Glock trigger not Resetting after reassembling frame.

[Arakisk]

Originally, my G34 was having issues with the trigger stopping its reset just short of engaging the trigger safety. took the whole frame apart, cleaned it the best I could, and reassembled according to a mix of reassembly videos (ensuring to reinstall the trigger spring in the proper "S" configuration). After reassembly, the trigger will halt its reset immediately after clearing the connector, much too short to return to its originaly position. It feels like there is a "hitch" in the trigger traveling forward when I manually try to push the trigger back to its original position. Any ideas or solutions?

[Arakisk]

UPDATE: Found the issue. Trigger spring had partially rotated on its hole in the trigger bar, allowing it to collide with the plastic of the trigger housing when trying to reset. Fixed by being careful with insertion of the trigger bar/cruciform into the trigger housing.