steven t
-
Posts
61 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by steven t
-
-
I don’t have a large TXG grip, but am using a couple of the regular large X5 grips on full size P320s.
I need to order a TXG for my X5 legion. The large grip isn’t much bigger than the medium but makes
a big difference for me in hand.
-
Phil Strader mentioned something new on a Humble Marksman video not to long ago.
I was thinking it would be competition oriented. . Personally I would love a 320 Maxor X-5 in .40 for limited.
-
Apex Tactical also makes a plate with or without integrated rear sight.
https://www.apextactical.com/apex-optic-mount-for-aimpointr-acro-p-1
I am unsure about shipping to Australia, perhaps they have a vendor there.
-
I would like to see a large TXG grip module.
-
Hope every thing works out. Have fun with it!
-
12 hours ago, Solsand said:
Great answers regarding the “stiff” take down lever, but has no one had issues with the slide getting stuck about a 1/2” or so off the end?
Are you talking about when reassembling? If so you might need to lift up on the rear of the slide and possibly move it around a bit. Two of my P320s do this. It was never an issue until Sig did the recall. I believe it has to do with the new disconnecter .
-
-
I just move the guide with my finger, it will move around. I line it up basically straight and turn the takedown lever. It is a bit of a pain initially but it’s pretty simple one you do it. Putting it back together has never been a problem. Just make sure you have it pushed up against the barrel.
-
pcs352 just got home and looked there isn't a part number on my holster or on the bag it came in. Must be top secret info. Glad to help, it was kind of a PITA to track down when I was looking to order one. Safariland could probably sell a lot more holsters if their finder was a little more user friendly.
-
This is it! Just order for the VERTEK (that’s the way it’s spelled on their web sight)
-
17 hours ago, pcs352 said:
not trying to hijack this thread but can anyone provide the part number for their Safariland ALS Elite LTT holster? The holster finder on Safariland's website claims such an item does not exist yet I know they do! Called Safariland and they were absolutely no help. Totally frustrating.....Thanks guys for any help. My shootin' iron needs a place to sit!
I just ordered the one for the Vertec. It fits both my LTT and M9a1. I will look at it when I get home on Sunday and see if there is a part number on the holster. I ordered the 7378 (I believe) belt loop also came with a paddle, from Holster Ops. I ordered the cut down version.
-
Yes. The M9a1 will work as will the Vertec holster. I use a Safariland ALS for the Vertec, it fits my M9a1 and my LTT.
Edited to add: The forward portion of the M9a1 and Vertec are the same, the only difference is in the grip. Any should work. The LTT frame is basically an M9a1 frame.
-
I have an M9A1that I put Langdon's trigger job in a bag (TJIB) in, and an LTT pistol that Langdon did the trigger on. The TJIB is a must have for me on any Beretta I own. That said the LTT I bought with the trigger job is nicer. I saw on one of the forums that the TJIB got you to 90% of one of Mr Langdon's trigger jobs. That's pretty close in my opinion. If I owned the pistol already or was buying a used one TJIB. New I would order another LTT from Langdon Tactical with his trigger job. The trigger on my LTT is one of the best DA pulls I have ever felt. Only 2 S&W revolvers that were worked on were in the same ball park.
God I hope that slaughter of basic grammar and sentence structure makes sense.
-
Are you running a Carry/Compact top end with a Springer comp?
-
Just received my 3 back today. 2 weeks from shipped to home in AZ which is pretty quick considering how many they have to modify.
Trigger is not as good on any of them. Feels mushy/gritty and there is a noticeable catch as the trigger resets. The reset is longer as well. I almost wish I hadn't sent my production P320 back the trigger was very good on it (out of the box) now not so much. Love the P320 but I'm disappointed in my triggers considering all 3 were good and the one I used in production was excellent. I'll try to shoot them tomorrow then relube and see if they smooth out.
-
Pat Jones, Roger thanks I'll take a look.
-
You will want the Dawson extended base pads. The Ice magwell doesn't allow much magazine to protrude, the Dawson's are longer in the rear where the box allows it.I might need the aluminum guide rod too, I just ordered a new scale to be sure I can get an accurate weight.
I'm thinking I will go with the dawson ice with the gap so I don't need new base pads and a aluminum main spring housing and see what my weight is, and if needed go with aluminum guide rod and light weight grips
Pat Jones what mag well / grip combo are you running? Looks like a Dawson to me, but I am curious about the lip or step at the bottom of the grip on the front strap.
-
I would like to see the grip module become available. It looks like it could be just the thing. I hope it fits the older fcu's.
The magwell looks like it would be a improvement.
-
Steven t: I dont have a problem with the take down lever, that would merely be an asthetic thing for me, but the slide release would be an improvement to me. I have on occasions had the palm of my support hand push the slide release up and lock the slide back mid stage. I grip that b*.ch as high as possible.
I also grip as high as possible But my short little fingers make the slide the slide stop a non issue (lol) . I have large palms and short fingers so I don't hit the slide stop. Sorry I guess my answer is that the slimmer slide release is probably going to work for you, it works fine for me with short fingers and big palms. I have adjusted my grip to work with M&Ps Sig SP2022's and Beretta M9's and the slimmer release works as well as the old style. Hope this helps.
-
-
-
Sorry was going to add more but some how managed to post.
My older pistol is wearing a large grip, the newer one still has the medium factory grip. I did look at the older medium and it has the same molding as my large.
This is something to be aware of if you have the larger slide release levers. as newer modules may not fit correctly.
Although it looks like a quick fix with a file / dremel ect.
-
-
I just bought a new P320 on the 8th (Dec) and it came with the new slide release lever, but still had the older style take down lever.
The following day I pulled it apart to clean and lube. My daughters goofy puppy decided to take the takedown lever. After two hours of searching I said screw it and ordered a new one from Sig.
The one I received is the new flat style.
The grip module on the new pistol has different molding by the slide release. I'm not sure the older large slide release will fit this new grip module.
I will check it on my older P320 (bought in Oct).
If you guys think the old style slide release hurts your thumb, try stepping on it
. Of course I found it 5 minutes after I had a shipping confirmation from SIG.
. Of course I found it 5 minutes after I had a shipping confirmation from SIG.
Springfield Prodigy factory mags
in 1911-style Pistols
Posted
I bought 2 Atlas standard 140mm mags. I don’t have a lot of rounds through them,
but so far so good. They lock bag and fit my EGW mag well. I found them on sale at 75 bucks
shipped from Battlehawk armory. I would take them every time over the Springfield
mags.
https://battlehawkarmory.com/product/atlas-gunworks-9mm38sc-140mm-standard-magazine
This is what I ordered.