Jin Posted July 2, 2011 Share Posted July 2, 2011 (edited) My 21 inch M2 was shooting slugs 12 inches high and 6 inches to the left at 50 yards. i didn't trust myself to try and bend the barrel, so I had a local smith dovetail a Marble front sight onto the vent rib. Using the marble arms error correction table I estimated the sight with .343" height would be the closest (part number 603426). Midwayusa carries these sights. http://www.marblearms.com/frontSights_info.html It's great that the "ramp style" sights are really close in width compared to the vent rib. word of warning...the marble fo is actually pretty small 3/32". was able to test it out today at the range, i have a picture of a 50 yard target (3 shots) and a 100 yard target (4 shots). i'm pretty stoked because initially with the factory sight...i wasn't even on the paper at 50 yards. Edited July 2, 2011 by Jin Link to comment Share on other sites More sharing options...
Jin Posted July 2, 2011 Author Share Posted July 2, 2011 doh...double posted same picture twice. meant for this one to be in there. Link to comment Share on other sites More sharing options...
bkoenig Posted July 5, 2011 Share Posted July 5, 2011 doh...double posted same picture twice. meant for this one to be in there. Looks really good. I also dovetailed a front sight into the rib of my 930, but it was a Hi-Viz meant for a 10/22. I also dovetailed the rear sight in there as well. Works great for slugs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now