CMC 9 mm trigger problem

[lucas]

The  CMC 9mm drop in trigger does not seem to fit well in a colt dedicated lower. The pins are to long leaving the trigger loose and if you slowly lower the bolt it will hang up and not travel all the way forward but If you operate it as normal it seems to work, although I have not shot it yet to know for sure. I also tried a KNS trigger pin set, also no help.

 

I ended up using the pin set that came with the CMC trigger. The pins that they are using have screws on each end ,so to take up slack ,I put a c clip from a  older pin set under each screw head . I think having to do this sucks and may not work. I can't, even get a hold of cmc on the Internet , for some reason.