Jump to content
Brian Enos's Forums... Maku mozo!

MARKAVELI

Classifieds
 View Profile  See their activity

  • Posts

    626

  • Joined

  • Last visited

 Content Type 

Posts posted by MARKAVELI

    Single stage -VS- Progressive

    in Miscellaneous BEginners

    Posted

    I had 2 XL650's and the LNL and decided I only needed two loaders. I sold an XL650.

    I've loaded on a SDB, 550, 650 and a Super 1050. I own what I like XL650. I also own a Hornady LNL. Is it as good as the Dillon, yes, is it better, well at some things it is and some things it isn't. Its like the classic argument between a Ford and a Chevy.

    With the .223 I think I would do the LNL without the case feeder. In fact I don't only think it that is what I use when I load my .223. 38 Super Comps on the Dillon, 9 major on the LNL, 45 LNL, 40's on the Dillon, 30 Carbine on the LNL, and so on, I have the parts to load all on either one. The Dillon stays set up for one caliber that I load consistently over time, the Hornady is easy to change and like mentioned has lots of open space its simple to setup and adjust, so it gets all the smaller batches aka I run a 1000 45's a couple times a year, and a 1000 9 mm minor etc. The Dillon does about 500 38 Supers every week year round.

    Price wise you can start off with the LNL for less money, last time I was in Cabellas they had them on the shelf for $329 (I think it was fathers day). The LNL powder measure is the best, no contest. iF you add a case feeder later you are at the same price point with the XL650 so roll the die flip the coin just get one and get started, those two are the best on the market. If you go Dillon get it from BE.

    I PICK CHEVY! Lol... I just left from there and had a classic for 99.99! But I still would go 550! What ever press you decide, again you will love the hobby.

    Single stage -VS- Progressive

    in Miscellaneous BEginners

    Posted

    Get the 550. I've loaded hundred of thousands of rounds without the auto-index of a 650 and haven't loaded a double charge yet. Blaming a reloader for a double charge is like blaming a gun for a murder.

    The 550 is easier to learn with and easier to change calibers with. I've taught brand new reloaders on this machine and never had a problem. If you want to upgrade after learning how to reload, you can either keep the 550 as a secondary caliber reloading machine or sell it. I've never seen a used 550 not get bought almost instantly.

    BTW, 650's have their issues too. They like to explode primer tubes. Different mechanism on the 550 and not prone to the hole-in-the-ceiling experience.

    + 1 you would have to "NOT" be paying attention when reloading and I think the only difference between the 650 & 550 is auto indexing! Not saying not to get the 650 or 1050 but why spend all the money on eather of those two when you can spend it on your components you are going to need and you can never have enough components! The more the marryer!!!

    New guy from Bloomington, IN

    in Introduce Yourself

    Posted

    Hello! I'm a recent graduate of Indiana University (also gainfully employed with the school) in Bloomington, IN.

    Went out to my first USPSA match earlier today, had a blast. Also realized I need a LOT of practice. Now if I can just get some range memberships... :)

    Welcome from NW Indy!

    What parts do XD9s tend to break?

    in Springfield (XD)

    Posted

    I think the same guys you are hearing about XD problems from are the ones that will tell you that you need at least a Les Bauer or Nighthawk 1911, in the $2k range. The idea that a "plastic" gun can cost $500 and run reliably must hurt their pride. My XD40 tactical has put about 12k rounds downrange with the only failures being one extraction failure when I was experimenting with bunny fart loads and had not changed the spring. After I got the power factor back in the legal range it has not had a single issue since. I did have one mag failure. I dropped it in the parking lot and did not see it until after I had backed over it. It still feeds well but the bent edge does not let it drop free. If you buy a 9mm tactical and do not like it let me know when you are ready to sell it!

    I agree! And if anyone is also unhappy with their XD's or glocks let me know ill take em and shoot the hell out of em! Lol!

    Single stage -VS- Progressive

    in Miscellaneous BEginners

    Posted

    I've recently started shooting USPSA and I've discovered that I really need to start reloading.

    I asked around at my club and half the guys recommended starting with a single stage press (like an RCBS Rock Chucker). The other half recommended jumping in with a Dillon 550 or Lee Loadmaster.

    I know the basics about reloading. I've never actually reloaded though. I have no clue what equipment I need to start, but before I can start researching, I'd like to know what you'd recommend: Single Stage or Progressive for a brand new reloader?

    Thanks!

    1st of all,shooting competition you got ta practice for the competition and there is the actual competition then you gotta think how much you will be shooting and how many calibers? I am a newbie to reloading what do i know? I know its addictive and I just wonna load and not stop loading! I am using a RL550B from Brian Enos I went with that model cause I plan on loading rifle more than 1 caliber and I can run it like a single stage press! Those are my reasons why I chose progressive loader and you might wonna look into a 550, and if you look through brian enos web site they have "QUESTIONS & FACTS" read on be for you choose. You might wonna look @ BRIANENOS.COM they have the "EZ BUY Package" that comes with every thing you need to start loading! Dillon presses are backed by their no bs warranty and they keep or hold their value and that's what I like, what ever press you you get have fun and be safe, but if you choose Dillon buy from Brian E, if you don't be leave me call Brian he will tell you what way to go! Why not he's just a 15 + USPSAC!!!!

