Bud White
-
Posts
127 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Bud White
-
-
That is one SWEET looking Piece
-
Any ideal where to get a mag catch to allow the usage for sti mags in a ria?
I swear I found a link onec on the forum but can't find it again
I'd prefer to go that way for my ria 40 since the newer para mags are short and won't clear mag well with out buying bunch of parts
-
I am 600 / 700 rounds through this one and would not hesitate to buy another.
Watched this video the other day great video .. good to hear that its been flawless so far
-
How is the Quailty of the Pantera ? Any High round count users .. I'd like a Sti but cost for just a range toy
-
Great Video i want one in 45 just cuz
-
I'm still working on my hi cap 40/10 for mags locking back with rounds left usually 4-5
Sent from my SCH-I545 using Tapatalk
-
I thought so too
Sent from my SCH-I545 using Tapatalk
-
I got the basepads from mags one my 40 they will not fit with out grinding on them and still don't go up in magwell good enough .. they are also plastic not steel like the mag that comes with the gun
Sent from my SCH-I545 using Tapatalk
-
Where do you get one
Sent from my SCH-I545 using Tapatalk
-
That's very cool
Sent from my SCH-I545 using Tapatalk
-
Just picked up a Safariland ill have to get package for model # that fits my 40
-
-
Great Looking Pistol
-
Are you looking to go gi style or another full length?I'd like to replace the guide rod assembly on my tac ultra 40, what type can i get? Specifically, which actual unit can I buy that will be a drop in?
Gi will drop in though u have a open spring cap. But you could always get a closed one that supports barrel from briely
Sent from my GT-N8013 using Tapatalk
-
Does it do it with 1 mag or all?
-
Very nice
-
Just break the edges lightly polish I'd do it by handI have the Tac Ultra 40 with the ramped barrel. On the sides of the ramp, the edges are very sharp leaving decent size scratches on my brass. My question is, would it hurt to dremel/sand those edges down? I'm thinking it will help with feeding and extracting if I did but I don't want to bother if it'll hinder the performance any more than it already does.
Sent from my GT-N8013 using Tapatalk
-
para 16-40
in Para
Is it a pxt extractor in it if so egw works the best
Sent from my SCH-I545 using Tapatalk
-
So you have the longer frame then thx for info
-
@dogtired Thanks. Seems like the S&A magwell is the only way to be able to use the short Mecgar P16 mags. I bought a couple of these mags just to learn it will not fit my RIA, with the Dawson Ice magwell installed. Too late to return them now.
How does the ice magwell fit no gap at bottom of Frame to magwell?
-
I read if you but the basepads from advanced tactical it will let the shorter mags fit my factory ria mag is a short mecgar with the base pad.. has same # stamped on tube as the mecgars
Sent from my GT-N8013 using Tapatalk
-
.040 is what's I'm my ls hunter should be the same
Sent from my SCH-I545 using Tapatalk
-
Happen to have a link thx for infoOn the slide locking back with a round left.......there is a YouTube vid showing where to "file/cut" the follower with a utility knife. Holding the nose of the mag away from you, it's the left side/nose corner.
Sent from my SCH-I545 using Tapatalk
-
Yes on my 40 I could see where the Bullet was rubbing slide stop so I filed it down some.Has anyone else experienced the slide locking back with rounds still in the magazine? At first I thought it was the slide stop, but I just switched it and still getting the same problems.
That fixed it with random # of rounds left in mag.
Now it does it with just one.
I was gonna dimple slide stop and have the drill bit tool to go through the plunger tube to do it but didn't even make a mark in the end if slide stop
Gonna get a spring loaded center punch and punch it first and try again.
Sent from my SCH-I545 using Tapatalk
SPS Pantera! 9mm Budget conscious 2011 clone
in 1911-style Pistols
Posted
great vids as always weird i didnt get any notifications about updates to this thread