[Glock 26 in IDPA Bug division]

I believe the Magpul 12 round mags keep you in compliance. They have a slightly shorter extension.

[NORMA 9MM BRASS]

I just encountered the Norma brass with small flash hole. What a pain. I toss every one I see now.

[mag springs for P320]

I got some of these. They seem to work fine.

 

https://www.ebay.com/itm/Replacement-Sig-Sauer-P250-9MM-Magazine-Spring-2-Pack-Mag-Springs/273612469536?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 

[Trijicon Fiber Optic Sights]

I've had Dawsons on most of my other pistols, and like them a lot. That's what I decided to order for the P320.

[Trijicon Fiber Optic Sights]

Anyone using the Trijicon fiber optic sights on their P320?
https://www.trijicon.com/na_en/produ...uct1.php?id=FS

[P320 X Five and releasing the striker out of battery]

Is this just a 9mm problem, or has this been reported with other calibers?

[P320 X Five and releasing the striker out of battery]

My  P320 .40 caliber doesn’t have nearly as much case exposed as that. Mine is the standard full size model.

[Had a little trouble with my Gray Guns comp trigger kit]

It sounds like a fairly significant improvement. It might be worth having a spare if they would sell you one in case you break another.

[Had a little trouble with my Gray Guns comp trigger kit]

How much difference in trigger pull weight does that spring make vs stock?

[P320 production mag pouches]

I used the Beretta spacers in my CR Speed pouches for the P320, and don't have any wiggle. They space the side as well as the back.

[magpul glock mags]

Sent!

[XDm Bitone Wear]

I've used my XDm Bitone for about a year, with quite a bit of draw/dry fire practice out of a Bladetech with no signs of holster wear.

[Using 16-lb Recoil Spring in XDM .40 S&W]

I used a 16# spring, and stock firing pin spring with 122 PF loads for the Big Dawg Steel match with no problems in my XDM 40.

[Odd SW M&P issues.]

I had a problem with my M&P 9mm failing to extract causing jams like you mentioned. I was told by one of the Team S&W guys that a few of these guns got Melonite overspray in the chambers causing the chamber to be a little rough. I polished my chamber and the problem went away.

[Dawson ICE]

I've installed 2 Ice magwells without modification to the frames. On one I did need to file a little material from the brass inset though. The mags with Arredondo pads seat easily.

[Single Stack Grips]

Smith and Alexander for me.

[Prayers needed for (Mad Scientist aka Glock Jockey) John Nagel]

That's horrible news. I'll be praying for those boys.

[Mec-Gar magazines]

I had the same problem. I gave up and glued the base pad on with 3M moulding and trim adhesive that I got at an auto parts store.

[Glock G35 Holster]

Nothing but Bladetech for me.

[Glock Base pads]

I've found that my mags that use the #5 followers will hold a reloadable 20 rounds, but the ones with the #6 followers won't. The followers are not interchangable so the mag bodies are different.

[Mag well for Arrendondo pads for a G35?]

My Dawson Ice and Arredondo's play nice together.

[2007 Iowa Section]

I'm Shooting Friday.

[Picking Up Mags From A Table]

I had problems with that stage at the Single Stack Nationals last year. My plan was to put the mags back in the pouches, then shoot the stage. When i tried to shove the first mag in to the blade-tech pouch the top round slid forward and things went down hill from there. I ended up shooting the stage strong hand while holding the rest of the mags. I actually shot the stage pretty good that way once I got going. I have since beveled the openings of my blade-tech pouches which might help if I try that stunt again.

[Anybody Use Mag Slick?]

I use it and like it.

[Single Stack, Live Or Die?]

So far Area 3 has 105 entries and only 4 are Single Stack division entries. It's still over a month and a half away so more will probably register. I would like to see a strong showing for that division.