-
Posts
28 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by jcl
-
-
It is just a general note at the bottom of the 147 gr chart. Doesn’t say anything about powder.
-
I am working on loading different weight bullets to see what my Pcc will like. I have several reloading Manuals but my Speer Manual has a note under the 147 gr. Bullet that the 147 grain is not recommend for barrels 10 in or longer, is this due to pressure or maybe velocity?
thanks in advance
-
Holy crap I have read thru this thread for the last 3 days and I have finally finished it. Now I can't remember half of it. It sucks getting old,could somebody please provide a link to which tube will work on the m3000 and also if possible a link to which rail you use to mount a optic.
Thanks CRS. (Can't remember sh##)
-
Thats sounds good, thanks Bamboo
-
I did some searching and came up with nothing, but I need some load data for my 38 super comp to shoot minor. I have HS 6, power pistol and for bullets I have 115 HAP, 125 RN and 147 RN.
Thanks Jim
-
I am having the same issue with my 38 supercomp brass also, I loaded brand new star line with no problems, but with once fired the die is not sizing. I am using the hornady LNL press. The dies are Lee Carbide 38 super auto. I have only loaded about 200 rounds with these dies. The carbide ring is there and in good shape. I hope your new die dose the trick, if so I will be ordering one
-
-
Thanks everybody for all of the great info. The guy I got this gun from was using imr4756 which is being discontinued and MG124 bullet. So now I am trying to develop a load for me. What I am trying to understand beside's the FPS is when I read all of these articles they mention 38 super auto, 38 super, 38 super+p and 38 super comp. that these all the same cartridge correct???
-
Thanks I will check out BBI and Bayou also.
-
We have a little up here in Alaska and lately it's been titegroup and a few others. Most of the time it's either Hodgdon or Accurate. Haven't seen Alliant or V V for a while though.
-
Surprisingly these berrys are coated on the bottom also, but I will stay away from them. EEH any idea where the FSP needs to be. I am asuming that the MG meets the FSP if so what grain's can I use.
Thanks
-
I am gettin ready to start reloading 38 super comp and I am confused about which bullets I can use. I some what understand about the PF for the gun, which is a caspian 38 super comp with a 3 port comp. What I am having trouble with is the FPS for the bullet. What is the minimum FSP I can shoot. For example I have some Berrys 115gn RNDS will the work or not.
Thanks in advance
Jim
-
Very nice work, I really like how it came out. Looks like the testing is going good so far also. I have the XDM in 9 and 40 and I am in the process of making the 40 into a open gun. If that mount ends up working for you I would be interested in buying one.
Thanks Jim
-
Found 2 bricks up here at 3 bears 25 a brick, I didn't think that was to bad for up here. It was any where from 13.95 to 18.95 before
-
I also get 24 with my pistol gear and they both run great.
-
I did my XDM 9, xd 40 and XDM 40. The difference is night and day the triggers on all of them are awesome.
-
I sent my caspian 38 super into Doug at accurail to have a new slide fitted, the old slide already had the accurails. So I got a call from Doug today and he asked if it was ok to lighten the back of the slide because my PF is 175 I told him to go ahead and do it. My question is with him lighten the slide by I believe .020 dose this mean that it will take less to make the slide operate and in turn I can lower how much powder I will be loading with or am I way off.
Please help this newby.
Thanks Jim
-
Ok, so no to magmun small pistol primers, thanks Sarge. As for the power factor would one of you guys happen to have a post tagged that explains how the power factor works with different primers?
Thanks
-
I bought a Caspian 38 super comp and I have a question about primers, I did some searching and I didn't see any info. I loaded the last of my brass with small rifle primers, but I am wondering if I could use small magnum pistol primers? If so would I need to change the amount of powder.
Thanks Jim
-
I have the burris on my slide and I can't stand it. It's coming off and a c more is going on with a carver mount.
-
I really like your pistol, How do you like your carver mount. I have a c more I would like to mount on my 40.
Thanks Jim
-
I would also like to have the 22 conversion, I have a 9 and 40.
-
My vote is go with a 9mm, then I can buy your 38 brass On a side note hopefully Doug will be calling me soon to send my gun back. I can't wait. I have already loaded the last of the brass I got from you and I am ready to start practicing. And I wanted to say thanks again for setting me up to shoot open.
-
Pat did that happen on saturday or sunday. Are you coming over tomorrow?
Ruger PCC load development
in 9mm/38 Caliber
Posted
Thanks for the load info stick. Right now I am using W231 and the gun seems to like it so far, but I do have some title group I might try later on.