RoryW
-
Posts
94 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by RoryW
-
-
Can anyone give me some insight on case capacity between the following brass makers??
I have loaded the win9x23 and it loads with less powder than the supercomp due to thickness of the case. depending on load, i have loaded up to .5grn less in the win9x23 than supercomp. I tend to save all my 9x23 for practice where i can pick them up and load them over and over. i'm yet to see one split or buldge.
-
I run both supercomp and 9x23 in my gun which is set up as supercomp. as for 9x21, the only thing i would worry about is the length.
-
I am sure a cmore could probably be made to have the capacity to count shots and display the count.
and with technology today, im sure you could get the same size C-more with this feature. hey if your slide ride c-more works so wonderful now why invent the new STS? why would people switch?
-
For the starter, all you need is an accelerator. when the gun is pointing down or at rest you hit the start button. any movement after, starts the internal timer. the mic can be placed anywhere on the scope and as for the C-more the buttons cold be placed on the back.
Carmine, you might want to patent this. I can already see this coming in the near future. all you need now is C-more calling you to help on the design.
-
if you ask me, not a bad idea on an optic. it could have a spy mode and full control of what can be seen in the display. Be careful what you ask for, you never know who's reading this.
-
check the bullet to see if it is straight. i have had bullets get bent and load fine but will do similar things. how this happens is if the pin that holds the round in the shell plate is missing during an up stroke and the base of the case is slightly off the plate, when entering the die it will leave a slight bend in the case or the bullet might have seated crooked.
-
not a big fan, but try installing a sideway mount for your c-more. i hear thats one of the main reasons why they designed it.
-
Dont know how you guys do it with 4.2gr but i load for a G35 at 4.5gr Titegroup, WSP primer, 1.125 OAL and MG JHP and only averaged 930fps (167,400pf). This was chronoed at the Nationals last year and just recently at Florida Open.
-
Did an SPS the other day for a fellow shooter. it holds 30rnd 38SC and 31 9major.
-
-
Any predictions on the weather?
-
i have the same issue. the problem is the failsafe rod is not pulling on the return bar enough and it barely hits creating a snap towards the end of the stroke.
-
i have the parts but unlike alot of people here, mine is installed on top of the shell plate between the bolt, is this correct or am i missing something. i have a 650.
-
i had the same issue last week mounting a thumb rest on my IMM. the only place i could get them was from Derek at Millennium Custom. his shop is close to my house and he his a fellow local shooter. not sure if he will sell them but you could try. i spent 2hrs at grainger going thru their inventory and tried every hardware supply store locally and could not get them either.
-
i have tuned just one of the SPS so far to hold 30rnds. the key to reliability is in the follower. like J said, install grams followers.
Drop in a grams kit on the problematic mags
-
or you could do that too What if you traded me the stippled grip for a stock one?
-
Replace the follower. it is worn and comes up above/beside the slide release.
Hello
I just picked up a real clean SVI Infinity 4" .45 yesterday that came with a handful of magazines. I pulled it apart cleaned it and then tried all the magazines for fit and function.
1-Magazine has two problems:
When you rack the slide the slide won't lock back-I understand this happens
When you rack the slide the slide release pushes out about 1/8" this is more concerning for me !
Any suggestions about this magazine would be appreciated, this is my first 2011 type pistol.
Thank you
Dino
-
Safety is alowing the sear to move. There should be "no" movement of the sear when the
safety is engaged, replace the safety ..
+10
or you could do that too
Having feeding problems with .40 loads
in 10mm/40 Caliber
Posted
just food for thought. what style bullets are you loading. some guns only prefer round nosed bullets. try changing projectile.