fin, the other with a Resurgent Arms grip. The safety lever leave a bit to be desired, the detent is mushy and it feels loose, and required quite a bit of fitting (the flat was to high, had to file it down quite a bit), but it works for now. Next year I'll be leaving the state, and that stuff will be a bad memory.

You should contact Will Katz at Resurgent.  I got a bad safety, and he replaced it with one that worked perfectly.  I have 5 ARs set up with his grips and safeties.  

[Ruger PCC 3D printed accessories]

Does the shroud attach to the rail on the handguard?  My friend runs a Ruger PC, and he would love this!  Will you be selling them?

[Recommendations for a good PCC charging Handle?]

On 12/10/2018 at 4:05 AM, Supertrunk said:

I went with the Strike Industries one on mine, and like it a lot. If you want more surface, they make add-on extensions.

+1

I also run the  Strike Industries charging handle with the add-ons, and I love it!

[PCC “Minimum” Capacity for USPSA]

I run a 31 rd glock mag with an MBX "Mini" attached.  I usually load only 40 rounds in it, and it is perfect for nearly every USPSA stage.  I carry 31 rounders with MBX +6 pads for my backups.  For classifiers, I like the Magpul 21 round mags.  They  are short enough to reload easily, and they are big enough to get a good "beer can" grip on them.

my $.02

[PCC Rack on Cart Legal]

On 12/9/2016 at 6:51 PM, robertg5322 said:

And don't you just love the California compliant grip wrap?

If you want to make your CA compliant, you need to get the resurgent arms grip, extended 45 degree safety, and the ergonomic end plate to protect your hand from the castle nut.  I put one on all my ARs including my 3-gun  and my PCC .  I think it works really well.  As close as a pistol grip as you can get.  https://resurgentarms.com

[Time to upgrade my stock, suggestions?]

https://phase5wsi.com/rifle-mini-stock-assembly-rmsa.html

This is what I put on my PCC gun in red of course.  lol

[Time to upgrade my stock, suggestions?]

On 1/31/2019 at 6:31 AM, Startingover said:

 any more suggestions?

https://www.strikeindustries.com/shop/products/ar/ar-stock/viper-pit-ar-are-t7.html

[Extra shots on a stop plate in ICORE]

On 8/7/2017 at 6:34 PM, harleytech said:

So what happens if a shooter missed a plate but hit the stop plate afterwards? Did the string stop when the stop plate was hit or can he take a makeup shot prior to "If clear, close cylinder, holster"? That's why the wording of Chapter 2 that covers the stage being explained by a complete written stage description is so important to these stages. I hope this explains my rationale more completely.

I would not roll back the clock for multiple stop plate hits.  It is the shooters responsibility to know when he should stop shooting.  The total time is from the buzzer to the last shot fired.  Rule 6.5 says "Scoring is done on a "total time" basis. The accumulated time of all runs, plus target hits, plus penalties equals total time. That will be the score."

In your scenario, If the shooter missed a plate, then shot the stop plate, then took a make-up shot at the missed steel, I would score it as follows: total time would include the last make-up shot, and the shooter would be score a miss on the plate because it was shot after the stop plate.  Any shots after the stop plate do not count for score, but they would count for time.  Maybe that's harsh, but that is how I would score it.  

[Are we really Revolver “Enthusiasts?”]

On 10/8/2018 at 4:07 PM, MikeBurgess said:

welcome to the dark side

I would argue that the buying the 929 and putting a dot on it would be joining the dark side.  LOL

[which comp for 9mm PCC ?]

8 minutes ago, MemphisMechanic said:

 

Uhh. Which comp?

Sorry.  I edited my post.    It's the MBX PCC comp

[which comp for 9mm PCC ?]

On 8/28/2018 at 10:10 AM, mahamoti said:

On the subject of comps... Taccom released their new CF sleeved barrel, but it's 13.5".  That's going to need a comp at least 3" long to pin and make it legal.  It's also 1/2x28 threaded instead of 1/2x36.  Anyone have an idea of what comps are long enough to work, with that threading available?

I had my 16" barrel cut down to 13.25" and added the  MBX PCC comp.  It's 3" long, it's , it looks good, and it works. https://mbxextreme.com/index.php?page=PCC_Comp_Mount_CTR

 

[Which Sear Housing Block?]

