Gary H.
-
Posts
157 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Gary H.
-
-
I'm running an exps2.0 on mine. I have the 4 or 5 other premium brand red dots on other rifles but I prefer the eotech on my PCC for size of glass/field of view and speed of target acquisition and love the dot circle for this.
-
and just to mention it, my AR15 has almost no muzzle rise compared to this and I can double tape with it a whole lot more efficiently. And the 40 yards is not something I work on. It was just at the range we were messing with things at the last time we shot.
-
I just checked the compensator. Forgot about that Aircooled, but it's not hitting. Next time I get a chance to go to the range, I'll try pulling the weight. But does that sound about right for the distance of the ejected shells to land about 15' at the shortest? That's where they landed, not where they bounced to. I'm 6'2. Seems to me that this is very strong ejection, but I'm new to the PCC's. I don't have a video shooting it. I live in the city. I just can't pull it out and shoot. I have to go to the country or local range
-
I checked my order and it is a carbine length JP spring that they recommended for my build. Now, when I said recoil was bad, I was talking about compared to the 9 mm pistols I shoot. Not as in like a 308 or 30-06! I did not have a lot of time to shoot it yesterday. But, at 40 yards, double taps were a good 24" high with the second shot when I pulled the trigger as fast as I could. As reference, I shot Expert in IDPA when I used to shoot it. I'm not speedy gonzalez but I'm not in slow motion either. If I had to guess, muzzle is jumping a good 3" with not a rock solid hold, but a firm more relaxed hold
-
My PCC recoils quite a bit with lots of barrel jump. I'm running the Blitzkrieg AR-15 9mm Hydraulic Buffer with their recommended recoil spring, Spinta precision 9mm bolt, 16" barrel and comp. Initially I shot it a few times without the comp. Everything runs great. But recoil for this thing is severe in my opinion. People talk about their dot hardly moving. Mine jumps all over the place and seems to be getting a little worse than better now that I have a comp on it. Does the hydraulic buffer have any hydraulic tension on it when you collapse the piston? Mine seems to not have much tension or resistance. It doesn't just slide haphazardly when you tilt it, but there isn't much resistance at all. Wondering if I have a defective one? My empties are ejecting approximately 15 feet between 3 and 4 o'clock. Power factor is running about 135 on these loads.
-
I love mine. But I'm glad I have place for my shooting bag and a small 6 pack cooler
-
3 hours ago, Hammer002 said:
Um...if that bill passes there will be no wait because will no longer need the stamp. No?
they'll be selling so fast, everyone will be sold out. There will be a production back log
-
about the time they get the wait times under control, they'll pass the hearing bill, making silencers legal, and there'll be a 8 month wait for cans!
-
30 minutes ago, Aircooled6racer said:
Hello: That is a pretty heavy spring. The CS100-M10 is only 16 in/lbs and the CS100-M11 is only 14 in/lbs. Thanks, Eric
I must have missed something. The one Max originally posted was 25 lb rated load http://www.smalley.com/wave-spring/cs100-h7
Heres one at 12 lb for those wanting lighter and still 1" OD https://www.amazon.com/Multiwave-Washers-Stainless-Spring-Capacity/dp/B0085ZP0CU/ref=sr_1_2?s=industrial&ie=UTF8&qid=1504054480&sr=1-2&keywords=multiwave+washer%2C+1"+diameter
-
-
doesn't the heat from brazing the spring take the temper away from it causing it to not hold tension?
-
ROFL! Age old bitchfest! Seems the same thing happens in every sport when rules are modified. Any organized sport or function will have the long-termer's unhappy for the most part when the rules change. Sometimes their complaints are verified, sometimes, not so much. Time and tolerance are the only things that allow things to settle.
-
5 hours ago, gnhowell1 said:7 hours ago, gnhowell1 said:
Compressing the SCS. The weights move fine but then pressing capture rod back enough to clear the rear of the so you carrier.
so you put it together without the buffer retainer? I would imagine if that is the case, your only option is to unscrew the buffer tube and take the pressure of your buffer.
-
7 hours ago, 1911luvr said:
Wow, that's a super light load! What bolt and buffer are you running?
Sent from my iPhone using TapatalkI'm sorry, meant to include that. I'm running a Spinta blem bolt and a Blitzkreig hydraulic buffer and the 308 recoil spring that comes with the package.
-
Max, are you using the spring that is recommended with the Blitzkrieg? I just put one together using a Spinta bolt and Blitzkrieg hydraulic buffer.
-
I got to try out my newly assembled 9mm. Ran about 10 different loads through it with the Hiperfire 24C and it ran like a champ. I even ran a mag of some powder puff 124's that crono'ed at 849 average though it that I loaded for my 9 year old daughter to shoot, so that's what a 111 power factor. No issues with anything! Now, I just wish my damn eBay comp would arrive so I can shoot steel plates with it this weekend
-
yep, the hammer spring is bent. I had originally typed that but I guess when I edited it, I deleted it.
-
thanks ddfelix! I did send you an email with a couple pictures. I did figure out my problem and it was not the companies fault. It was either in shipping or it was me during installation (which while I suppose is a possibility, I don't believe I was the cause of it.
-
thanks, I'll do a reinstall and take pictures prior to trying to reach their service. I've already tried reinstalling them about 4 times. The silver springs work like a champ. Its just the other ones seem like they create too much resistance, or are torquing the hammer in such a way to not let it release.
I'll let every know what's up.
-
basic milspec safety. Wouldn't know what to take a picture of its so crowded in there. LOL All pieces were seated properly and the rods were sliding through the retainer pin as they should.
-
Installed the new 24C in my GUN POINT - 9MM BILLET M9 lower receiver. Everything works fine with the middle spring. Wanted to try it with the lighter breaking springs (which appear to be heavier silver springs) and the trigger just locks up. Took awhile to figure out how to get it apart to put the middle springs back in. By gently forcing the hammer forward while pulling the trigger, it would release, but not on it's own. Put the middle springs back in and it all works fine. I made sure I had the two little spring support rods facing correctly, so that's not it. Anyone have any ideas what's up? What I did wrong? I know I can call customer support if I have time tomorrow when I get home from work, just thought someone else might have ran into this.
-
Was going to order the MBX today bit their backordered so I'm gonna try one of the hydraulic buffers on this build
Sent from my SM-G935V using Tapatalk -
do they send you additional weights so you can tune it when you purchase the JP bolt?
-
if the S&W lower would have been available when I ordered mine, I would have liked to try it. But, unfortunately, I don't trust back orders when I'm making decisions
.
40S&W PCC....are you nuts!!!!
in Pistol Caliber Carbine
Posted
LOL, I've been pondering a 357 Sig in a PCC. I'd love to see these more common