Pink_Vapor

Have you used both of them? I got a Pocket Pro II and really liked it except; - With gun & mag holsters the only available real-estate is in front and keeps me from being able to pick anything up off the ground. - It doesn't pick up dry fire - It's quite bulky The CED & AMG pick up dry fire & are a better size. The CED is a Chinese product. According to AMG, they use higher quality switches, and it doesn't have issues getting rained upon, and it's US made. I don't mind waiting for delivery. What are your thoughts? Go! https://www.amg-lab.com/ https://benstoegerproshop.com/ced-7000-ced7000-electronic-shot-timer/

It looks like you nailed it, and I somehow missed your post. The # on the Gen5 ejector is a 47021 I found this vid as well. Below are the Gen3-5 ejectors

From a tip I received on another forum, "it was time to replace the extractor spring when the brass starts hitting me in the head". I replaced the $3 extractor spring, now the 124g rounds with 5.0g and 5.2g of Pistol CFE are now piling the brass up at 3 o'clock.

I shortened the COAL by ~ 0.015" to 1.115", shot two mags with no DPP impacts Maybe that was the fix, or I needed to run another mag. I also ran 2 mags with 5.2g of CFE, still no DPP impacts, avg bullet speed 1140 fps. The CCI primers are flattening out at 5,2g. Per suggestion I then replaced the extractor spring as well. Extractor claw clearance is 0.050" to 0.069", mine's measuring 0.060" GTG. I'll report back after a few hundred rounds have been through it.

Are the guns factory, and what are you using for ammo?

It already has the ejector 30274, so that's no going to be a fix. I received another response elsewhere: "That is the correct current recoil springs for a Gen 4 G17/34. For a Glock 9mm Extractor clearance will be 1.27mm for Go and 1.80mm for No Go. Check for broken or damaged ejector-Replace trigger mechanism housing with ejector. 9m should have 336 engraved on it.

This thread is exactly what I was looking for! My DPP on a Gen4 G34 is getting hammered after only a few hundred rounds. I'm shooting; RMR 124g TC bullets, CCI 500 primers and 5.0g CFE pistol powder. Is the ejector 30274 the consensus fix? I purchased the gun used, so I'm not sure of the springs, how can I tell? The extractor reviews on Brownells weren't encouraging. I'm a bit confruzed on the Gen5 extractor link posted above gen 5 extractor , it goes to an Extractor Depressor Plunger /Spring Thanks!