purecharger Posted April 4, 2014 Share Posted April 4, 2014 I've been using H110 for .44mag in my 1050.I've noticed the same thing but it hasn't been a show stopper. Every 300 rounds or so I blow out the shellplate and any accumulated powder with my air compressor. Link to comment Share on other sites More sharing options...
Mavrick379 Posted April 4, 2014 Share Posted April 4, 2014 I have to blow my shell plate every 25 rounds or so, if I don't powder gets on the primer stem and dents the primers. Link to comment Share on other sites More sharing options...
michaelnel Posted April 4, 2014 Share Posted April 4, 2014 I check the primer ram frequently and when I see something on it I just lower the handle enough to expose the primer ram and wipe the stuff off with my fingertip. Link to comment Share on other sites More sharing options...
michaelnel Posted April 6, 2014 Share Posted April 6, 2014 Dillon gave me an RMA and I have sent the powder measure body and large powder bar back to them. Hopefully they can find a pair with less slop. Link to comment Share on other sites More sharing options...
michaelnel Posted April 11, 2014 Share Posted April 11, 2014 I had sent Dillon just the lower part of my measure's body along with the large slide. Today FedEx showed up with an entire measure with both slides, and it appears the problem is fixed. The new lower body has a much tighter clearance with the slides. Thank you, Dillon! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now