3guns
-
Posts
127 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by 3guns
-
-
I would recommend going g with the Legion. It gives you the most flexibility to do whatever you want with the pistol. You can make upgrades as needed.
-
On 1/14/2023 at 11:10 PM, jpm2953 said:
11.5 from Cajun
Agreed. You can ignite all primers with this hammer spring.
-
The factory Shadow 2 Optics ready slide will not have the rear serrations.
-
Where can I find the latest Mid-Atlantic Multigun Rules?
-
On 2/21/2021 at 1:04 PM, Sigarmsp226 said:
Broom - I thought (correct me if I am wrong) that once a piece of brass is swaged it did not have to be swaged again...Is this wrong? If so please let me know
You are correct. Once swaged you don't have to do it again.
-
On 1/11/2021 at 12:44 AM, ysrracer said:
Rather than sit in the house and listen to my wife bitch at me, I would go into the garage and load for a few hours.
You should get a single stage press instead.
-
There is only one USPSA Multigun match that is popular. Multigun Nationals.
I'll post up chrono data, next time I go out to the range.
-
So I loaded up the 34gr bullets with 21gr of H335. The bullets grouped within an inch at 50yds with almost zero recoil. I had to open up my adjustable gas block by half a turn so the rifle could cycle.
My spare 3 gun rifle with a fixed adjustable gas block would not cycle the rifle. Overall I’m impressed with the lack of recoil of the round. I will definitely use this round in 3 gun matches for bay stages. Next step is to Chrono the round.
-
Does any have any starting load for .223 34 gr Nosler bullets? I got a good deal on the bullets and I'm looking to reload for bay type 3 gun stages.
There is plenty of load info for prairiedog hunting with high velocity, but I'm trying the velocity bring it down a little.
I primarily use H335 or TAC. Any info would be appreciated.
-
This was my chrono data using CFE, Sig 320 X5, OAL 1.14, Blue bullets 125gn, Fed primers
-
On 7/30/2019 at 7:49 AM, AZ123456 said:
Is this with the truncated cone 125's? TIA
Round nose 125gr
-
5 hours ago, CTJer said:
.355 blues?
Yes
-
On 3/27/2019 at 8:15 AM, CTJer said:
Would I be better served to pick up a new barrel?
KKM?
Note: I’ve run these loads through a CZ Shadow 2 and the group is about 2” at 20yds. (6-8” with gen 4 G17)
I run a KKM barrel and I can shoot 2" groups at 25 yds using 147 gr Blue Bullets
-
Thanks for the data
-
+1 Blue Bullets
-
On 9/15/2018 at 10:31 AM, Bummy425 said:
Use the rubber band...
Sent from my Moto G (5) Plus using Tapatalk
I know that it's an old post, but I just got my MR Bullet feeder and used the rubber band. It works.
-
If you buy from Safariland use promo code: springvip for 40% off
-
If you like to use Varget, you can polish the inside of your powder measure and it should provide more consistency. I tried it using with RL-15 and it increased consistency to acceptable levels on my 550.
-
Thanks, it seems that it's a good powder, bullet pistol combination for you. I will definitely try it out
-
On 12/19/2017 at 8:40 PM, Howa4au said:
About round number 80 through my new X5:
The same thing happened to me a year or so ago and left my brass looking like this. I thought that it was my ammo, but I'm now having second thoughts.
-
On 3/14/2019 at 6:09 PM, chetc said:
thanks for the tip on the sport pistol, 3.3 with the 147 coated truncated cone bullet works great, i will attach target later
chet
At what distance did you shoot that group? I'm also thinking of trying Sport Pistol and the group is pretty convincing.
-
Call Dillon to place your order. They will let you know what you need.
-
Thanks for the info
-
Does anyone run one of these scopes for 3 gun? If so what are your thoughts? Pros? Cons? How is the eye relief? Thanks in advanced for any input.
Shadow 2 optics ready
in CZ
Posted
Nice! I wish I had a new model.