SyberShooter Posted October 29, 2011 Share Posted October 29, 2011 (edited) This is the attachment with table data at the end for the main post - I ran out of upload bytes and my pdf is also too big. This table will be helpful since the table data all ran together in the main post. and here are the last two sets of photos I didn't have room to attach - if a moderator would like to fix up the original post with this stuff, this post could be deleted. TZZ- Avg.Wt.=85.2 , SD=1.1, Case mouth a little on the thick side. Good Mouth2Seat & web, other dims average. nny- Avg.Wt.=79.1, SD=0.9, ppd=.128, hd=.474, A very light case with thin but uniform walls. Convex floor and thinner web type. OD of head largest of the group (.474”-also PMP) and very deep primer pockets (.128”) Probably best as recycle trash if unable to be used for plinkers. back to the original post Edited October 30, 2011 by SyberShooter Link to comment Share on other sites More sharing options...
calvary45 Posted October 31, 2011 Share Posted October 31, 2011 WOW. You really do have alot of time on your hands. Thanks for the interesting info. Link to comment Share on other sites More sharing options...
checkenbach Posted November 4, 2011 Share Posted November 4, 2011 Thanks for taking the time to do this, quite an eye opener!!! Link to comment Share on other sites More sharing options...
Graham Smith Posted November 4, 2011 Share Posted November 4, 2011 (edited) Must be a bit early in the morning because it took me a few to figure out what a "bucket table attachment" was or what this had to do with it. BTW, this gives me just another reason why I don't shoot .45 Edited November 4, 2011 by Graham Smith Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now