ClayBuster
-
Posts
150 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by ClayBuster
-
-
They told me 8 weeks, it was ready in about 5 weeks.
-
Wow nice job
-
On 6/2/2019 at 6:53 PM, ramnj said:
No. It can’t be converted to 9mm.
Oh it can be, but it'll be cheaper to buy one in 9mm
-
No issues with mine.
-
17 minutes ago, CSEMARTIN said:
ClayBuster,
Can you post a photo of the brace you made?
Best I can do for now.
-
Mine used to do that until I made a brace and bolted it to the wall, i get maybe one every few thousand now. How solid is your mount?
-
On 5/26/2019 at 7:33 PM, Trevor300wsm said:
Any idea of a ballpark price to list mine at for sale? Less than 1000 rounds fired. 2 STI mags and one MBX mag (140mm). Seems like STI’s don’t rate very highly around here. I doubt anyone is going to want to trade a .40 for a 9.
It’s a buyers market right now, horrible time to sell.
-
17 hours ago, Yixo said:
I am tempted towards the CZ P01
If you can handle the P-01 the CZ SP-01 Tactical should be fine as well.
-
It’s not mine, I was just showing the rotation of the powder measure. LOL. I didn’t catch the rod either.
-
-
1 hour ago, Joe4d said:
Did you check the machining on the slide ?
All good.
-
My RMR is back, they said it was a faulty electronics unit, they’ve seen it before. They replaced the electronics and updated the emitter support. The update must be new, the unit was made in March.
The new CZC mounting plate is installed
RMR and sealing plate is installed and running fine. -
The Dremel will work fine, work slow and check for fit.
The dust that it will produce is very hazardous to your lungs, protect yourself or wait for the RMA.
-
My RMR is on the way back, they said it was a faulty electronics unit, they’ve seen it before. They replaced the electronics and updated the emitter support. The update must be new, the unit was made in March.
The new CZC mounting plate is installed
I have the Trijicon sealing plate
RMR will be here tomorrow -
3 hours ago, regor said:
Looks like the CZ Custom Accu bushing service would work, but that's not self-serve like the 10X bushing.
Not nearly as inexpensive either.
-
All The 9mm bullets I buy are sized to .357, they just seem to work the best in my CZ’s and all the rest of my 9mm pistols.
-
6 hours ago, Dwbsig said:
I’m very curious what caused the warped plate what’s to keep the new plate from warping.
Me too, when the new plate gets here I'll have a better look at the slide. I have a class this weekend so I ordered a 507c to get me through the weekend. Almost had to use my Wilson EDC x9 for the class, that would have sucked, I hate that gun.
-
1 hour ago, mveto said:
I’d be interested in what cz custom has to say about the warped rds plate.
They are sending a new plate, and a sealing plate has been ordered. I didn’t know I needed one with a type 2. First pistol mounted optic, you live, you learn.
-
Initially, it started flickering and I though wow that battery didn't last long, so I pulled it off the plate and one of the ground ( I think it's a ground ) tabs was laying on the plate the battery fell out and the other tab was hanging. This kind of stuff usually only happens to my brother. Called Trijicon yesterday and they should have it back today and let me know what's up hopefully.
-
Anyone think this is a problem?
I'm not say this is what did it, but 5 days and maybe 1000 rounds.
-
9 minutes ago, wtturn said:
"The factory target looks good but there’s no way that was shot with this gun, 4 different shooters at 25 yards and it prints 6-8” high and looks like a shotgun pattern."
So the four other guys can't shoot either? Lol
Sent from my ONEPLUS A6003 using Tapatalk
I cant explain that
Maybe they need glasses too.
-
UPDATE
So while the gun was at CZC my brother shows up with his M&P pro with a freshly installed RMR and his wife’s stock M&P pro. I couldn’t shoot her gun for s#!t so I tried his and it was eye opening, I was literally hammering my 200 yard 24” plate with his gun and sight. After we were done loading some ammo I emailed Stuart and asked him to cut my slide while it was there, that dude was awesome he got it done and back to me in under 4 weeks.
It was delivered Thursday the 25th, looked nice and I practiced the draw and finding the dot Thursday and Friday night, Saturday I was pretty good, it took about 400 draws from the holster I pick up the dot 90-95% of the time. I filed down the front sight and blued it cause I think it looks cooler
shot a bunch Saturday. Went back in the backyard on Sunday and I couldn’t miss the targets. Holy s#!t where has this been all my life. I’ll continue to use this system and I may need a few more cut.
Oh yeah, there was nothing wrong with the gun. It was me and my 50 year old eyes.
-
4 hours ago, je85 said:
Ask him how clear the glass is and how crisp and bright the dot is.
He said it was really nice, and moved on to the aimpoint. I have zero interest in the aimpoint.
-
My friend just sent me this from the NRA show, it doesn’t look horrible.
shot a bunch Saturday. Went back in the backyard on Sunday and I couldn’t miss the targets. Holy s#!t where has this been all my life. I’ll continue to use this system and I may need a few more cut. 
New to me STI 5.0 Tactical 9mm
in Gun Springs
Posted
Not knowing what springs are installed or how many rounds they have on them I'd like to just respring the gun.
I'm guessing a 17 pound hammer spring and a 10-12 pound recoil spring? Variable power or standard? ISMI or Wolff?