philproulx

hello i'm looking to do some NRA action/Bianchi match in Alburg rod & gun club , Vermont i have a good set-up to build the match but i don't have the mover and if there's enough interest i'll build the mover plz if you are interested pm me

Hello The Alburg rod & gun club will be hosting a USPSA match on June 16th as part of a serie of fundraiser event the fundraiser goes toward developping new shooting bay we what the club to be able to host bigger match it's gonna be a 6 stage match around 150 rounds Uspsa pistol rules applies if you what more info just pm me thanks philippe proulx

July 28 2013 at alburg rod & gun club there will be a multi-gun match ( time+ penalty ) uspsa division no power factor minimum caliber rifle 223 / pistol 9mm / shotgun 12 gauge ----simple 3 huge stages 100 pistol rounds / 60 rifle / 50 shotgun birdshot / 5 slug info pm me philippe

hello i just want to know if it's ok to put the hammer angle notch to 90 degree on tanfoglio and cz guns thanks philippe

i put target at every distances for the practical i put 2 trargets at 10, 2 at 15 etc... plates i put 4 plate rack i put 2 barricade one with the 10 and 15 yard target the pthe with the 25-35 the speed load i pur 4 set of 3 target

thanks action pistolero my guess is i will build 4 mover for each distances

our ranges are builded that there is only one place you can shoot ----the legal firing line we cannot back off or go foward so the thing with the boxes backing 10-15-20-25 yards i legally cannot do it if i do so my good governement with all it's wisdom will shut down my range

no i mean we can shoot on the move but only lateral movement is allowed we cannot run downrange that why we cannot do the mover due to our brillant law maker/politician

thanks for all the info i'll start with a metallic gun first and build an open in a nearby future i have made some aggrement with my shooting federation up here to start action pistol they give me financial support and publicity my main concern is the mover there's no way with all the restriction we havein shooting imposed by our governement , that i can have the mover we cannot move past the line of fire .....i know that stupid but we are still allowed to shoot we gonna make the speed reload event 7.17 in the rule book instead i guess it's a challenging event too philippe

Hello i'm pretty new to bianchi i have checked the nra rule book and it only say 3.5 pounds for production is there a minimum for open and metallic and where can we buy a tombstone optic for open guns and shroud for 1911 thanks phil

hi i just want to know where are the closest match i can find near vermont

i had some problems with flat nose bullets it was hitting the frame/ramp really hard and got stock there i reshape the frame and put more angle on the barrel ramp itself now it feeds just like my custom 2011 i put anything into the gun and it works i run wilson 10 rounds emt i shoot one mag with 100 gr frangible 115 puff load 124 IPSC production ammo and 147 remington golden sabre it all feeds really glad with my spartan and it is superbly accurate with 115 rainer 5.0 gr longshot puff load but really accurate, i have work the ramp put ambi safety magwell and countour the grip safety it was a bit sharp on the edge lap the slide frame with compund polished the hammer face and inside the slide where the hammer slide total time spended i would say 3 hours cheers philippe

Make sure to clean the carbon out from under the gas ring. do you mean the piston or the grey coiled looking spring because i do the piston then the gas port ,,,,, thanks for the info

just checking how many rounds you putted in your 930 i think i'm still paranoid by the fact that i used a rem 1100 jam-o-matic for so long , i got the mossberg 930 roadblocker a month ago and i've shot more the 750 rounds without any problems and without even cleaning it.....now it's clean and due to the fact that the first 3-gun match is in 2 weeks i'm wondering if i have putted to many rounds down the pipe and problems will occure in a near future and when you say paranoid i just bought a 930 turkey(tactical) in case of the roadblocker(open) goes wrong so far i did reshape the follower more bevel in front i've put a tac-star 3 rounds extension (since we are limited to 5 rounds here in canada) cannot go with any of the nordic stuff since they don't ship here i've installed my arredondo speedloader chute for remington----belive me it's a 4 hours job and i've polished the lifter gate please post your round count and mods

