CAGLS

I'm doing a similar build with my 75B SA frame and a TS slide with the CTS rollmark. It's currently at CZC having the slide CNC machined to be fitted to that frame. So I would need the threaded Czechmate barrel and Czechmate comp.

Is there an adapter being made for the LPA dove tail to mount the Leupould Delta point that the CZ Tactical sports or Shadow target slide have?

Yeah noticed that as well. If a buyer could convince them that a CA buyer could dros the frame as a TS. I'm not sure what has to be done to the comp in relation to the barrel since if it is permanently attached to the barrel how can it be disassembled for cleaning. Also limit the mags to 10rds, and ship the rest directly to the buyer. Although a CA buyer will need to get a non threaded TS barrel for safe handling demo purposes.

Do you have the slide mounting milling program for the Tactical Sport slide? But first I want to see the setback lower profile mount you were going to make. I think I will just order the P-07 suppressor sights for BUIS. I would want to have dove tail cut to mount the rear sight in front of the Delta point along with the taller front black suppressor sight.

I haven't had any success getting them to respond to my email purchase inquiries to buy their long slides. I've emailed them at least 3 times.

kneelingatlas, so to attach the comp you had to thread your barrel. I'd like to add that to my TS/ SP-01 Shadow frame gun but I had the Accu bushing installed so I'm not sure if it would work still. I'm going to have to ask Stuart if it will. Also since your in CA like me isn't a threaded barrel not legal to possess or is it ok to have my own barrel threaded?

Yeah, I've experienced that too with David. Both are exceptional in cs.

Can't wait to see how much lower profile you can get it setting it back.

Do yourself a favor and get a starter punch, those hammer pins are staked in and you'll break normal pin punches. The one CGW sells is good.

Hey CZC said they were too busy building new CTS's to mill the slide for a direct mount for me.

CZ85Combat, I posted the exact pic of your gun as visual example on post #49.

So you think with the DP it won't hinder lowering the hammer by hand? Also instead of rear irons a center notch can be laser etched into the body of the DP at the rear and the proper height front sight to line up as BUIS. It would make it more difficult, especially if you have large hands. You might have to pinch the hammer from the sides. In order to lower the profile of the adapter and moving the footprint back do you think it would overhang over the hammer? Just eyeballing it doesn't seem it would. I wear an XL in gloves but I think I can manage, that's how I lower the hammer now by pinching the sides.

Here's a better side profile view:

No it does not cover the extractor pin access hole. If I have the slide milled and machine a dove tail to mount a rear iron sight then it may be right on top of that.

So you think with the DP it won't hinder lowering the hammer by hand? Also instead of rear irons a center notch can be laser etched into the body of the DP at the rear and the proper height front sight to line up as BUIS.