    New SDB...New to Reloading

    in Miscellaneous BEginners

    Posted

    The only powder I use for 9mm and .45 ACP is Unique and I can get +-.1 gr. all the time. This is how I did it. I took the powder bar out of the hopper and took it apart. I polished the interior areas of the bar and the front surface of the insert very well with JB polishing compound on my Dremel tool. I polished it until it was shiny and very slick feeling. I reassembled the whole thing and the powder flow improved greatly. I have noticed that some interior edges of some powder bars aren't very smooth and will cause the flakes of Unique to apparently drag as they flow through and cause irratic measurements. I have also noticed that my powder measurements are more consistent if the powder hopper is at least 1/2 full and 3/4's to completely full is better. I don't know exactly what effect that has on it but it is just my observation. Grounding your press against static electricity also helps.

    You polished the entire bar all around?? Even the part that moves when you adjust the measurement when you turn the screw? Lol.. Great idea!

    New SDB...New to Reloading

    in Miscellaneous BEginners

    Posted

    It all depends on the bullet weight. I load 5.6 of PP with a 180, very nice shooting, but I've never chronied it. Loading that hot, without shooting USPSA, you are just burnng powder and wear and tear on the gun. Load them down a bit.

    The bullet is Hornady Xtp/JP 155gr ! I original wanted to load 180gr bulletbut they where all sold out at basspro & cabelas and I just wanted to load for my 40 asap! Kids we are so in a rush to grow! Lol.. What is a safe Load for that weight?

    Just Joined

    in Introduce Yourself

    Posted

    Just joined. Figure this would be a good place to go when I have questions about Dillon 1050s. Not into competitive shooting, just reloading and shooting for personal enjoyment. One thing I have to watch out about is I am told sometimes I come across as belligerent. I'm not, and I can't really change who I am...

    Hmmmmmmmmmmmm! Not into competition?

    New SDB...New to Reloading

    in Miscellaneous BEginners

    Posted

    @ Grumpyone, I figured that much cause of the recoil, I felt pressure and I know I a lined my sights but was still off I thought it was cause I was nervous, so I had to re group and my second set of 9rnds was grouping but not how I was expecting I'm going to lower the powder a few tenth's or try at least 6.8 or 6.7, what is your opinion on that?

    New SDB...New to Reloading

    in Miscellaneous BEginners

    Posted

    +1 on Unique metering poorly. We gave up on trying to get it consistent. HP38, PowerPistol, or any other spherical powder seems to meter much more consistently and might be an easier place to start.

    Been loading for 20 yrs & this guys absolutely right.

    I'm not going to start what powder is great or better, but as a newbie and also just started re loading I like power pistol powder so far I just gotten setup to load for my .40 cal and when I got to the measurement goal it was on it (7.7),! It fluctuated +1/-1 tenth! I'm still going to try others like HP38. I just wanted to share this with you all so I hope this might help!

    Crimp?

    in Miscellaneous BEginners

    Posted

    Thanks so much you guys have helped a lot. I did a bunch of bullets (the first ones I ever did just recently)the accuracy and the keyholeing was atrocious. Checking my crimps I see that I am about .417" and I can see where my crimp is rolled into the bullet. I look at factory loads and barely see any crimp. I guess this afternoon I will be pulling bulets. At least I save the cases and primers form this blunder. I loaded 500 and have shot about 100 of those. Thanks again. I will be anxious to see how the next batch turn out.....

    What kind of bullet are you using How many grains does you bullets weigh? I too just made a batch of 50 completed cartridge's and I caught the crimping problem my 1st 3 completed rnds, I had em crimped at .417 pulled em and got em and adjusted my crimp to about .419.... Hornady xtp/jp 155gr cci small pp and mixed range brass filled with 7.7 gr of power pistol powder! Went to the range Sat. Tested em, no "key holing" their was some recoil but I was shooting it from a sub compact, my 1st 9 rnds was over 10in my 2nd was about 6 @ about 15 yards guessing! Just wanted to share this with you all!

    Colorado Via Brooklyn NY here

    in Introduce Yourself

    Posted

    Just wanted to say hey. I just did my first IPSC competition last week. I have to say that I have not been high on life in a while and that day made it happen. I ran the gamut of feelings that day and it was great.I just moved to Colorado 4 years ago and wanted to move back home until I put a pistol and rifle in my hands.Now I am hooked.

    I hope to get some help so I can at least move a little faster next time.

    Be Blessed

    Ray

    Welcome to the forums! Great to hear how much fun it is! Good luCk and be safe!

    New shooter from FL

    in Introduce Yourself

    Posted

    Following this site a couple of days and was really surprised how many people to help needs. Not someting I am used to, but it is certainly the highlight of this sport. I asked some information about USPSA and within 24 hours of phone calls. I had my state director and the director of my local chapter offers tips, advice.

    Ya this forum is great! Like an extension of my family! Lol. Nox - haven't forgot about you! And ill take care of that in a lil... Okay?

    Crimp?

    in Miscellaneous BEginners

    Posted

    The push on your bench is a good test. To measure with the calipers, measure as close to to lip of the brass as you can get and use the "knife edge" or tip portion of the calipers, closing them tight. For OAL I use the broader portion of the calipers, although it probably doesn't really matter which you use if you don't push the tip portion into soft lead of the bullet.

    Thanks slim as long as it touch's the brass and bullet for oal and it touch's with the "knife edge" or tip when measuring the crimp!

    Crimp?

    in Miscellaneous BEginners

    Posted

    Thanks fellas, so in most cases oal of my crimp is .420! I got a Gage that came with BE's complete setup. And when I measure the crimp using my caliper. Do I use the tip and do I close in on the caliper tight measure? What about when I check the oal of my completed cartridge? Do I measure using the tip or the flat part of the caliper?

×
×
  • Create New...