GJ710

That explains all the black crap that accumulated on my DPP glass on the legion. Had to scrub for a while to get it out. Never happened with my older X5s. About 3k through my legion so far.

Has this happened to anyone? Screw above extractor spring that mounts the rear sight plate seemed to have loosen. Head of extractor pin is now blocked by loosened screw. The extractor spring still has enough clearance to move but when trying to pull the whole pin/spring out, the metal piece in the front that sits behind the extractor will get stuck when the front of the pin reaches the rear sight plate screw. I have a springer mounting plate on top with a Leupold DPP. If anyone can help, would be much appreciated.

.375" w/full size compliant 10rnd or 17rnd mags will be optimal to run with the magwell in ESP. I checked in multiple IDPA club boxes with my rear sight jacked all the way up and it fits. Just make sure you choose the correct square or round retainer plate tab and also select X5 magwell.

Am I the only one crazy running an 11lb spring? Gun is broken in and has a few thousand rounds through it. Only shot about 300 rounds in the 11lb spring training and a USPSA match. 0 malfunctions. Tried 14 and still thought it was oversprung, same with 13#. Just hope the slide isn't battering the frame. Shoots very flat. Using freedom 124gr. Their power factor is in the 130+ for the most part.

I'm lefty. After time it seems like it breaks in and gets easier. To help, I break my grip to hit the mag release then quickly place my thumb on the slide lock lever. Then insert the mag fairly hard to use that inertia to force the slide release against my thumb at the same time pressing on the slide release since it's already there. Takes little effort with your thumb when doing that. Works like a charm but takes dry fire practice to burn it in your head to do it naturally lol.

Was that recommendation for a specific load? Or factory loads?

Was about to do the same but have no idea which spring to get. Do you know how many lbs the weight of the stock spring is? Or which 1911 spring weight is closest to the function of the stock spring/guide rod? That way I know which springs are lighter.

Same here haha. I know a few ppl that have done it. If not, springer precision has adapters and you can go Deltapoint Pro or something.

Buy an RX or other P320 variant that comes w/the Romeo1. Then sell the gun lol. J/k. ?

Be careful shooting your lighter loads if the gun isn't broken in. I got a kaboom followed by consecutive stove pipes and misfeeds. I sent mine back to Sig. They said they did a courtesy relief of the pretension and sent it back. Only shot a few mags but it seems fine now. If you notice when the slide is slightly out of battery and you press the trigger, it forces the slide closed and feels like an engaged trigger. I think that's how I got my kaboom. Maybe the striker hits the primer and ignites a split second before the round is completely in the chamber. You can see where some of the gasses busted out the side towards the rear of my spent casing. Thankfully no damage was done to the gun or my face/hand. Just some shockwave to my face lol.

Anyone know what the bolt pattern for mounting an optic on it is? Are there any adapters to put other glass on it? Doesn't fit DAA magnetic insert for full size P320, too loose side to side. DAA said they won't have inserts available for racemaster or alphaX holster until they are able to get a P320 X5 from Sig sent to Holland.

I emailed Bladetech if they can make one and they said 3-4 day lead time.

Yea. I want to keep it and try to break it in but I can't possibly shoot the gun when after every round I have to check to see if the slide made it in to battery. For the striker to be able to hit the primer when out of battery also seems like a safety issue. I will see what Sig says.

Kaboom from my X5. 20 rounds, 9 stovepipes, 1 kaboom, 1 Failure to feed nose high. Anyone that has one have any problems? Is your lockup extremely tight like mine? Factory works fine, soft shooting loads not enough to cycle the gun properly. At least the first day which was only 20 rounds. Put another 20 through of various loads and worked. It risking though, calling Sig tomorrow.

It came with bird poop though. I hope it makes me faster. Lol

Came in today. Can't wait to play.....

This should give you more hope, Sig Pro Shop just called me today asking for payment of an X5 that is ready to ship. Got an email right back with FedEx tracking, ETA Thursday 4/13. And I'm a nobody so they should start showing up everywhere else soon. Lol.