Jump to content
Brian Enos's Forums... Maku mozo!

Pinkerton

Classified
 View Profile  See their activity

  • Posts

    43

  • Joined

  • Last visited

 Content Type 

Posts posted by Pinkerton

    relaoding .300 WIN Mag on XL650

    in Miscellaneous BEginners

    Posted

    I have the same problem. The only solution I have found is to set the die as high as possible and the internal seater aslow as possible but I still have to remove the cartridge from the press....

    Pinkerton OUT!

    Has anyone reloaded the .300 WIN Mag on the XL650 using a Redding competition seating die?

    If so, I would greatly appreciate your advice as to how you set-up the seating die. When I lower the turret after seating the bullet it begins to turn before the case w/seated bullet is clear of the seating die - which results in jammed cartridge between the seating die and the shell plate.

    Thanks!

    Rocky Mountain Arms Practical Trainer

    in Rifle - Technical

    Posted

    Can anyone tell me something about a Rocky Mountain Arms Practical Trainer, a carbine.

    I stopped by my dealer to buy some powder. He had this used rifle sitting in the rack. Did an Internet search and came up with the a Bear Coating outfit but no info on the carbine.

    That is the same company. He used to make the "Patriot" ar15 pistol but the ASSault weapon debacal stopped his production. I would email him on specs etc.

    Trying to determine how much these rifles originally sold for? And an other info....

    WTK 10mm problem/question

    in 10mm/40 Caliber

    Posted

    300lbgorilla The issue is it's an Open bolt with Advanced Primer Ignition so the bolt is never truelly closed. I think a stronger spring might make the bolt faster on closing so it would be "more closed" Thanks for the idea.

    The guy I bought this from told me that he has had none of these problems with the other kits he's sold to other guys.

    WTK 10mm problem/question

    in 10mm/40 Caliber

    Posted

    Shred. No it's not a 40 Short and Weak barrel.

    Joe Law 99 The primers are center hit and the ones that are still in the cases show serious over pressure signes.

    Skywalker I think you're right I just figured that the open bolt would relieve that pressure. (on ther seperated cases the primer is still in the csae) That and I've run HOT 9mm through the 9mm set up with only a rate of fire increase. I'll give the crono a try.

    WTK 10mm problem/question

    in 10mm/40 Caliber

    Posted

    Hi,

    I have a 10mm load that I have used in my Delta with no pressure signs. It's a relitively lite load.

    OK so here is the problem.

    I have a Open bolt UZI. It fires Federal red box but blows the primers out. Wierd because I seem to remember that Federal is a lite load.

    When I use my Reloads with new bress I get case seperations. Scary!!

    The same batch of my loads rounds in my Delta are fine. No pressure signs/ no case seperations infact they seem lite.

    The Federal I sent back to Federal and they said that they were fine and at about 1050 fps. (well within spec)

    The guy that did the bolt and barrel says that they are both in spec and run fine in his with UMC 10mm.

    I haven't been able to get UMC 10mm locally.

    What would cause these issues?

    Any help or guidence would be appreciated.

    Thank You,

    Pinkerton OUT!

    Armscor Brass

    in General Reloading

    Posted

    Hi,

    I just wanted to thank Ivan. Today UPS dropped off a 1K 9mm brass from Armscor. I has Emailed Ivan about some problems I'd had previously with the brass.

    Thank You again I'll load this up and I'm sure the problems have been fixed.

    Pinkerton OUT!

    WTK: Info on Benelli

    in Shotgun - Technical

    Posted

    Hi,

    I fell into an unbelievable deal on a super 90.

    It came with a sure fire light, a duck bill with a front rifle nite site, pistol grip stock and a plus three extension.

    I think the first thing I'm going to do is get a ghost ring tapped and a higher front rifle site.

    What else? I understand that a side saddle makes it unreliable?!?!

    I had been putting to gether an 870 but I think it will go up for sale.

    Thanks for the help on the 870 and for the help on this one!!!

    Pinkerton OUT!

    WTK load for a 1/7 twist 8in AR Barrel

    in Rifle/Shotgun

    Posted

    The upper has a silencer on it.

    I'm just trying to make sure the bullet doesn't spall out of the barrel, not too much blast for the expansion chamber, and some kind of down range accuracy. It is more of a CQB but having the ability to do something at range would be nice.

    Thanks,

    Pinkerton OUT! :)

    WTK load for a 1/7 twist 8in AR Barrel

    in Rifle/Shotgun

    Posted

    Hi.

    I'm looking for a load for 223 in a 8 inch barrel that is 1/7 twist. It has to fit in an AR mag so COAL has to be about 2.270. I am hoping to streach out the range. In my 16 inch 1/8 69 SMKHPBT work great over 25.6 Gr of Varget. That is where I plan to start.

    Any and all suggestions would be appreciated.

    I am making the assumptions that a heavier bullet would give me better distance/ range. I think a faster burning powder would work better in a pistol length barrel. Does this combination cause problems?

    Thank You,

    Pinkerton OUT!

    PS I had to shelve the 25acp with 32 in barrel project

    16" or 18" barrel

    in Rifle - Technical

    Posted

    It is my understanding that in limited three gun you can use one optic on one gun. I was going to use a 1x4 on the scout rail.

    One more question is going with a heavier barrel going .970 to help or just be more cumbersome.

    My experience is with a 20" pencil barrel for duty use and a M-16 with a 7.5" for fun. This is my first "accurate" Ar15. I first thought the 16" because of manurverability and weight. Then I got worried about range.

    Thanks,

    Pinkerton OUT!

    PS It seems the more I learn the less I know.

    16" or 18" barrel

    in Rifle - Technical

    Posted

    Hi,

    I'm building a limited AR I was going to go with flat top with a scout rail. A Wilson heavy barrel 16" 1/8 with a pinned JP cooly break.

    Now I'm not sure I think maybe a 18" would be better and I keep going back and forth on 1/8 and 1/9.

    HELP!!

    300 yards is about the max around here.

    Thanks,

    Pinkerton OUT!

×
×
  • Create New...