h2osport
-
Posts
640 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by h2osport
-
-
For longevity, the only way to go is cast iron pump and belt driven. I would not recommend the cheaper import stuff with too many corners cut.
Purchase this unit, and it will give you 20+ years of trouble free performance. I have had mine for 13 years, and only checked/changed the oil. I have worked on many of the previous pump design models installing pressure switches and components that are well over 30 years old.
http://www.grainger.com/Grainger/SPEEDAIRE-Portable-Air-Compressor-1NNF6?Pid=search
Buy a direct drive and or oilless unit, and you will buy several. Buy a good quality belt driven unit, and you should not have to replace it.
Randy
-
You really should not have to trim your pistol brass. Straight wall cases are not known to stretch much when fired. Also, the majority of pistol bullets do not have a cannelure groove. Check your case length and i think you will find they do not need trimmed.
Randy
-
Storage containers for my stuff I am not using right now. Shelving from Costco to put the storage containers on. All 45 mags in one container, 9mm in another, 40 in another, etc. I usually leave commonly used magazines in Shooters Connection magazine storage pouches stored inside the containers. That way I can grab the pouch with 6-12 magazines of any given caliber and throw it in my range bag on my way to the range. I like the clear storage containers so I can see what is inside.
Randy
-
Come on over to Missoula and shoot some USPSA matches with Big Sky Practical Shooters.
Randy
-
It is not the press, it is the primers. I have had a couple of lots of bad CCI primers lately. Way out of spec, and oblong. It is hit or miss with the CCI primers I have. CCI says there is no way I could have primers that far out of spec, but they will not even come close to going into the primer tube.
Randy
-
For hand trimming, I use a Lyman. I like the universal cam collet set up, so I do not have to have shell plates for different brass.
Randy
-
Lee parts and dies are pretty cheap, so you should be able to get it running in 9 for a reasonable price. From what I hear from 2 friends who load on Lee progressive presses, the Loadmaster is a way better press.
Just an FYI, you can get shoot a Glock 21 in 45acp, and it is not very pricey. You can also pick up some pretty decent values in 1911 like the Taurus PT1911 for around $550
Randy
-
My brother and my wife run it on their phones, and both love it. They do not offer it for a Windows phone, so I can not use it for now.
Randy
-
What ranges are you shooting? My go to for a newby to precision rifle would be a Nightforce NXS 5-25x56. I am an MOA guy, so I really like the NPR1 reticle, although I also have the NPR2. You really can not go wrong with this scope, and can recover almost all of your money on the used market if you want to try something else(although I doubt you will).
Optic quality on my U.S. Optics 3.5-25 is superior, but the scope is quite a bit more money, and heavier.
Randy
-
If you do use an Air assist nailer on Pre-finished flooring, try and get one that has the wider pre-finished flooring shoe on it. The wider shoe spreads out the impact energy of the tool so you do not chip the edges of the finish. It also has urethane rollers in it to keep you from scratching the flooring from sliding the nailer.
Randy
-
I have several of the Shooters Connection Mag Bags(http://shootersconnectionstore.com/CED-Magazine-Storage-Pouches-P145.aspx). Keep magazines of different calibers in them. You can take them to a local embroidery shop, and have your caliber/brand embroidered on them.
Randy
-
A mile from home? I got kicked off for a week one time, and had to walk 8 miles each way to school. And it was truly up hill both ways(large hill in the middle of the trip). Dad told me if I took a ride from anyone, I would really be in trouble.
Had to get up at about 5:00 to get going and be to school on time. Grade probably 7th.I did however have a lot of fun growing up.
Randy
-
That is very thoughtful of your wife.
My school bus drivers did not care that much. Got kicked off a few times, and for no reason at all.
Randy
-
My outlook is simple. The shooter must be ready when it's their time to shoot. No excuses.Eeither you are ready or you're not. If you step into the box then step back out you need to be on the clock. Why? You are wasting the time of others and should receive some penalty for not being ready to shoot when called. You make my point by speaking about the factors involved with 90-100 shooters. Respect your fellow shooters and be ready when called.
