-
Posts
127 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Bud White
-
-
Have a 41 with the 5.5" 7" and 7 3/8" comped barrel my favorite 22 pistol .. runs anything I feed it I dated it back to the early 60's I have it wrote down somewhere but don't remember exact year off the top of my head
-
Mine is easy to rack the slide also and use the release .. Good Cleaning maybe?
-
I just got some more mags from sig under the same # as I have ordered before and they are now a different wison combat mag the pads I listed fit but now they have the split follower instead of the plastic and has the spacer as you first pic shows ,, little disappointed with the new mags
-
the ones that came with mine were wilson combat the 47ben are the long pads the fit them and made then drop below the mag well
-
10 minutes ago, LawDog324 said:
I had the same thoughts on the Romeo 1, just to many issues and bad reviews. Now they're coming out with a new one but unsure when and what footprint. Being able to mount direct to the slide was a plus, but I ended up getting the Vortex Razor 6 MOA.
DK
The Romeo 1 pro is a different footprint must match the delta point as they list them 2 as direct mounts .. Really wish sig would have went the way of FN or Canik while not direct mount to the slide it gave you a lot more options of what to use
-
49 minutes ago, Rudukai13 said:
They replaced the one I sent in with a new one, correct. Which was really my preference - The old one was a relatively early generation, the new one will have the most up to date circuit board and programming
Thats awesome .. be interesting to hear if it holds up .. I use mine for play mostly and in winter time it doesn't get used much at all
-
SO the they sent you a new R1? I do like them esp the auto off and on but keep reading people having problems thinking of a vortex on my x5
-
i don't see much need to upgrade if i can make what i have last .. Not sure why the Rx seems to catch it in the frame of the RX not like a 1911/2011 where you can easy tube extractor don't know how often it hits but i can see the marks where it has
i have a second romeo 1 sitting here and deciding between it and a venom i also have sitting here to go on x5 no plate if i use romeo but need a plate for venom ..
-
How are you liking the Shrouds i notice that no matter what ammo I'm using I'm seeing it hit the romeo 1 on my RX .. wondering if i will have the same issue if i use a romeo 1 on my X5 so thinking on the shroud now
-
I really like the X5 I just picked up another one on a sale the local dealer had i think this one I'm going to put a red dot one and maybe gray gun comp kit in both the x5 i have one in another p320 and it makes a huge difference
-
The Romeo Pro they been talking about in the X compact Vid ?
-
That sucks waiting is the hardest part
-
1 hour ago, Rudukai13 said:
Absolutely (not my picture, not my gun - Credit to Henry Holsters);
https://www.henryholsters.com/product/fn509comp/
Thats nice might be my next project depending on how things go with work
-
I was thinking a fn 509 tacticool would be a nice one to do this to also
-
Cant wait to see the tweaked one i have a few ideals i'd like to do also
-
I would go 357 Sig for the extra oomph.. i enjoyed my 357 sig when i had one in a 229 and as you said the comp would work better.. 38 super would be awesome to bad its just to long
How is that mount and where did you get it i see it says carver but can't read the rest thats a interesting setup wouldn't mind something like that for my 1911 railed 10mm a optic would be nice
-
On 9/28/2018 at 1:55 AM, Rudukai13 said:
The reason I purchased the shroud kit is due to Aaron Cowan's drop test results from his Romeo1 test. That being said, I use this gun as a defensive pistol too - So shattering the optic lens could have more dire results in my case than just blowing a stage at a match...
I saw the video to and right now i haven't put enough rounds thru it to trust it for carry .. be interested in what you think of the shroud once its mounted. ive switched to 10mm sine i will be in the woods quite a bit from now to December want a more power incase i run into a sow with cubs i have 3 different ones on my cameras so i know they are around
-
I’ve seen it quite a few times with 115 and 124 can see the marks where paint is coming off never seen it hit with 147 grain rounds always know when it does throws the brass straight forward
-
Wonder if it would keep brass from hitting front of optic on the guard
-
Welcome from Michigan
-
1 hour ago, Rudukai13 said:
I’m interested to hear how it is the Grayguns kit and trigger is awesome but not for carryfor sure. I have a Alex only trigger in one 320it
feels good but interested in pull weight you get with full kit
-
Awesome work .. took a lot of nerve to cut the slide and get started i bet ..not sure i would have wanted to
-
15 minutes ago, Rudukai13 said:
Got a couple of shipping notifications in fairly rapid succession today, more good stuff on the way...
I love that love the delivery notices more got some stuff shipped pretty quick sister is picking up mail while I’m on vacation says I’ve got few packages of goodies waiting for another project I’m working on
-
I use one it works very well have extra pieces to put it on all my other ar style rifles as i reload and want to keep as much brass in good shape as possible
My 10mm ejects brass into next county
in 1911-style Pistols
Posted
Flat bottom dining pin stop will help but you will also need to up the springs 22 -24 for recoil and 23# main is what I run on most the 10’s if your using real 10mm Ammo