kurtm
-
Posts
5,911 -
Joined
Content Type
Forums
Profiles
Events
Store
Posts posted by kurtm
-
-
Yes and no, it will give you a go, or no go indication by hand as the lugs are radial. It will either turn or not turn. The best way is bolt in carrier, but the bolt needs to be stripped of it's extractor AND ejector!
Folks make WAY to big a thing.out of this. If it doesn't drop primers, and or it closes on factory ammo without sticking go shoot the sh#t out of it and have fun!
-
Does anyone make a 20" barrel anymore???
-
Funny all our local ranges have pleanty of room for trucks and cars. Some guys even use their 4 wheelers and tow a trailer. 3- 4 guys can easily work out of one truck / 4 wheeler trailer combo.
-
96 Dodge diesel 3/4 ton single cab truck.
-
Show off! I see there were 24 slots assigned anyone know if we have any standard shooters besides Me and Michael Rush?
-
Ok, so we now have more than just a new receiver. I'm going to go out on a limb and guess you got a T.T.I. spring kit in that new trigger housing? What other changes have been made? Don't be bashful, list them all
. It is real hard to help if we don't know what we are "looking" at.
-
There is a bind or drag on your shell release tab. If you took your trigger group apart make sure the hammer pin's flanged head is on the side the shell release tab is on. If you didn't there is a tight spot or burr in the new receiver in this area.
-
No one like a tattle tail!!!!
-
Unless you are weighing every darn charge it is already happening!!!
-
I'm pretty sure that the U.S. has at least one guy who has won the Nordic in standard, and was 3rd overall and first senior at the first Euro Rifle, and has been senior champ at the Nordic and 4th place in standard, and I'm pretty sure he is and always has shot iron sights and not a red dot.
-
Cause the interweb said so!
-
Hey buddy! You know the rifle groups, you know you can group it to test the zero. You don't need an 8x, take that money and buy more of that great Federal ammo and practice, get off the bench, learn field positions, shoot a lot of off hand, and in general just shoot as much as you can...(I know you don't have much time). A little all the time is much better a than a lot every once in great while. In no time you will be doing great!
-
Many a match has been won with a rifle/ammo combo that only is capable of 2 M.O.A. If your under that, and it is reliable, and the best part is that it is cheaper too, you win!!!
On a side note, I really can't figure out why anyone would say Federal A.E. is junk! For the last 5 years I have used the 55 grian A.E. ball ammo for most every match I have shot, and I am not unhappy with it's performance or consistency. Now I will tell you I some times us their 55 grain ballistic tip load for real long range stuff, like Rocky Mountain 3-Gun where it goes out to 600 or so, but I'm happy with the A.E. out to the 400 yard range. It is good stuff!
-
That should drop right onto your lower. I doubt you will need to change the buffer or spring, as a J.P. 15 didn't use any fancy stuff and are fairly stock as to recoil assembly.
-
I would say significantly smaller the the significant part you mention, but still very significant in the fact it was broke!
-
Thanks Mr. Rose!!! I had been told it was a 3000, but to honest I didn't look. When I found that problem I was done with it! Sorry to seem like I was bagging on the 3000!
On a very positive note, they sent it back and in 2 weeks got a brand new barrel back, no questions asked! Good customer service!
While we are at it, I got a bunch of Benelli parts I just don't need. Shoot me you phone # and we can chat about it! Thanks
!
-
The inertia spring isn't really in contact with the bolt or carrier when it closes. Take you shotgun and shake it front to back and you will hear the spring rattle back and forth. The only time it comes in contact with the bolt and carrier is upon recoil where the bolt carrier compresses the spring Wich shoves the carrier back causing it to cycle.
a heavier main spring DOES NOT help this situation. Mainly keeping the cam pin and cam slot well greased and the locking lug recesses well oiled and clean is the cure.
-
I haven't worn out an AR in a while, if I can get a slot I'm going.
-
I have a set of "coils by Kirk" springs for a 712 if anyone is interested. Standard and 2-3 steps lighter so you can run light loads. P. m. Me if interested.
-
The lighter the oil, the more often you got to use it, but any oil is better than no oil, but I don't feel that it is up to the task on the cam pin and slot. I use Neco moly paste, or any good Extreem
Pressure grease
BTW the Benelli oil works great in in-line drip oilers for air tools, it has a very low viscosity!
-
I've run 20" barrels like forever and they are in no way a handicap! All 556X45MM has going for it is velocity, might as well get what you can!!!!
-
Has anyone seen a refund from this match yet???
-
I have always used 55 grain bullets. I like the Sierra and Nozler ballistic tips. I've never seen the use of a heavy bullet for what we do. Maybe I don't know much about wind and what it does to a "low B.C." bullet, but I seldom can't hit targets out to 600+ in any condition and that is using real iron sights. With an optic where you can see exactly where your holding off, I couldn't imagine needing anything heavy!
-
Criterion makes a great 20" medium contour barrel. Yes the extra 2" of sight radius really helps. Don't go cheap on the front sight, get the J.P. and don't look back. The Yankee Hill sight works OK, but is real prone to snagging on stuff. The longer the sight radius the better, EVERY TIME! Don't worry about the weight after all it will still weigh much less than anything with those funny tubes with glass in them that folks seem to think they need to hit something.
Same AR Bolt Multiple Rifles ~ Checking Go No Go Headspacing
in Rifle - Technical
Posted
Excess headspace will NOT cause a gun to "blow up". It can be real rough on the brass, and a potential eye injurer, although not on the AR platform. It can be hard on the brass, it can cause the primer to back out of the case, and it could cause firing pin erosion. But all that is real minor. Just put on good quality shooting glasses and blast one out, look at the case, and if it looks ok rinse and repeat 15-20,000 times!