pharoh
-
Posts
60 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by pharoh
-
-
Just received a new one for tanfoglio's, smooth as silk out of the box,
I would say the holster might be a smidge out of spec, id say with use it should break in nicely. Keep doing some dry fire drills with it
-
Nice piece, welcome to the tanfo club :-D
-
They are basicly good to go out of the box, just double check all screws to make sure there tight.
Sweet holster, I love the one for my shadow
-
I have one for my cz shadow and I like it a lot. very secure and smooth.
-
I run my trubor at 173-174pf with hs6 (8.0gr) with 124gr fmj's and it feels great
-
Hp38/231 for minor, autocomp for major
-
Also make sure the firing pin block is nice and clean so it moves freely in the slide (if u run with one)
-
That is correct, the left side is the only one with a really small spring in the shadow.
-
:-( the creator should make one for the czeckmate "wink wink" would be cool
-
Would be awesome to try one of these on my soon to own czechmate :-)
Would be sweet to be the first one in canada to sport this optic
-
Ive used both ghost ultimate and stinger with great results with many different firearms. I like the smooth draw of the ghost compared to others
-
if the pistol functions good with the .001 clearance i would prob leave it like that. the tighter lockup will/should help with accuracy. **make sure** to check the barrel and slide after each string of 25-50 rounds to make sure the metal is not peening any wheres.
-
True true, thanks for the information
The brass condition to me looked normal, no bulging at the base. I find my on my dillon once i complete a round it has the coke bottle look to it a bit and u can see where the projectile stops so i should not get any setback. I tried to push the bullet in on my bench to check the tension of the case mouth and the oal doesnt change.
I think i should be good :-)
-
Cant find the answer on other forum so ill ask here.
I found a load that i think is just awesome for ipsc prod, but im kinda scared to use it (a bit)
Using eaa/tanfoglio stock 2 & 3 i came up with this load:
3.9gr of n320 oal of 1.055-1.058 1060-1070fps
Ive never loaded such short ammo in 9mm but thats as long as both barrels will take with hp's.
I'm using federal spp and i dont get alote of presure but i start seeing the breach face tool marks on the fired rounds. (no primer flow)
Would i be safe in using this? (with good brass of course)
-
I see I see, I did try a speer plated 147gr flat point but I was only able to load it to about 1.110-1.115, I guess my barrel has a very short throat
-
I tried searching but could not find anything, to all the tanfo stock 2/3 small frame owners: in your experience have any of you had issues running 124gr hollow points in these tanfo's?
I tried a few this weekend (25 rounds I reloaded) with no issue, but I had to load my ammo really short (with the hollow points) set at 1.075 oal under 3.8gr-3.9gr of n320 (running at 1060fps, very minor pressure signs using federal spp). I've never loaded such short ammo before and for the little bit I did load, I didn't have any malfunctions. But again that was only 25 rounds,
Should I stick with round nose to accommodate longer oal, or would I be safe in using the hollow points with this oal? The accuracy with the hollow points was pretty nice at 15 yards compared to the round nose + the lower powder charges save on my n320
What do you think ??
-
Fyi everybody The extreme guide rod is on the tanfoglio extreme parts list so its production legal :-)
-
off topic a bit but I've tried all 3 in 9mm major and hodgon longshot was the winner for me. The 3 you mention I found its hard to compare them because they react different in all open pistols (dif comp designs etc)
the only way to tell what you like is to try a 1lb of each in your pistol and see what you like best.
-
my vote goes for the ghost ultimate, I've been using one for 2 years over multiple different pistols/platforms and its the best. Secure and fast
-
Received this piece a few weeks ago
STI Matchmaster 9mm major with a few changes
-
very nice
-
Is anybody having issues as well trying to do a search? For an example in the reloading section I try to complete a in-forum search for "HS6" powder and it says no results??
I even tried to search cz shadow and no results also?
Oh and I'm using google chrome,
-
best purchase i ever made :-) i tried a couple other brands but they dont compare in quality and simplicity to the pro chrono
-
i know titegroup has been discused a tons, but i need to ask for opinions on my new load for ipsc production:
after tons of testing with lots of diferent powders i think i found a winner "finally" the load is 3.2gr of titegroup under a speer plated 147gr bullet set at 1.125-1.128 cci 500 spp
the groups i get out of my tanfo stock 3 were pretty good at 10 metres, out of a 10 shot group i had 6 rounds in the same hole and 4 less then a inche away(prob my fault). (load is going about 135 power factor)
im just wondering if my lenght seems low compared to other people? all the others ive searched seems to load out to 1.140-1.160
has anybody had problems loading this low oal? i dont see any pressure signs on my primers but we all know how cci's are harder in general.
Got my Salomon's early for Father's Day!
in Gear & Accessories
Posted
Second or third season since ive had mine and I must say they are the most comfortable shoe ive used yet. Great for dry or muddy conditions