Outsydlooknin75
-
Posts
833 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Outsydlooknin75
-
-
Look at the bolt head itself....use a set of number gauge drill bits.....I bet you'll find the one that craters has a larger firing pin hole than the other. Also look at firing pin diameter.
You can have the bolt head drilled bigger and bushed if you are that worried about it, but it's normal primer flow I would suspect.
Sent from my SPH-L710 using Tapatalk 2
-
I have a lot of respect for this man right here and can't wait to see him at Rockcastle in a month or so.
Sent from my SPH-L710 using Tapatalk 2
-
I called Mossberg twice and you have to buy the whole trigger assembly to get a lifter plus you have to have a FFL to buy it.
In my email I told them I bent it......if nothing else I'll have run and it to the shop down the road for me.
Sent from my SPH-L710 using Tapatalk 2
-
I had previously emailed them and got a reply to call and ask for tech support...my email was returned by Santa Hernandez
Sent from my SPH-L710 using Tapatalk 2
-
The ones for 45 make excellent reloading blocks for .223 .308 and other rifle cabilers.
Yup, I've got a steak of them I use as leading blocks
Sent from my SPH-L710 using Tapatalk 2
-
I will be calling Mossberg tomorrow, my stock pad is coming undone and I'm gonna see if I can get a lifter as well.
Sent from my SPH-L710 using Tapatalk 2
-
I had a gun shop give me a box of ammo and a t shirt once. Does that make me a pro? My best finish was 11th out of 10 in HI at Midwest 3 Gun in 2006.
I hope since 3 Gun Nation Pro and Semi Pro is TO only this match will be anything BUT TO?
That would be awesome if it was anything but TO, and separate irons, and 1x.
Sent from my SPH-L710 using Tapatalk 2
-
Jan
Feb
02/09 - 02/09 3-GunNation Pro Series Qualifier match. St. Augustine, FL
Mar
03/22 - 03/24 Superstition Mystery Mountain 3-Gun - Rio Salado Gun Club, Mesa, Arizona
03/30 - 03/31 Johnson 3-Gun - Johnson 3-Gun RO clinic/match - NRA Whittington Center, Raton, NM
Apr
04/04 - 04/07 Noveske Area 2 Championship, a Level III USPSA MG match in Byers, Colorado
04/04 - 04/07 Benelli Rockcastle Shotgun Championship
04/13 - 04/13 3-GunNation Pro Series match #1 Glengary, WV
04/19 - 04/21 Surefire Texas Multigun Championship, Liberty Hill,TX
04/24 - 04/28 USPSA Multigun Nationals in Las Vegas, NV
May
05/18 - 05/18 3-GunNation Pro Series match #2 Tulsa, OK
05/17 - 05/19 CMMG Midwest 3 Gun Championships, Fayette, MO
Jun
06/02 - 06/04 MGM Ironman Open, Limited, Heavy Optics, and Trooper 3 Gun
06/06 - 06/08 MGM Ironman Scope Tactical 3 Gun
06/14 - 06/16 2013 TFD/AIM 3 Gun Championship, Blakely, Ga
06/22 - 06/22 3-GunNation Pro Series match #3 Tulsa, OK
06/29 - 06/30 He-Man National 3-Gun Championship at NRA Whittington Center, Raton, NM
Jul
07/05 - 07/07 Rockcastle International 3 Gun Challenge
07/06 - 07/07 G3G Practical Shotgun Challenge at The World Shooting Complex, Sparta, IL
Aug
08/01 - 08/03 Rocky Mountain 3-Gun at NRA Whittington Center, Raton, NM
08/22 - 08/25 AR15.com Rockcastle Pro Am 3 Gun Championship
Sep
09/06 - 09/08 BudsGunShop.com Rockcastle Xtreme 2-Gun
09/07 - 09/07 3-GunNation Pro Series match #4 St. George, UT
09/19 - 09/21 FNH Multi-gun, Peacemaker Range, Glengary, WV
Oct
10/04 - 10/06 2013 Fallen Brethren 3Gun Challenge
10/17 - 10/19 2013 Blue Ridge Mountain 3-Gun
10/31 - 11/02 Rockcastle International Multi Gun Pro Am
Nov
Dec
-
You trash that piece of brass
Sent from my SPH-L710 using Tapatalk 2
-
I always made friends with the guy who had a range finder in my squad untill I bought my own.... Now I have friends.
