hardluk1 Posted March 21, 2009 Share Posted March 21, 2009 (edited) I have a one of the front sites from henning that my old bad eyes could not still see well so after some time i called and henning send me some of the large diameter red inserts that would be used in the stock ,short front site not knowing if they would work or not in hennings site. I drilled the ,090 wide site he makes with a 1/16" bit and then filled and polished off the edges so there is a minimum of material left and when the tip is heated it is as wide as the site itself. I will try this tomorrow in my area indoor range as the light is far from good on the line to see if it helps me. very bright in normal conditions. Drilled the rear site to but could not get enough light to the red insert with out more work so just put som flouresent paint on it for now. Edited March 22, 2009 by hardluk1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now