MedicineMan Posted February 25, 2007 Share Posted February 25, 2007 I'm hoping someone has a suggestion for an accurate load using this moly-coated bullet. Any powder will do as long as I can get a starting point for an accurate major load. Thanks Link to comment Share on other sites More sharing options...
Aircooled6racer Posted February 25, 2007 Share Posted February 25, 2007 Hello: I am working on a load right now for major. I use Tite Group powder 4.5 grains and 1.180 OAL and Winchester primers. I still have to Chrono them but will this week. Hope this helps. Thanks Eric Link to comment Share on other sites More sharing options...
MedicineMan Posted March 15, 2007 Author Share Posted March 15, 2007 Well, I got to play with the 170 Gr. Precision this week. With an OAL of 1.145 in an STI barrel I reached my target of 170 PF with 4.8 Gr. VV320 and 4.6 gr. of TG. I run the OAL out to 1.250 and it took 4.9 Gr. TG to make 170 PF. I haven't had any reliability problems with the shorter OAL but I wanted to see if I could improve accuracy with the Long Load. Preliminary results seem to indicate this was the correct solution. Greg Link to comment Share on other sites More sharing options...
Harmon Posted March 15, 2007 Share Posted March 15, 2007 4.0 grains titegroup at 1.125 oal makes major in my glock 24 with a 6 inch KKM barrel i only shot 500 of them though... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now