I have an M&P 9 with a "thumb safety ready" frame and sear housing block that will not accept an APEX RAM.  Which sear housing block do I need to order to be able to install a RAM?

I bought a S&W sear housing block from midwayUSAthat works with the RAM, but it does NOTt work in my frame.  It only works on the ILS frames, not with the thumb safety ready frames.  Any suggestions? https://www.midwayusa.com/product/546264/smith-and-wesson-sear-housing-block-without-integral-lock-and-magazine-safety-s-and-w-m-and-p-m-and-p-compact-9mm-luger-357-sig-40-s-and-w?utm_medium=email&utm_source=service&utm_campaign=order-confirmation&utm_content=product-description-link

 

 

[anyone Try one of these in their M&P?]

On 8/13/2018 at 5:39 AM, paperchasin said:

Have the polymer version made by Costa and it works great

I like the Costa Catalyst as well, but when I tried to get another one for my second M&P, I couldn't find it anywhere for sale.  Does anyone know where can I get one?

[Razor red dot riser]

Check out the Strike Industries Rex Riser.  I put my FastFire3 on one, and I love it!  https://www.strikeindustries.com/shop/r-ex-riser.html

[CMC Trigger for AR-9 PCC?]

I sent a DM on Instagram to @cmctriggers and they replied that the PCC trigger will be available "within the next couple weeks"

[I cannot send group messages in Contacts anymore from my Mac Mini]

Does anyone know how to fix a problem in the Contacts app?  I used to be able to send group emails by typing the name of the group like ICORE 1 in the BCC line of the email, but those groups I created do not show up when I type ICORE 1 in the BCC line.  It still works on my iPhone, but not on my Mac Mini.  When I open contacts and click on the group ICORE 1, I can see all the names, but in the window on the right where it normally shows all the contact info for each contact I select, it says "no Cards"

I'm confused

Chris

[CMC Trigger for AR-9 PCC?]

Cool thanks 

24 minutes ago, laz2011 said:

Keep an eye out for CMC they are working on a trigger for PCC .One of there reps told me at the NRA Convention it should be out soon. 

 

 

[CMC Trigger for AR-9 PCC?]

I have a CMC trigger that I would like to put into my New Frontier 9mm lower.  I have a New frontier upper with a Kaw Valley Precision standard 9mm bolt and KVP match barrel.

Will the CMC trigger work on this gun?  I have heard that certain drop-in triggers don't function properly on 9mm AR PCC gun.

Thank you,

Chris

[need suggestions for mag pouches for big stick glock mags]

4 minutes ago, Aircooled6racer said:

Hello: You only need the big stick to start in the PCC. I use Glock 17 magazines with a base pad that gives me 20-24 rounds. I carry two of those on my belt but have a mag pouch to carry a third if needed. Most stages you will only need 36-41 at most for a USPSA pistol match. Thanks, Eric

Good point.  I guess I was thinking if my primary mag crapped out right at the start, I might need another big stick.  I've watched a few people have feeding issues and have to dump their big stick on the first array.

[need suggestions for mag pouches for big stick glock mags]

Full disclosure:  I havent finished building my PCC gun so I'm asking noob questions:

Has anyone tried carrying them base pad down in a pouch so you don't have to flip a really long mag around to load?  I'm planning to use a MBX mini on a glock big stick. 

Is that a good way to carry the mags?  If so, what kind of pouch would hold an MBX mini?

[Pcc stock on belt start question]

16 hours ago, ChuckS said:

Did you ask the RO to cite the rule?

 

If the WSB says buttstock touching belt, then the buttstock has to be touching the belt, not something on the belt. As for the fang thing, it looks like a good gamer answer to buttstock touching belt! In fact, I really see no reasonable way that a belt could be made to touch the main part of the stock to a belt with the fang installed. The fang also looks like a dandy device to get caught on shit as you move through a stage. Shirt pocket comes to mind also.  Prone could be interesting

Is there an official answer to whether or not the Fang is considered part of the buttstock?  I was thinking of installing one.

[Pcc stock on belt start question]

17 minutes ago, MemphisMechanic said:

 

USPSA HQ heavily encourages things like ‘stock on belt’ over port arms. For one thing a technically correct military port arms is going to have your muzzle at 180.00...

 

For another,  it seems everyone has a different picture in their head regarding what this USPSA port arms is.

 

That makes sense!  thx

[Pcc stock on belt start question]

Do the USPSA rules allow for a "port arms" start?