hi i looking to develop a load for uspsa multi-gun , IPSC shotgun to drop popper with a low recoil i have a littleton shot maker that is why i still reload shotgun i have 1 1/4oz wads and 1 1/8 wads a ton of STS / nitro 27 hulls i have hodgdon clays-hs6-longshot-titegroup in powder available now i have developed a lot for plate rack-----28 gr of longshot -1/18 oz shot cci primer but it is really loud (i have the mossberg 930 roadblocker) now if someone can help me with a managed recoil load for popper slaying thanks philippe

thanks for the info that came in really handy with the mag release plunger i got down to it and i must say i,m pretty happy with it ...... it is pretty close to my old cz shadow i haven't touch the sear and hammer cause i'm not sure to do it right but the rest is good 7lbs double action with no grit feeling and 3.5 single action it's pretty long but i'll live with it 14 lbs hammer spring from wolf i first polished the trigger bar cause it was rough and the trigger bar plunger and the notch in the slide that the trigger rub on then the underside of the sear housing it's a 3 hours job to get a trigger far from what you got from the start

hy guys my tanfoglio L model just came in , the trigger is a little hard for my taste i have all the wolf springs for this model / hammer springs 13-14-15lbs can someone help me with this----post pics of the parts that need to be polished i will change the springs and polish some contact point but i'm not gonna touch the sear/hammer myself thanks philippe

can you take the bracket appart and pin for a pics just curious how you did the pins and holes on the bracket

plz spencer post new pics when the gun is complete and waht modification you've done

if you look closely at the arredondo speed loader assist it is a remington 1100 bracket and i don't thing Jerry run the 18.5 in barrel it look longer than that just check both photo at same time it looks longer on his gun i shot the road blocker and it does not shoot anything from walmart like value pact i guess not enough pressure i had to get remington sts premium 3 1/4 dram eq and 1 1/4 oz shot but it felt like shooting 2 1/2 dram with than big brake one thing that went bad ---the hammer drop when the bolt wasn't fully closed so the bolt torqued the receiver and the gun stop from working....and guess what ,not covered by mossberg warranty so the gun is a paper weight now so long for mossberg , i will end up using my jam master 1100 again this year...i will get a benelli next year

Hi just wonder if someone have info about the tec-loaders and arredondo speed loader assist that Jerry Miculek have on his mossberg 930 from that pics it look like the same arredondo bracket that i have on my 1100 but with a new hole and on hole that is not use do you guys think it will fit or can be fitted-- and does he run the 930 roadblocker or that muzzlebrake has been custom fit on a longer gun phil

hello i'm looking to make my own shotgun speed loaders( tec loader) i live in canada so i can no longer order stuff the US even the tec loader cause it is consider a gun part (must be the bracket) or if someone can tell me that some dealer is willing to send it to canada i'm buying i need inside diameter of the tube and perhaps what stuff did you take to make your own thanks phil

i just chrony my loads out of my Bar-sto Edge 4.4 gr Clays 1.200 OAL av 939 average of 10 PF 172 with a 183.5 gr LTC just a bit close to the 170 IPSC major PF 4.2 gr Clays 1.190 OAL av 935 PF 171 with a 183.5 LTC again a bit close to 170 major IPSC not USPSA 4.4 gr Clays 1.190 OAL av 952 183.5 gr LTC 175 PF --------------the HolyGrail for my lead load ....not to smoky either and pretty accurate going to try 4.5 at 1.190 just to check out the difference

hello I've been reading all the topic about CLAYS recently i just want to learn different load in different gun i don't want to learn that CLAYS is dangerous or i should try some other powders right know i'm doing some load with it and i'm pretty impressed i load 4.4 gr with a 180 TC lead (magma cast wheel weight) at 1.200 pretty soft but i could not have reading from the chrony it was too dark and i've tried 4.3 gr with plated bullet at 1.190 gave 173 pf out of my 5 in bar-sto give me all your load, OAL and PF with this powder thanks DVC phil

i would suggest the JV dynamics mount for Doctor sight jvdynamics.com