Adam P. Posted February 22, 2010 Share Posted February 22, 2010 I just got some WSF froma buddy. I found some data on Hodgdon's website, but was wondering if anyone here has any 1st hand knowledge with WSF and 115gr Berry's plated RN bullets. Thanks Link to comment Share on other sites More sharing options...
freakshow10mm Posted February 22, 2010 Share Posted February 22, 2010 (edited) Yup. I run 5.5gr WSF with Berry's 115gr RN set to 1.15" OAL in my H&K P7. That's the only load I feed it and runs very well. ETA: Chrono'd at 1153fps 607 ft above sea level. Edited February 22, 2010 by freakshow10mm Link to comment Share on other sites More sharing options...
barney88pdc Posted February 23, 2010 Share Posted February 23, 2010 (edited) I do not have any Berry's data but I have the following chrono data that may be useful. Brass: Mixed Primer: Wolf SP Powder: 4.9 WSF Bullet: 115gr Remington FMJ RN OAL: 1.169 Shot from a factory G34 Avg Vel: 1064 PF: 122 So I am going to need to up the charge a bit to make PF but thought I would share. Edited February 23, 2010 by barney88pdc Link to comment Share on other sites More sharing options...
Adam P. Posted February 23, 2010 Author Share Posted February 23, 2010 I do not have any Berry's data but I have the following chrono data that may be useful. Brass: Mixed Primer: Wolf SP Powder: 4.9 WSF Bullet: 115gr Remington FMJ RN OAL: 1.169 Shot from a factory G34 Avg Vel: 1064 PF: 122 So I am going to need to up the charge a bit to make PF but thought I would share. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now