I'm glad I can say you are my friend :-)
Sent from my SPH-L710 using Tapatalk 2
-
My uncle made some with moose one year that was some good stuff
Sent from my SPH-L710 using Tapatalk 2
-
One of the new rule changes for 2013:
"in 2013 3GN Semi-Pro competitors must shoot Tactical Optics in order to earn 3GN Semi-Pro points"
EPIC Fail. I guess I will just sign up for divisional. I hope this doesn't goat screw the other divisions though. Hate to think that nobody will be shooting Open or Heavy because 3GN wants everyone to shoot TO. Sucks too, because you can't sign up for divisional and amateur, just divisional and semi-pro.. how f*#king stupid is that.
If what 3 Gun Nation is doing is so terrible why not just shoot outlaw matches for fun and not sign up? That's what it's all about anyway, having fun, right?
I still don't understand the logic behind not wanting to shoot TO to become a pro when becoming a pro means you have to shoot only TO. If TO is so terrible why would you want to be a Pro at all?
I wanna be a pro tac irons shooter like Kurt and Trappr
Sent from my SPH-L710 using Tapatalk 2
-
Negative, look at the rule book it shows whet grip tape is allowed......basically just the sides of the grip and not all the way around
Sent from my SPH-L710 using Tapatalk 2
-
Highsider, can you link to the particular "how to clean and lube a 930" post that you referred to? Would appreciate it. Got my lifter back from C-Rums and can't wait to get back to the range with it! Also have a set of extended tubes coming. Will update when I've shot some more. Thanks for all the input, guys!
After reading up on this forum about how to properly clean and lube a 930, (thanks Billy)' I went back and wiped down the moving parts to eliminate the excess oil on the bolt, piston and gas rings. I'm used to lots of oil being a good thing, my baretta 92f likes to run wet.
Biggest thing that needs cleaned is the rings on the piston......take them off the piston and clean them spotless to the point when put back on the piston they rattle.
Sent from my SPH-L710 using Tapatalk 2
-
Do yourself a favor. Tear down your shotgun and take the rings off the poison in the lug under the barrel that slides over the mag tube and clean them spotless then put them back on and put your gun back together.
Sent from my SPH-L710 using Tapatalk 2
-
My mind has changed since I posted here. Get the JP.
Pat
What got you off the Noveske kool-aid? Geissele S3G now Noveske, next thing you'll be posting the Titan comp was a bad decision. It's TEOTWAWKI.
Don't forget that he is gonna give up the Saiga too.....
Sent from my SPH-L710 using Tapatalk 2
-
There is a rhythm edition for sale on theoutdoorstrader.com .....might be able to talk the guy into shipping it
Sent from my SPH-L710 using Tapatalk 2
-
Has the bolt been ramped?
Sent from my SPH-L710 using Tapatalk 2
-
The compression force of 12" of stock spring vs a Nordic spring is much different, due to much thinner wire used in stock spring. I would expect the stock spring should work with XL or even XXl caps as Mossberg uses the same spring in both JM versions, according to the tech I spoke with. Would not cut the original as it feels super soft compared to aftermarkets named above, so loading is easy, and a failure to feed may result. Not sure what is gained by going with the aftermarkets unless the original takes a set. Am open to be educated if I am missing something.
Mark
My 930 started life as a stock shotgun, want a JM edition so my stock spring was too short
Sent from my SPH-L710 using Tapatalk 2
-
Someone said on another forum that the mag well is out of spec and pmags won't stop free.
Any truth to that?
Sent from my SPH-L710 using Tapatalk 2
-
Hmmmm might have to RO this
Sent from my SPH-L710 using Tapatalk 2
-
Perhaps if the stage designers put the slug targets at the very end of the stage and prohibited loading slugs at the start, it would prevent the safety/engagement problem???????
To me that kinda sounds like dumbing it down.I don't want to see match directors dumb it down. Hell I'd like to be able to shoot a popper with buckshot if it's got flipped clays on it to throw the clays further in the air to give more time on them.....but that's not happening
Sent from my SPH-L710 using Tapatalk 2
-
I've got a 930 with a choate plus 10 or whatever it is to give me 10 in the tube with a Wolff spring that I cut. Choate springs just dont last, they are super soft to load they just wear quickly I found with my shorter tube for USPSA matches. So now I run the Wolff springs.
Sent from my SPH-L710 using Tapatalk 2
-
Im working on building a quad stack single stack mag holder for a shooter shooting heavy metal next year. The outer 2 mags are going to sit abouta half inch or so higher than the inner 2.
Sent from my SPH-L710 using Tapatalk 2
2014 TASK FORCE DAGGER 3 GUN CHAMPIONSHIP - March 28-30, 2014 - Legion
in Multi-Gun, Rifle & Shotgun Match Announcements
Posted
I'll take the perch up in top of the sniper tower again.
Sent from my SPH-L710 using Tapatalk 2