[What to eat & drink]

Monster and whatever junk I decide to get from the gas station.

[Must you remove the comp every time you clean your Open Glock?]

Slide racker yes but not the comp. You just clean the barrel while still in the slide. You can maneuver the barrel within the slide to get a pretty good cleaning.

[WHERE IS ALL THE POWDER]

powdervalleyinc.com

[Acurate #7 for 9mm]

Trade it. where are you located?

[SVI Mags in a STI gun]

MBX Mags

[SVI Mags in a STI gun]

think I need to get hold of some older SV mags then

Just hold off a little while. New mags are coming out soon. 30rd big stick $160 complete

[38 super feed issues]

It's that big ass rim on the end of the cartridge causing all the trouble.

[Switch from zero JHP to coated BBI]

4.5 gr of n320 with a 180 bayou(same coating as BBI) @ 1.185 was 169pf out of my 5" limited

[STI Edge 9mm]

Do a search on here for tight group and 124's. You will find more than you ever wanted. I don't use TG or I'd just pass along my load info.

[STI Edge 9mm]

What powders do you have?

[Precision Delta and Lost Shipment?]

It's the holidays and weather could be bad. I've had a few shipping delays in the past few weeks.

[Best Powder for open 2011 with comp]

3n38 with coated lead easily makes major.

[170 & 140 mm mag capacity]

9mm

170 STI with grams guts and grams 4mm pad= 29+1 Dawson pad gave me one less

New 170 SVI with Taran guts and taran 3g pad = 30+1

[Were to buy C-More batteries in a rush?]

+1 for stacking two 357's.

[premade or build open comp]

Get a matchmaster in 9mm if you want the look of the steelmaster.

[9MM MAJOR FLAT]

HS-6 will work great in that setup. I shot one with a similar setup and the guy was using HS-6 with a 115.

[What guts and floor plate for my SV mags]

TTI guts and pads. The pads are easy to take off and less bulky than the dawsons. I get 21+1 in sti tubes.

[Deltapoint part deux!]

March 2015

[Dawson SNL +1 basepads]

I must be lucky. I bought 3 new mag bodies and used taran pads and guts. All three will get 21.

[Dot glass size]

I'm new to the open game. Is 6 moa a good place to start?

yes

[Installing Carver comp]

There's no need to remove the comp again unless you are going to replace it. You and move the barrel around in the slide enough to get everything clean.

[Stock 2 Essentials]

Thanks for the replies. This gives me a whole lot better idea on what to get.

[Stock 2 Essentials]

Is the one piece sear a factory part? Also, what's involved in fitting the EG hammer? Thanks for all the help so far.

[Stock 2 Essentials]

I've done a bit of searching and seem to get mixed answers. I just got a 9mm stock 2 and was curious what you guys feel the essentials are. I'm new to the Tanfoglio thing.

What weight recoil spring?

Hammer spring?

Grips?

Front sight?

ect

Any help will be appreciated.

[EG grip trade]

I may be interested in buying the grips if you decide to just sell.