Darianis
-
Posts
140 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Darianis
-
-
I recently laid down my bike and as a result I have a dent in my tank. it's about 1.5 inches wide and 4 inckes long, something like .75 to 1.25 inches deep. the dent is along a complex curve of the tank.
Now I want to repair it, and thought that bondo filler would be the best option, but I have no experience with it. as I understand it you sand the area to be repaired doen to bare metal, clean it throughly then apply bondo and sand smoth and then paint. The filler is the consistance of penut butter? or more like paydogh.
is there any more to it than that or are there any pitfalls I need to be aware of before I start. I don't want to get half way through and realise I should have done something differant and then have to start over heh.
Thanks
Tony
-
We sent off Erik's app today hope he will be able to attend. Although it will mean a lot of time on the reloading press :-)
-
I just bought a slide and bbl from a fellow BE member but when I ordered the rest of the parts to complete the top end I ran into a problem. Shooters connection(where I get all my retail gun parts) only had 5" reverse plugs. I called them and asked them what I should do and they didn't have a ready answer(the first time that has ever happened :-). So my question to you all is what do I do to make this work. The bbl is a little over 4.5". is there a place I can order one or will I have to get my smith to turn one down?
Thanks for any info
Tony
Worry not I found one. my googleFU was weak but I looked at Brownell's and found a bevy of em.
Nothing to see here move along
-
I'm looking for a fairly inexpencive notebook equiped with media center so that I can use it as a portable and as a media pc. Would like for it to have a tuner card also but that's not a deal breaker. Idealy I would be able to store programs on it and take it to friends homes and watch them there. I don't know if this is even feasable. I'm on something of a bugdet so it would have to be relitivly cheap ie under 1k... way under would be better but I don't think I'll be able to get the feathures I want for much less.
Thanks
Tony
-
I'm glad this is happining now. With all the gun debates going on it's good to see public officials standing up.
You could call it the Atlanta version of "High Noon."Top city officials will announce Tuesday that despite a new state gun law that went into effect at midnight, they will have anyone carrying a weapon at Hartsfield-Jackson International Airport arrested. The state lawmaker who sponsored the new gun law says if they do, the city will immediately be sued. And state Rep. Tim Bearden (R-Villa Rica) said the plaintiff in the lawsuit could be himself.
"I have a permit, and I have family I have to pick up at the airport tomorrow [Tuesday]," Bearden told The Atlanta Journal-Constitution on Monday. "I'll have one [a concealed weapon] with me at all times."
Airport General Manager Ben DeCosta said if Bearden shows up at the world's busiest airport with a gun, he'll be busted.
"I can identify him, and I'll have him arrested," DeCosta said Monday. "We're not fooling around. This is a post-terrorism environment."
The new law, which Bearden sponsored, permits licensed gun owners to carry concealed firearms in parks, on public transportation and in restaurants that serve liquor. The law takes effect Tuesday.
Firearms proponents hailed the law as a victory for the Second Amendment to the U.S. Constitution. They say law-abiding citizens with the appropriate permits should be allowed to carry firearms in formerly forbidden areas for self-protection.
Before the new law was passed, Georgia law banned guns from venues like public transportation and restaurants serving alcohol. More than 40 other states permit guns on public transportation, Bearden said, and 37 allow permit holders to carry weapons into restaurants.
"I was in law enforcement for 15 years," Bearden said as the bill awaited the governor's signature two months ago. "I never rode up on a shooting in progress. I don't like the idea of the police telling you, 'Get mugged, get raped, get murdered. We'll come by, take the report, or send flowers.' That's the wrong message."
Opponents, however, blasted the proposal, saying it has the potential to spark more violence than it stops. DeCosta wrote to Gov. Sonny Perdue asking him to veto the bill, and Mayor Shirley Franklin and MARTA officials publicly lambasted the idea. MARTA bus drivers gathered more than 1,000 signatures on petitions demanding bulletproof shields.
Federal law already bans guns past the security checkpoints at U.S. airports. The new state law, however, apparently would permit guns to be carried on the non-secure side of Hartsfield-Jackson by people who have gone through a background check and have been certified to carry a weapon. Licensed gun owners would be permitted to carry weapons on public transportation coming into the airport, its lobby and in restaurants outside the security checkpoints.
DeCosta said he will use the first day the new law takes effect to declare Hartsfield-Jackson a "gun-free" zone.
"We're going to make it clear that the law does not make any allowance for guns at the airport," DeCosta said. "Guns are not appropriate for any airport in Georgia."
He and Franklin plan a 10 a.m. news conference to discuss the new gun law.
Bearden said the new law clearly permits guns in some areas of the airport.
