Franklin7X57 Posted April 5, 2007 Share Posted April 5, 2007 Got the turret and have loaded about 600 rds. now the LPS Primer Arm doesn't want to go under the shellholder with a primer in it. Wiggle the lever a little and it goes in. Does the Pivot Pin(part #2885) have anything to do with it? Thanks. Frank Link to comment Share on other sites More sharing options...
stubbicatt Posted April 6, 2007 Share Posted April 6, 2007 Got the turret and have loaded about 600 rds. now the LPS Primer Arm doesn't want to go under the shellholder with a primer in it. Wiggle the lever a little and it goes in.Does the Pivot Pin(part #2885) have anything to do with it? Thanks. Frank I have found that if I remove the primer arm and clean inside the ram and make sure the edges of the primer arm is clean, these stoppages quit for awhile. Clean under the shellholder too. I also stoned the sides of one of my primer arms to increase reliability. Great press for my needs. Link to comment Share on other sites More sharing options...
TLD Posted December 9, 2007 Share Posted December 9, 2007 Got the turret and have loaded about 600 rds. now the LPS Primer Arm doesn't want to go under the shellholder with a primer in it. Wiggle the lever a little and it goes in.Does the Pivot Pin(part #2885) have anything to do with it? Thanks. Frank I have found that if I remove the primer arm and clean inside the ram and make sure the edges of the primer arm is clean, these stoppages quit for awhile. Clean under the shellholder too. I also stoned the sides of one of my primer arms to increase reliability. Great press for my needs. I did the same thing and also ground the bottom of the arm slightly. It wasn't exactly parallel to the axis of the case and would sometimes be problematic. I shouldn't have traded that little press. I loaded thousands with no problems. Never wore out the plastic auto index piece either. Link to comment Share on other sites More sharing options...
98sr20ve Posted December 17, 2007 Share Posted December 17, 2007 Got the turret and have loaded about 600 rds. now the LPS Primer Arm doesn't want to go under the shellholder with a primer in it. Wiggle the lever a little and it goes in.Does the Pivot Pin(part #2885) have anything to do with it? Thanks. Frank I drilled and tapped the arm so that a could put a bolt thru it and adjust the bolt down so that the arm moves up sooner. Totally solved the problem FOREVER. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now