I was gonna respond, but not sure it is worth it. Just curious how many people would be willing to reset, run the timer or scoreboard, or pick brass with your opinions enforced. Seems to me much more time would be wasted waiting for people to help out.
Randy
-
Oh yea, a .45 is more manly also!!!
Rob
Like you really know anything about single stack!
I was gonna post something about the original question, but I defer to your comments.
Randy
-
I think that your cardboard does not match the pasters!
You should check with the target manufacturer and see if they can change the color to match your pasters
Randy
-
Use your pistol to get to your shotgun. Use your shotgun to get to your rifle.
Shooting practical rifle at ranges of 800-1300yds, 9 targets, 3 minute par time, will definately get your blood pumpin for the rifle.
Randy
-
I have gone from N320 to Titegroup. The titegroup meters better and gives more consistent results.
Randy
-
FYI I built mine on Iron Ridge Arms lowers, and by the time it was all said and done, I had over $2000 in each one. Top shelf components, but everything is more expensive for the AR-10.
You might look at starting out with a DPMS factory gun, and swapping out components as you get the funds to get it where you want it.
Randy
-
The only argument I have heard against 231 is that it is dirty. A good friend prefers WST with is own cast lead. Since my guns need cleaned anyway, 231 works fine for me.
Randy
-
I shoot mostly Limited because it is the most competitive division in my area. I shoot all divisions, and like mixing it up, but definately shoot mostly Limited.
Randy
-
I use the Elite Iron supressors(http://www.eliteiron.net/). Dale has an awesome baffle design, and the suppressors are phenominal. I run one of his Bravo 1 cans on my 308, and it will even handle my 300 win mag.
Randy
-
I have a couple of Nightforce scopes, and love them. I am an MOA guy, so I cannot comment on the Mildot. I do however prefer more magnification over less(depending on situation). I have a USO 3.8-22 on my AR-10(built very similar to SASS), and I love the 22 power, but I am shooting out to 1300 yds.
The scope you are looking at is not a FFP scope. You might take a look at the Nightforce 3.5-15x50 F1 scope which is FFP.
As most said, 10X is enough power out to the 6-800yds you are planning on shooting so find some more distance and stretch your guns legs. The nice thing about any of the high end optics, is that you can get most of what you paid back out of it if you do not like it, or mount it on a different rifle for longer range shooting.
Randy
-
Am I missing something? I have shot 1000s of trouble free reloads through all of my Glock with stock barrels. I shoot BBI moly coated bullets, lead would be the only reason I would not use the stock barrel. Save the $100+ and by more bullets.
My brother ran 1000's of reloads thru his Glock 35 as well, but at or around #15000, his barrell is gone as well as the rest of the gun. I am not saying that it will happen, just that it does happen. When his chamber went, it took the rest of the gun with it. No warranty, but Glock did exchange for a new gun for Aproximately $400(I do not know total with shipping).
Pistol pressures range between 17,000 and 40,000 psi whereas rifle pressures run between 45,000 and 65,000psi. I would prefer a pistol barrel made out of material to handle the higher pressures.
Just my opinion.
Randy
Had to get up at about 5:00 to get going and be to school on time. Grade probably 7th.
Air Compressor Recommendation
in Miscellaneous Topics That Do Not Fit in Any Other Forum
Posted
NO, NO, NO
No benefit to the 200psi other than the piston cylinder will wear out faster if the belt does not go first.
Do not get caught up in a numbers game. Compressor manufacturers are always looking to throw a number out there that will sell the compressor, but most times it will not help the consumer. You do not need a compressor that pumps over 125 psi for any normal operation. 2 stage compressors run up to 175 psi because of the basic design effeciency, and in industrial aplications this gives you more draw down.
Randy