usmc90 Posted February 15, 2015 Share Posted February 15, 2015 I have been reading through alot of related posts and not quite found what I'm looking for. I am looking for load data using the coated SnS 147fp (or similar) and Wst or possibly power pistol .. sitting on 10lbs. Of WST already Link to comment Share on other sites More sharing options...
Pete Whyte Posted February 15, 2015 Share Posted February 15, 2015 I load a 147gr.Bayou coated flat point with 3.5grs.WST. oal 1.14 132pf. also 3.4grs WST oal at 1.129-1.30 130pf. 5 inch M&P pro. Hope this helps, Pete Link to comment Share on other sites More sharing options...
robb315 Posted February 15, 2015 Share Posted February 15, 2015 I had very similar results to Pete. Link to comment Share on other sites More sharing options...
usmc90 Posted February 15, 2015 Author Share Posted February 15, 2015 (edited) thanks guys , Rob you also tested using the same gun I will be using. . Were your loads similar to Petes? Edited February 15, 2015 by usmc90 Link to comment Share on other sites More sharing options...
robb315 Posted February 15, 2015 Share Posted February 15, 2015 (edited) thanks guys , Rob you also tested using the same gun I will be using. . Were your loads similar to Petes?Used a 147gr FP Bayou bullet at 1.135" with Federal and Winchester brass and a WSP primer.This is just a test of some different powders I have. My normal load is with N320 and I use 3.3gr for approx 130 pf. Edited February 15, 2015 by robb315 Link to comment Share on other sites More sharing options...
usmc90 Posted February 15, 2015 Author Share Posted February 15, 2015 Judging from a burn rate chart the n320 and Wst aren't far off .. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now