-
Posts
1,585 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by DyNo!
-
-
-
I've always hated wearing a velcro inner and outer belt since they wear out easily and I've wondered if using a Cobra style belt and several belt keepers over a normal belt would be rigid enough to be competitive.
The alternative is a ratcheting style belt, but if I could use a front clip on style with belt keepers (like most LE belts are designed), I'd be very comfortable with that set-up holding up.
However, I've never seen anyone do that who is serious about IPSC/USPSA (M & GM).
-
I own one of their 30 round magazines. It feels cheap like it's going to break HOWEVER....
It doesn't break and I just can't kill it!
Looks tacky too, but I think I may get a few more and just spray-paint them some opaque color.
-
This is ridiculous but I love it!
Looks good, keep it up!
-
20,000+ rounds on mine but I tear it down after every firing and if there is an o-ring that has torn, I replace it immediately.
-
I've been shooting Super for years now in IPSC Classic. It ends up handling like a REALLY reliable 9mm 1911. I'd recommend it if you're at a range where you CAN get your brass. If you've got tall grass, stick with 40.
-
On 7/23/2020 at 10:34 PM, 427Cobra said:
this aint precision benchrest, put the borescope away, clean or don't clean, its a pistol round loaded at low pressure
Amen!
-
On 10/11/2018 at 1:48 AM, RaylanGivens said:
If you look at the stage summary in the lower left hand corner of the video, Max received a Foot Fault procedural on that stage... It's highlighted in red on the screen.
I ran it in slow motion and it was close... Max might have been too fast for the RO.
It does look like an interesting way to deal with a hard left side lean though.
I dug this thread up out of the dead.
That first clip at 31 seconds is the most "gamer" stuff I've ever seen.
I'd love to practice that but I can see RO's giving you penalties because it SEEMS like it should be against the rules even if done properly - so I'm not quite sure how I feel about it.
-
With the JP, I take a fired .223 case, hammer the mouth shut, and support the JP barrel on a block of wood and beat the crud out with the brass as a chisel.
The brass doesn't harm the brake and I can scrape everything, even the radius in the brake.
-
On 4/22/2020 at 7:40 AM, Joe4d said:
eventually, but so is loading them. Eventually feed lips get out of spec, or crack, mag catch slot widens... I mean any movement or contact would wear something out.
Eventually you will end up with some tubes that arnt 100% reliable. Mark those and use them for practice.
At one time you could buy weighted plastic dummy mags. I have some for Para ordnance. I may have an STI around here somewheres. Google may find you some.Repeated since there's not a like button.
-
Very good discussion.
Been shooting IPSC minor Classic (Single Stack with a bull barrel) for several years straight now.
There's really a low threshold for failure and the only division that is even less forgiving of mistakes is revolver.
If you stop respecting your sights with a skinny gun or a round gun, you are in for a quick wake-up call.
-
On 10/25/2019 at 9:02 AM, Tango said:
I think today's shooters are better overall. This is similar to what happened to martial arts in the past decade with the proliferation of MMA and internet videos: inefficient techniques disappeared and overall skill levels increased dramatically. Better communication, cross-breeding of methods and techniques....in short better communication technology allowed shooters to learn from each other much faster than ever before.
Agreed - I wish I was just getting started today.
Lots of cheap quality equipment available too.
There was no such thing as a good competition ready 2011 for $1000 when I got started.
Same goes for PCC, I would have loved to have something like that 18 years ago.
-
Square Dust Cover in IPSC Classic
Hey there! I saw a really cool 1911 for IPSC Classic the other day (Not USPSA Single Stack) and I'd like to know:
- Is a square dust cover that’s under the max length legal in Classic?
- Who makes a one piece frame that's like this? (Other than Metrillio)
- What's the longest lasting barrel brand for 1911's these days? (For rounds fired before accuracy is lost)
-
They won't do it since it's an ITAR violation, I think you should proceed carefully.
-
They sell those down in the Philippines for IPSC where a bull barrel is legal (Classic Division).
I've got a 1911 in 38 Super that I shoot in minor. Can't tell the difference between that and my 9mm 2011 at home while shooting - aside from having to reload it twice as much!
-
I was in the first 3GN pro series - was a bunch of fun. Finished high enough not to have to re-qualify for the next series, but I opted not to and left to go live overseas. It looks like 3-Gun almost died while I was gone! (And PCC became a big thing)
Many of the folks I used to shoot with are no longer active - and I suppose it's time to look at things in hindsight since I've been a USPSA member for almost 20 years.
If I come back to the states, I'll probably just shoot PCC. (Heck, I'm tempted to do it in Asia under IPSC!)
I really hated shotgun - hated it. I'd always ditch it as soon as possible. If it were up to me, I wouldn't even bring it to the match. To "ban" that from this discussion means the OP already knows.
With the introduction of PCC to USPSA/IPSC, I think it's too late to get 3-Gun back to where it once was. It's better to consolidate under one umbrella and USPSA has the infrastructure to do that.
Burning through a pistol stage with a 5.56 rifle was the time I had the most fun, and if now it's an option to do that at every pistol match, I won't be making it to nearly as many 3-Gun matches.
I'm tempted to put my 3-Gun stuff up for sale but it looks like I waited a few too many years to do that.
-
On 6/24/2019 at 6:23 AM, Service Desk said:
Yep, prices do vary by location. I have seen used RL1050's go for $2k in Australia and even more in New Zealand. Just evidence of the law of demand and supply I guess.
Exactly, I'd like to get my 1050 to the Philippines, but the customs police would steal it.
It's better to pay double price here than to make a donation.
-
Yup, I'm that guy. It sold, hasn't been used in 4-5 years. Never had a problem with it.
The dies, I've been using them waaay longer than I've owned that press. Pretty hard to wear out carbide dies with brass even though the outside looks ugly from getting wrenched on and off.
I don't shoot nearly as much as I used to. Might pick up a Dillon 550 locally to use in the Philippines.
18 hours ago, 78Staff said:A 1050 (RL I think) just popped up on Arfcom for 1599... it's close enough to go pick up, but the press is wrapped so you can't really tell the condition. but if the dies/accessories are any indicator, it's in pretty beat shape :(. To much for me anyway, still looking for that 1K one :).
-
How has everyone else been from this thread for the last 10 years? Got my notification for a reunion this morning.
-
Super always runs better. I shoot 38 Super in IPSC Classic (Single Stack) minor in the Philippines. I'd never consider it if there wasn't a caddy to pick up 97% of the brass.
-
On 8/19/2017 at 2:29 PM, matteekay said:
Sorry to dig up an old post, but any long-term reliability thoughts on the Mec-Gars? I'd be using them in the same gun so I'm pretty intrugued.
Same here. I own one and I'm deciding whether to get more or not. It works just fine but less than 500 rounds through it.
-
On 9/27/2018 at 8:17 PM, Blaster said:
trojan only sells complete rifles,nortic is working on lower
Is Nordic actually working on a lower? They announced it a few years ago, haven't heard anything since that SHOT announcement.
-
I don't own a Glock and don't want to.
Is there a way for me to get a lower or a mag block that uses 2011 magazines?
It looks like this one is sold as a complete rifle only.
-
On 7/3/2018 at 5:31 PM, bmiller said:
My home made laser. I got sick of my purchased lasers losing zero and the batteries going dead. This is a very rough prototype. It looks like hell, but it works great.
Can you post more pics and details of it? I'm curious what you came up with.
Para Clark barrel CUT DOWN to Wilson Nowlin ramp?
in 1911-style Pistols
Posted
I wonder if that's possible to do... Tagged...