Chuck Anderson Posted February 17, 2007 Share Posted February 17, 2007 Took mine out and printed it the other day. Biggest group (sloppy on the trigger) was under 3". Best groups ran right about 1" at 25 yds. M&P9 with a Warren rear sight and factory front. Nothing else done to the gun using Atlanta Arms 147 gr Team Glock load. Link to comment Share on other sites More sharing options...
Zerwas Posted February 17, 2007 Share Posted February 17, 2007 Here is a follow up to my post from yesterday on the accuracy problems my buddy was having with his after 75 rounds.............. We went to the range together today and popped off a quick 75 rounds. I then proceeded to print a 1.5" group at about 15 yards with the pistol. I gave it back to him for him to shoot. I noted right away he was having issues with his trigger control. I corrected that slight problem and bingo, he was printing much smaller groups than he had previously. He shot almost 200 rounds and had a large smile on his face after that range session. Problem solved.... Link to comment Share on other sites More sharing options...
ysued Posted February 17, 2007 Share Posted February 17, 2007 Took mine out and printed it the other day. Biggest group (sloppy on the trigger) was under 3". Best groups ran right about 1" at 25 yds. M&P9 with a Warren rear sight and factory front. Nothing else done to the gun using Atlanta Arms 147 gr Team Glock load. Someone needs a Dan Burwell Trigger Job Y Here is a follow up to my post from yesterday on the accuracy problems my buddy was having with his after 75 rounds..............We went to the range together today and popped off a quick 75 rounds. I then proceeded to print a 1.5" group at about 15 yards with the pistol. I gave it back to him for him to shoot. I noted right away he was having issues with his trigger control. I corrected that slight problem and bingo, he was printing much smaller groups than he had previously. He shot almost 200 rounds and had a large smile on his face after that range session. Problem solved.... I figured it was trigger control problem. I had a hard tome getting used to the trigger reset on mone the first time I used it. A good Trigger job wouldn't hurt either Y Link to comment Share on other sites More sharing options...
Zerwas Posted February 17, 2007 Share Posted February 17, 2007 Yeah, I talked with him about a week ago and I told him it was more than likely issues with his trigger control. I don't think he liked my answer to him (kuz it HAS to be the guns fault, right?). I proved it to him last night though. In the end he was a happy camper. That's all that matters. Link to comment Share on other sites More sharing options...
ysued Posted February 18, 2007 Share Posted February 18, 2007 Yeah, I talked with him about a week ago and I told him it was more than likely issues with his trigger control. I don't think he liked my answer to him (kuz it HAS to be the guns fault, right?). I proved it to him last night though. In the end he was a happy camper. That's all that matters. It's a good thing that "You" proved him that it wasn't the guns fault, now he can concentrate on mastering the M&P and have fun with it. Have your buddy get a Burwell Trigger Job for his M&P, his trigger control will improve considerably. Y Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now