"They are not appropriate once you go past security," he said. "But in parking lots or restaurants or public transportation, they are OK."
The state lawmaker said the city does not have the authority to defy a state law, and if they make arrests they will end up in court.
DeCosta said city officials will not back down from their position on the new law and again vowed to have Bearden or anyone else carrying a gun on airport property arrested.
"He can then have all the NRA [National Rifle Association] lawyers say why it's OK for him to bring a gun to the airport," DeCosta said.
MARTA, meanwhile, released a statement late Monday noting that state law prohibits firearms on public transit unless the carrier has a valid license to carry a gun.
"This license must be carried at any time that an individual is carrying a firearm on MARTA," the statement said.
-
one stupid law down several million more to go, But it is finally heading in the right direction again!
-
Thanks for all the positive feedback I let the boy read it and he thanks you too
-
I have a problem and I can't seem to figure it out. I am using firefox on a WinXP Pro box and I can't get to the midway site. I also can't ping or tracert www.midwayusa.com. But if I go to a web based proxy server boom no problems. What am I doing wrong on my end, or better yet how do I fix it?
Thanks
-
had some trouble with the vid but this stage turned out great. He ran it slow and steady and got great hits. He had 2 C's and one D. The rest were all A's! That's my boy!!
-
He shot a great match. He was very safe and had great gun handling skills. His trigger work still needs some work but that will come with more practicing. He told me after his first stage taht he was a bit nervous and had a case of the jitters heh. He wanted to know when that stops ... I told him When it does I'll stop competing hehehe. Over all totally positive match and I can't wait till next month.
I'll have the vid soon my buddy is pulling it now. I'll post when I get it.
-
I don't know who is more excited me or him :-) He is 13 and about to shoot his 1st USPSA match. He has been practicing as much as his mom will let him. He will be shooting an M&P 40 in limited. Everyone wish him luck. I'll post his results tomorrow.
-
I have a Sony Dav-DX255 system at the moment. But I'm planning on getting a HDdvd player soon. I have dish network. My amp doesn't have digital audio inputs. I need some ideas on a decent, but cheap amp that will let me use my existing speakers and will have all the inputs I need for the HDdvd player and my dish HD system.
Any ideas?
Thanks
-
haven't tracked down the SN yet but the most destingushing feature was that it was build on an STI aliminum tatical frame. It has an accessory rail. Not many of them out there
-
Had my house broken into tonight and the only thing missing that I can find is my Open gun. It's and STI with a Springfield upper in 38 super c-more serendipity. Don't have any pics unfortunately cause I just got it back from the gunsmith
What really sucks is that I close on my house tomorrow and would have been moved next week. and as such the house is totally trashed so there may be other stuff missing that I haven't found out about yet
if anyone sees an open gun that looks like this please call the police
-
Thanks for the info. I figured it out. It turn out that the DVD player was set to display at 4:3 I found this and changed it to 16:9 and all is good.
WOW HDTV is so much cooler than normal
-
I have a Sony Wega 50" tv it's widescreen but I still see the black bars on the top and bottom when I watch DVD's anyone know what I'm doing wrong? The guide
I have tried all 4 screen modes but no dice. it must be a setting or something right?
-
Just wanted to post and let you all know what’s cooking this weekend.
The menu is going to be BBQ pork & chicken, fried catfish & hushpuppies, spicy chili. With coleslaw and potato salad for sides.
The price will be free for RO’s, $7 for everyone else and kids under 12 eat free.
-
Wow what a motley gang But grtas on a great match and a great top 5 team finish. maybe next time you can get all your gear running good from the start and win.
-
-
I recently cut down my bbl on my 1100 and I need to get rem chokes installed but I don't know anyone in this area that has the dies to do this. Anyone know someone that can?
-
I bought a C-more Serendipity from a friend but he doesn't have the mounting screws. Where can I get a set of replacements?
-
gonna have to link this in the open gun tech forum... maybe they know something we don't
-
While surfing eBay tonight I saw this add for a comped 38 super top end. Hmm could be intresting so I took a look. I now invite you to do the same.
-
Ok I have to ask it. Who are you and what have you done with our AFT agents?
Bondo experts please read
in Miscellaneous Topics That Do Not Fit in Any Other Forum
Posted · Edited by Darianis
Yea that's basically waht iwas thinking... I'm not really looking to make it show quality or anything heh... hell I'm just gonna rattle can paint it and prolly let the hids do some silly graphics or sometihng. haven't really decided.
Thanks for the info
Is bondo the best material for this type of repair. I only ask cause I have never done it and have no information heh just only heard of bondo heh.