MAP
-
Posts
22 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by MAP
-
-
On 9/19/2019 at 6:33 PM, Face5535 said:
What was the average wait time? I am at about 2 weeks maybe 2 and a half.
I placed my order on 9/1 and received my Ammobot on 10/11.
-
Romeo1 Shroud
in Sig
In my view it is worth it. The Romeo 1 can damage easily.
-
On 7/3/2019 at 2:20 PM, alexcue said:
Thanks for the headsup on the motors, I still have my spare one, and I found the video on YouTube of how he swaps it. But the original motor might be starting to go. Might as well stock up. Love my Pal-Filler. So glad I got it when I did.
@Grandpoobah is the weight just pulled off of the old one?
The weight is pressed on. I payed it off easily.
Mike
-
Romeo1 Shroud
in Sig
On 2/9/2019 at 4:27 PM, terrydoc said:Hi Guys
When you fitted your R1 shrouds was there any need to adjust the dot for elevation.
You will need to re-zero once the shroud is installed.
-
My personal experience with those primers is the same. They are very difficult to seat and, IMO, not worth the effort.
-
On 2/19/2018 at 11:35 AM, Ray_Z said:
Anybody got any idea when the 5 " will be coming out in black? I don't want one in FDE. Afraid if I drop it I'll never find it! Is there a Pro model in 2.0?
I asked at SHOT, they said 2019. I was hoping for much sooner.
Mike
-
Rubber overmold
-
On 1/5/2017 at 8:20 PM, Honeybooboo said:
HKpro is saying that a VP9L will be at SHOT.
I spoke to one of the German engineers at SHOT. He indicated a long slide VP9 release at NRA and a factory extended mag laster in 2017.
Mike
-
Front strap stippling would be a no go in SSP. All stippling must be limited to readily replaceable grip frame parts.
There is also something there for SSP about the trigger position not changing but I would have to find that again.
How will this apply to the Sig P320?
-
I am a little suspicious about such rumors now.
mine was from about 20 years back
and it was about nj state police having cracked 40 slides.
I was not able to confirm the story. I did not hunt old newspaper articles either.
the two are quite similar.
next time some one mentions it, try to get a source.
where they read about it or the name of the people involved.
miranda.
ETA
found this:
http://www.thefirearmblog.com/blog/2015/06/02/hairline-cracks-found-in-kentucky-pds-glocks/
I spent 27+ years as an LEO in NJ between 1984 and 2011. AFAIK, NJSP never issued a .40 S&W pistol. Always 9mm.
Mike
-
Did you have to down load them at all? Or charge for .355 work? I'm going to do all the typical load development anyways to see what shoots properly and what makes power factor out of this specific model anyways. Just curious as for a starting point.I've shot 8K + of the .357 Extreme 9mm through Sigs, Glocks and H&Ks. No problems at all.
Mike
Sent from my LGLS991 using Tapatalk
Same charge.
-
I've shot 8K + of the .357 Extreme 9mm through Sigs, Glocks and H&Ks. No problems at all.
Mike
-
Uniquetek makes one. A bit pricy but it works well.
http://www.uniquetek.com/site/696296/product/T1555
Mike
-
I believe that S&W does make 15 round magazines for the M&P.
-
I load the Xtreme 135 RNFP at 1.100. I get more consistent velocity and the same accuracy when compared to loading longer. With 3.7 gn of N320 I get 968.7 fps.
-
A piece of scrap wood and 15 minutes of labor.
-
Do you guys think the EGW U die is worth getting?
At one time I had problems resizing 9mm case fired from one of my Glocks. I now use the Lee U die. Haven't had a problem in since switching to it. I have no personal experience with the EGW die.
Mike
-
Put on AmeriGlo HACK #SG-533 .220 front-.250 rear.
Can you please let us know of they shoot poa/poi? I find the stock sight on my 320C and 320F shoot high.
Thanks,
Mike
-
They told me the same. But, I though the sight cuts were the same on the 320 as the P series Sig's. ? I have one of Dawsons Charger rear sights for my 226 that I haven't put on yet, but if the cuts are the same why wouldn't it fit on the 320?I talked to Dawson Precision this morning about the P320.
He said they have been working on it and are almost done and the rear fixed sight should be available
in a couple weeks.
I just installed an Ameriglo Sig P series rear sight on my P320. Sight installed with no problems. No overhang on the rear.
Mike
Oh yeah, i forgot about Ameriglo. What part # did you get. Also was the fitment tight, did you need to file it ?
SG-402 plain black rear. Installed without fitting.
Mike
-
They told me the same. But, I though the sight cuts were the same on the 320 as the P series Sig's. ? I have one of Dawsons Charger rear sights for my 226 that I haven't put on yet, but if the cuts are the same why wouldn't it fit on the 320?I talked to Dawson Precision this morning about the P320.
He said they have been working on it and are almost done and the rear fixed sight should be available
in a couple weeks.
I just installed an Ameriglo Sig P series rear sight on my P320. Sight installed with no problems. No overhang on the rear.
Mike
-
Using standard Dillon carbide 9mm dies I ran about 2% of my Glock brass that wouldn't resize properly. In a Dillon 650 I have a separate tool head with a Lee Universal de cap die in station 1, Dillon carbide sizing die (No de cap pin) in station 4 and a Lee undersized (U die) 9mm die (no de cap) in station 5. While more complicated, I've had zero issues since switching to this method.
You can purchase a Lee undersized 9mm die fro Midway or EGW.
Mike
Ammobot Rev. 3 with CP2000
in non-Dillon Reloading Equipment
Posted · Edited by MAP
Clarification
I have an Ammobot Rev.3 running a Super 1050. I'm planning on switching the 1050 to a CP2000 with the ammobot. Is this a direct swap or will additional Ammbot parts be needed? The Ammobot was manufactured in 09/2019 running software version 4.1.6.
Any help would be appreciated.
Photo attached of the right side of the Ammobot.
Thank you
IMG_8316.HEIC