Doctor

thanks to both of you

i have 100gr lead bullets i bought from Billy's bulllets,coated with moly 3.6 gr of power pistol will be my starting load. Do lead bullets require different loads than jacketed projectiles? are minimum and maximul loads different than other 100gr projectiles?

red dot in the loading manual

i cant find anyone online and Bruno's in phoenix does not have any

thanks

power piistol has 4.8 grains listed for 110 gr bullets how much lower is reasonable for a load for 100 grain bullets?

I have 148gr wadcutters and 135 grain moly coated lead bullets. I want to practice shooting with my new lcrx and i was wondering what the lower loads of power pistol should weigh for plinking at the range?

i wan to reload and practice using this new firearm i just bought. What bullets and weights are suggested to reload for practicing?

thanks

Thank you

i shoot silohuette. My Ram loads are 169 grain barnes with 41.5 gr of 4350 the extruded powder in my rcbs powder dump does not meter regularly and i have not been weighing each round. The powder charge can vary by half grain or so. The real experienced shooters ( i am not) were zeroing my rifle and they figured the varied weight of powder would not allow it to zero at the 500m mark on a regular basis. What kind of error am i introducing by being off a half grain or so at 500meters?

thanks that worked and i found what i needed

on this forum and rifle reloading i am searching for a diagram that someone sent to me that was very helpful

thank you i do almost all rifle reloading and i was not familiar with all of these companies i ordered them from xtreme Geoffry Radoff, M.D.

i want to practice with my sig 238 but i cant find bullets to load anyone know where i might find them?

thanks the jbm computer is helpful

I shoot cowboy lever action silohuette. One of our events uses 30 30 rifles and i have good zeros at 2100 fps with sierra 125gr bullets with 26.2 h 322. I would like opinions if i change the bullets to 150 gr and use another powder, 4064 imr loaded at 2100fps,will the zero be fairly close under the same weather conditions?

Thanks

thanks for the replies i am new to reloading why did the lee die set come with a crimping die?

do you need to crimp the 708 brass? i am reloading 4064 36.4 grains, 168 gr bullets?

i want to get a custom grip engraved with script or a logo who can be recommended?

i tried putting a very small bell on the brass with 115 gr hornady bullets and 5.2 grains of power pistol they all shot well, no feeding problems in a baby desert eagle. Why is it usual to crimp the brass i did not chamfer the brass either, but could this be done and not lower accuracy and not crimp?

thanks

I shoot smallbore 22 silohuette with a Leupold vx3 target dot scope. I recently started doing this kind of shooting and like almost all of the other shooters( except some of the masters) is there any device or computer program that can, with a camera if necessary, show your wobble over a time period? a few shooters have a pattern to their wobble. I don't seem to but i would like to view it on a video anyone have any suggestions?

suggestions for the powder and load?