chubs3a
-
Posts
43 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by chubs3a
-
-
1 hour ago, Chills1994 said:
This is just a box stock LTT model. This was only my 2nd attempt for that particular drill that day:
My goodness! that's disgustingly sweet.
-
Watching is good for as others mentioned - data.
I especially watch newbies shoot stages "just in case". There was an instance when I just started shooting and I wasn't paying attention. All of a sudden I see a few veteran shooters duck and move and sprint. A newbie broke 180 HARD and made a few guys nervous.
-
On 7/22/2021 at 9:09 AM, 11287 said:
P07 with Cajun Gun Works Kit. Had to have the milling done for optics. Pictured with decocker but can be swapped out for safety.
This is gorgeous!
OP- I would go this route. Jagewerks has a pretty affordable optic cut cost (and if you can wait until Black Friday- it gets cheaper!).
-
10 hours ago, MrUnderwood08 said:
I did my own trigger job this last weekend. Used the Langdon trigger bar in NP3, an Elite II Hammer ...
Have you tried the Beretta Match hammer? It's kind of a game changer.
-
6 minutes ago, Dirty_J said:
You don’t change mag bodies annually?
Nope lol... guess I will now!
-
big fan of Arrendondos. I have had the Dawson extensions in the past, but got rid of them as over time the extensions wore down the bottom part of the mag. Dropped a full mag and everything blew up lol.
-
Big fan of Holosun. I run a 507c v2 and the 509t.
Find what fits your budget, then as always practice with it if this is your first time with an optic.
-
2 hours ago, Rolex said:
I just got the plate for my G48 MOS and Holosun 407k x2 GR. The screws are too
long and hit the ejector rod!
Anyone else have this issue- PS just got it Saturday- and they where closed, so
ill call Monday and see what they say- also the screws are not black but silver!!
I run the same set up and no issues here. Are you using the supplied screws that were in the CHPWS kit?
-
On 7/13/2021 at 9:27 AM, MrUnderwood08 said:
Do the mecgar 18 round magazines with Taylor Freelance basepads (sold for use in Canik) fit the box?
Unsure about TF, but Henning extensions for the CZ platform and Springer Precision extensions for sure fit.
-
Yes. The G conversion/option is a standard option offered by Beretta. A few Beretta guys I know run the conversion at matches with no hiccups.
-
This might sound silly, but I gave the LTT Beretta a shot because it was "different".
There are a good amount of shooters at local matches that are CZ fans and swear by it. Great guns, shoot great.
I picked up a M9A3... the the LTT Trigger Job in a bag... and the better shooters were impressed. I splurged on a LTT with NP3 coating and right off the rip impressed with it.
It just hits different. When people ask me what i'm shooting and tell them LTT, the response was always, "Ooooooooooooo lemme see that." lol!
If you do end up getting one, get one with the TJIAB installed from LTT. They put some extra "sauce" on it!
-
I have two of their plates - one for the 507c and 509t. Both are working great and have great finish and tolerance.
I have also seen that if they have a new version out for the plate that you can send yours in and upgrade for a small fee. Not too shabby!
-
Big fan of the OEM mags and Arrendondo base pads.
I also run the Dawson extensions and the magpul 21rd mags, but will probably sell these and get more Arrendondo because I'm OCD and want everything the same lol
-
I have the trigger on my SP01 shadow. I was a little hesitant about it "pointing too forward", but after dry firing it for a little bit I don't mind it at all.
I will say the trigger in single action is PURRRRRRRRTY.
-
On 6/30/2020 at 10:13 PM, gnappi said:
In the above post I also received a Tanfo magwell, and I just ordered another magwell from them at: https://jandlgunsmithing.com He said he has more left... I thought some of you might like to know.
Nice guy, F-A-S-T shipping
What magwell did you get? I called him directly earlier this year about getting a Henning magwell and he said he didn't have any. I then called Henning directly and he said he wasn't planning on making any in the near future (maybe that has changed?)
-
19 hours ago, Zebraman said:
Hi,
I have a couple of EAA Witness small frame guns that need some attention. How is EAA to deal with these days? I have dealt with them in the past, and was not impressed. One of my guns needs a new top end it's a 9mm and I was thinking about getting a 9mm long slide with the super sight. I also need a couple of trigger bar spring assemblies.
Thanks!,
Z
You'll probably have the same experience. I called them about a few months ago about a potential issue with my Limited HC and the lady I spoke with seemed as if she was being bothered. She asked me to go into detail, and when I was done she just said, "Just send it in, but no guarantee we can fix it." And that was it.
I know what I typed doesn't represent inflection, but imagine if you were talking to a valley girl that was in the middle of applying her chapstick- that's the vibe i got lol
-
On 8/21/2020 at 12:26 PM, jmleenz said:
Back on the topic of a comp'd X-five. Turns out I'm building one!
I sent my factory x-five bull barrel off for quad laser barrel porting. They line the 4 ports up with the factory lightening cuts in the top of the slide so no other modification is needed. I'm very curious how effective the ports will be. Talking to another guy that had only 2 ports done on his x-five...he was very pleased how flat it was. The main benefit of this package is reliability (no comp to effect cycling) and the ability to tune the gun with 1911 springs.
Where are you sending it off to and what's cost? I'm considering this as well, but would probably want to get another x5 barrel for stock.
-
1 hour ago, shred said:
Most Production pads will also hit the magwell. You need a pretty good bevel on top to clear it.
FWIW, there's a Shockbottle pad that does, the TF-LFMW, but if you're used to the Hennings, there's nothing wrong with those either.
Great thanks! I've heard of the Shockbottle, so I'll definitely check those out.
-
I came across a CA compliant LF 40s&w full size mag that I got as for use as a barney mag, however, the mag wont seat correctly. I am running a Henning Magwell, so stock baseplates wont work.
Would I be fine with one of Henning's production basepads, or should I get one of his CA compliant 141mm base pads? this would be strictly a barney mag or on the less occasion used for IDPA.
-
7 hours ago, Dave773 said:
Omg I wish I knew about these earlier! How are they? Would they fit the 140mm Guage?
I like them and have been durable for me. Arrendondo is known in the shooting community so IMO they should fit in the gauge. YMMV.
-
Goodness gracious that looks slick! Can you put up a photo from the rear looking through the optic?
-
Arrendondo have some polymer +5 for a good price. I have a few for my M&P 9c 1.0 and they have been working well.
-
14 hours ago, gnappi said:
Pippu, funny you should mention the Beretta Ghost. I have two a 92 and 96 Brig and I thought about them both when putting this one together.
Chubbs, I have an older Tanfo 10mm compact and I discovered that the older base pads can be modified to work with the magwell and still work for the standard frame. They take about 20 minutes with a Dremel to mod. I'll get some proper pads at some point but putting this together made me able to push that expenditure out a few months.
Pic below.
Awesome thanks! I have the Limited 40 HC and found that the mags would not release fully with the stock magwell 100% of the time (using Henning pads). A friend let me use his Henning Magwell and I have no problems now.
-
Talon Grip tape, Henning +6 extensions and grams followers. pair it up with a RHT holster and you are set for a while unless you decide to mess with trigger/different optic.
Who runs a battle belt?
in Gear & Accessories
Posted
Anyone on here run a battle belt for competition? Thoughts? If you have run a competition belt before, what would be your final thoughts?
(my apologies if this topic has been brought up before)