ekraus

I am interested in a stock PPQ Q5 Blue stock trigger.

Since on the SIG forum they delete all my reply's or posts I ask it here. What is the value of a early (with proof marks) West German P226, folded slide in excellent condition. Without the original grips or sights?

Can I mount an SRO on a Pro Core 1.0 with plate #1 ?

I have Hornady 9MM seating with miceorojust stem but it only works with RN doesn't like FP. I need a 45ACP solution. I like the Dillon because you can flip it over for RN or SWC. The hot glue seems to have worked so far. Its still a PIA.

Well after all these years and not wanting to but another micrometer adjustable seating die. I finally took my 45 Seating Die put a Hornady SureLock lock ring on it and Hot glued the edge of it to the tool head. Reason being. I just started loading 45 ACP again and have all kinds of bullets. Each requires and different OAL. The dillon die is a PIA to adjust. So gluing it down the lock ring allows me to loosen the allen screw and use my wrench to do slight adjustments based on the bullet I am seating without the lock ring coming loose. So if someone has any other ideas I am open to them.

My mistake not checking the OAL when using the new box of bullets. But What bugs me is I wonder if the Dillon seater is more accurate from RND to RND. There were several in the 200 I loaded the were in the neighborhood of 1.150, that's what led me to believe that ogive was different on the new batch of bullets. The thing is I am relatively sure the molds for the most bullets aren't super precision. You can't expect precision when you are paying less then a dime per head when bullets for BR can cost a buck each. But I am still wondering about the Dillon die. I was thinking about getting the Whidden Click Adjust lock ring, but its huge and may not work in the 750 tool head. Or maybe the one of the other clamp style rings. Easier then having to use 2 wrenches to snug the die down. The real problem is with loading different bullet weights and manufactures made me go with the Micro adjust die.

Before I started shooting a PPQ SF and was shooting a P320 bullet, OAL wasn't much of an issue it ate anything. I had an issue at a match yesterday where the RNDS were jaming in the mag. I went to a practice bay and noticed the RNDS were getting stuck on the ramp and in some cases were getting stuck in the mag. I am running Xtreme 135 RNFP 3.5g N320 at 1.150. They appeared to be to long. I checked 10 RNDS and there was a spread of .009. I am using a Hornady seating die with a micrometer (using it because of the ease of using different bullets). I stooped using the Dillon seater because its a PIA to set. The nice thing about the Dillon die is the the flip seating stem for different profile bullets. So I figure it could be several things giving the inconstancy. Seating Stem , inconstant shell plate machining, loose shell plate (I have it tight), inconstant bullet profiles. Or maybe me not going through the full stroke. I am leaning towards the inconstant bullet profiles. Looking for some other possible issues.

am having an issue with the Walther Q5 Oval Mag Release Button. I cant seem to get it to stay in one place. No matter how tight the screw is, and I don't want to strip the head. I am afraid to put locktite on the bottom of the button thinking I will never get it off again. There are no serrations on the mating surfaces to stop movement, the surfaces are super smooth. Looking for some ideas to get a tighter fit.

Looking for a review of McJ Tools Reloading Die Lock Rings.

Just used up a box of primers and was looking through my stock to use the oldest first and found 7K of Winchester SPP that I didn't date when I bought the. I managed to get Federal, CCU and Remington to give me the dates of manufacture. But Winchester said "there is no shelf life and the manufacture dates are propriety". That's bad karma! Makes me not want to ever buy there components again. Anyway here are the Lot 3's RDL070G RBL030G RBL070G

Thanks will do.

So if I want to change the wording of a classified like price I have to email and admin? Why cant you delete a classified?

So I cant edit or delete a post in the classifieds. As well if I request support I get. "The page you are trying to access is not available for your account." So how do I use the forum?

Yes, send it and they will mount it.

I guess I got a message from Scott. He said that they cut a deep pocket and move the optic forward of the hammer channel and the the locator tabs are not necessary because of the deep pocket. No I need to figure out if I want to go with a 3MOA or 6MOA sight. The 6MOA is really bright and if the 3MOA probably as bright. Probably start another topic.